The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Properties and applications of palygorskite-sepiolite clays
Abstract
The palygorskite-sepiolite group of clay minerals has a wide range of industrial applications derived mainly from its sorptive, rheological and catalytic properties which are based on the fabric, surface area, porosity, crystal morphology, structure and composition of these minerals. For assessing potential industrial uses, the mineralogical and chemical composition of the clay and its basic physical and physico-chemical parameters must be determined. Then some particular properties of commercial interest can be modified and improved by appropriate thermal, mechanical and acid treatments, surface active agents, organo-mineral derivatives formation, etc. In this paper, a revision of the principal characteristics of commercial palygorskite-sepiolite clays is presented, and potential uses are suggested according to these data. New products and applications are being investigated and those concerning environmental protection in particular, are noted. Finally, possible health effects of these elongate clay minerals are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Martindale, W., & Todd, R. G. (1967) · Medical Entomology and Zoology · Cited by 1,669
The Chemistry of Clay Minerals
(1973) · Developments in sedimentology · doi:10.1016/s0070-4571(09)x7001-9 · Cited by 663
Data Handbook for Clay Materials and Other Non-Metallic Minerals
van Olphen, H., & Fripiar, J. J. (1981) · Soil Science · doi:10.1097/00010694-198101000-00013 · Cited by 534
Struktur und Entstehung des Sepioliths
Brauner, K., & Preisinger, A. (1956) · Tschermaks Mineralogische und Petrographische Mitteilungen · doi:10.1007/bf01128033 · Cited by 362
(1988) · De Gruyter eBooks · doi:10.1515/9781501508998 · Cited by 292
The Chemistry of Clay Minerals
Rich, C. I. (1974) · Soil Science Society of America Journal · doi:10.2136/sssaj1974.03615995003800010010x · Cited by 160
Ruiz‐Hitzky, E., & Fripiat, J. J. (1976) · Clays and Clay Minerals · doi:10.1346/ccmn.1976.0240102 · Cited by 85
Rodriguez, M. A. V., Gonzalez, J. D. D. L., & Muñoz, M. A. B. (1994) · Clay Minerals · doi:10.1180/claymin.1994.029.3.07 · Cited by 83
Sepiolite - Palygorskite in Spanish Tertiary Basins: Genetical Patterns in Continental Environments
Huertos, E. G., & Castillo, A. M. J. (1984) · Developments in sedimentology · doi:10.1016/s0070-4571(08)70031-1 · Cited by 82
Structural alteration of sepiolite by dry grinding
Cornejo, J., & Hermosín, M. C. (1988) · Clay Minerals · doi:10.1180/claymin.1988.023.4.06 · Cited by 82
Cited by
Traditional and new applications for kaolin, smectite, and palygorskite: a general overview
Murray, H. H. (2000) · Applied Clay Science · doi:10.1016/s0169-1317(00)00016-8 · Cited by 1,396
Structure and Mineralogy of Clay Minerals
Brigatti, M. F., Galán, E., & Theng, B. K. G. (2013) · Developments in Clay Science · doi:10.1016/b978-0-08-098258-8.00002-x · Cited by 685
Clay mineral adsorbents for heavy metal removal from wastewater: a review
Gu, S., Kang, X., Wang, L., Lichtfouse, E., & Wang, C. (2019) · Environmental Chemistry Letters · doi:10.1007/s10311-018-0813-9 · Cited by 523
Chapter 2 Structures and Mineralogy of Clay Minerals
Brigatti, M. F., Galan, E., & Theng, B. K. G. (2006) · Developments in Clay Science · doi:10.1016/s1572-4352(05)01002-0 · Cited by 460
Self-citationAdsorption kinetics of maxilon blue GRL onto sepiolite from aqueous solutions
Doğan, M., Alkan, M., Demirbaş, Ö., Özdemir, Y., & Özmetin, C. (2006) · Chemical Engineering Journal · doi:10.1016/j.cej.2006.08.016 · Cited by 372
Applied clay mineralogy today and tomorrow
Murray, H. H. (1999) · Clay Minerals · doi:10.1180/000985599546055 · Cited by 372
Polymer modified clay minerals: A review
Liu, P. (2007) · Applied Clay Science · doi:10.1016/j.clay.2007.01.004 · Cited by 352
Turan, V. (2019) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2019.109594 · Cited by 307
Sorption of acid red 57 from aqueous solution onto sepiolite
Alkan, M., Demirbaş, Ö., Çelikçapa, S., & Doğan, M. (2004) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2004.08.003 · Cited by 293
Adsorption study for removal of Congo red anionic dye using organo-attapulgite
Chen, H., & Zhao, J. (2009) · Adsorption · doi:10.1007/s10450-009-9155-z · Cited by 292
Clay nanoparticles for regenerative medicine and biomaterial design: A review of clay bioactivity
Mousa, M., Evans, N. D., Oreffo, R. O. C., & Dawson, J. I. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2017.12.024 · Cited by 286
Removal of Cu(II) from aqueous solution by adsorption onto acid-activated palygorskite
Chen, H., Zhao, Y., & Wang, A. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.03.085 · Cited by 254
Clay-based nanomaterials and their adsorptive removal efficiency for dyes and antibiotics: A review
Ciğeroğlu, Z., El Messaoudi, N., Şenol, Z. M., Başkan, G., Georgin, J., & Gubernat, S. (2024) · Materials Today Sustainability · doi:10.1016/j.mtsust.2024.100735 · Cited by 156
Application of aluminosilicate clay mineral-based composites in photocatalysis
Zou, Y., Hu, Y., Shen, Z., Yao, L., Tang, D., Zhang, S., Wang, S., Hu, B., Zhao, G., & Wang, X. (2022) · Journal of Environmental Sciences · doi:10.1016/j.jes.2021.07.015 · Cited by 117
Zhou, L., Cai, D., He, L., Zhong, N., Yu, M., Zhang, X., & Wu, Z. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00072 · Cited by 86
Properties of adsorbents used for bleaching of vegetable oils and animal fats
Kuuluvainen, V., Mäki‐Arvela, P., Rautio, A., Kordas, K., Roine, J., Aho, A., Toukoniitty, B., Österholm, H., Toivakka, M., & Murzin, D. Y. (2015) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.4621 · Cited by 21
Metadata
- Authors
- Galan, E.
- Venue
- Clay Minerals
- Publisher
- Mineralogical Society
- Published
- 1996-12
- Volume
- 31
- Issue
- 4
- Pages
- 443-453
- ISSN
- 0009-8558 (ISSN-L)
- 1471-8030
- OpenAlex
- W2154370331
- Cited by
- 651
- References
- 12
- FWCI
- 2.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.