The DOI matches its Crossref record; 305 of the 306 references it cites were found in a registry or an index.
Status and Prospects of ZnO-Based Resistive Switching Memory Devices
Open accessAbstract
In the advancement of the semiconductor device technology, ZnO could be a prospective alternative than the other metal oxides for its versatility and huge applications in different aspects. In this review, a thorough overview on ZnO for the application of resistive switching memory (RRAM) devices has been conducted. Various efforts that have been made to investigate and modulate the switching characteristics of ZnO-based switching memory devices are discussed. The use of ZnO layer in different structure, the different types of filament formation, and the different types of switching including complementary switching are reported. By considering the huge interest of transparent devices, this review gives the concrete overview of the present status and prospects of transparent RRAM devices based on ZnO. ZnO-based RRAM can be used for flexible memory devices, which is also covered here. Another challenge in ZnO-based RRAM is that the realization of ultra-thin and low power devices. Nevertheless, ZnO not only offers decent memory properties but also has a unique potential to be used as multifunctional nonvolatile memory devices. The impact of electrode materials, metal doping, stack structures, transparency, and flexibility on resistive switching properties and switching parameters of ZnO-based resistive switching memory devices are briefly compared. This review also covers the different nanostructured-based emerging resistive switching memory devices for low power scalable devices. It may give a valuable insight on developing ZnO-based RRAM and also should encourage researchers to overcome the challenges.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures
![Fig. 1 Schematic of conductor/insulator (or semiconductor)/conductor sandwich structure [43]](https://figures.cochat.ai/paper-figures/d0898ff017c94a048528a78a56a9b5ed/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-1.jpg)
![Fig. 2 Schematic I-V curves of a unipolar and b bipolar switching. Icomp denotes the compliance current, which is adopted during set process to prevent permanent breakdown [43]](https://figures.cochat.ai/paper-figures/1c625502fe3e4590ba903e90f052274f/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-2.jpg)
![Fig. 3 Transformation of filamentary into homogeneous resistive switching by applying reversed bias with high (Icomp) in Pt/ZnO/Pt device. The insets in the left and right figures are TEM images of the device before and after transformation, respectively [84]](https://figures.cochat.ai/paper-figures/5625c217d8924b4eaa1a93334a01f344/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-3.jpg)
![Fig. 4 In situ TEM images of the reset process using the unipolar resistive switching method. a The start of recording; b intermediate state; c final state of the ruptured filament after the reset process. d The corresponding I-V curve in red; the blue line corresponds to the forming process as a comparison. e The other conductive filament in the same in situ specimen, indicating that the switching behavior is caused by multi-filament formation and rupture. f The selected area diffraction pattern of the conductive filament in Fig. 2e. The Zn (101) diffraction spot is marked with the red circle. g The corresponding dark-field image obtained from the diffraction spot marked as a circle in the diffraction pattern (f). h The Moire fringes can be observed at the disrupted region from a high-magnification TEM image. i The HRTEM image along the (110) zone axis in the disrupted region, revealing that the conductive filaments were converted back to ZnO1 − x. j The HRTEM of the “zinc” conductive filament along the (231) zone axis has been identified. k Solid-sphere model of ZnO in a wurtzite structure along the (110) zone axis. The coordinate lines are the unit cell vectors. l Solid-sphere model of zinc in a HCP structure along the (231) zone axis. The three-dimensional schematic illustrations of m a ZnO unit cell and n a zinc unit cell, respectively, showing that the zinc atoms position remain the same as the oxygen ions diffuse out [89]](https://figures.cochat.ai/paper-figures/6c950e8b47a04f0183e0145e4121e908/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-4.jpg)
![Fig. 5 a Typical I-V characteristics of various electrode materials with TE/ZnO/Pt structures. The inset shows the schematic structure for electrical measurement of TE/ZnO/Pt structures. b The cumulative probability of V-Set and V-Reset. c The cumulative probability of HRS and LRS [163]](https://figures.cochat.ai/paper-figures/a321c397f6e84506ab9f349ffc0eb1c9/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-5.jpg)
![Fig. 6 Distribution of (a) set/reset voltages and b resistance ratios of HRS/LRS at different O2 pressure ratio in Pt/ZnO/Pt device [52]. c Average HRS and LRS resistances and d distribution of reset current for ZnO deposited at different oxygen contents in Cu/ZnO/n+-Si device [129]](https://figures.cochat.ai/paper-figures/4d9d58a639cb406994f449dd82573322/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-6.jpg)
![Fig. 7 a Switching voltage variation of the Al/ZnO/Al structure ReRAM device a with ZnO film thickness [130], (b) forming, set, and reset voltages as a function of film thickness for Cu/ZnO/n+-Si device. Each data point was extracted from five devices. The inset of (b) is the thickness dependence on occurrence probability of the initially ON state for as-deposited ZnO. The occurrence probabilities were collected from 25 devices for each point [131]](https://figures.cochat.ai/paper-figures/9ebf5a459f0747fb87391593509745a4/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-7.jpg)
![Fig. 8 Schematic of switching mechanism of Zn(1-x)CoxO RRAM with (a) 0 mol%, (b) 2 mol%, and (c) 5 mol% of CoO dopant concentration [169]](https://figures.cochat.ai/paper-figures/0ab4dc630f834709b9c1f69a4e01c90f/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-8.jpg)
![Fig. 9 a Typical complementary switching of TiN/MgZnO/ZnO/Pt bipolar memory device. Inset shows I-V curve of one typical switching process plotted in semilogarithmic scale [153]. b I-V behaviors of cell A (Pt/ZnO/ZnWOx/W) and c cell B (W/ZnWOx/ZnO/Pt). Inset shows the corresponding device configuration. d I-V sweeps of the ZnO/ZnWOx//ZnWOx/ZnOCRS device. Inset shows the device configuration and the corresponding resistive switching for two cells. All the thickness of ZnWOx layer is ∼15 nm [154]](https://figures.cochat.ai/paper-figures/f11b41d4575949f298f850da21a153f3/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-9.jpg)
![Fig. 10 a UV-laser confocal image of inkjet-printed ITO electrodes on a GZO/spin-coated ITO/glass substrate. b Schematic of an all solution processed ITO/GZO/ITO RRAM device. c Surface profile of the top electrodes following the yellow line in (a). d UV-vis transmittance of bare glass (black), ITO/glass (green), GZO/glass (red), and ITO/GZO/ITO/glass (blue). To determine the optical properties, both the ITO bottom and top layers were spin-coated four times, resulting in a film with a thickness of ∼30 nm. The inset is a photograph of the sol-TRRAM (ITO/GZO/ITO/glass) device. The background is observed through the device without refraction or distortion [214]](https://figures.cochat.ai/paper-figures/fdf97be4ebe84bc88b331be8c11a95f7/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-10.jpg)
![Fig. 11 a Photograph of Al/ZnO/Al flexible resistive memory devices fabricated on PES substrate [232]. b Schematic illustrations of the flexible substrate at tensile strain (up) and compressive strain (down), where R is the bending radius and D is the thickness of the substrate [238]](https://figures.cochat.ai/paper-figures/623356519d854ce39a8f140e315f1e02/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-11.jpg)
![Fig. 12 a Bending effect of the TFRRAM device. Photograph (shown in the inset) of the device bent at R = 30 mm. b Continuous bending effect of the TRRAM device [233]](https://figures.cochat.ai/paper-figures/da67209add0d4651b6c7feedd121f7eb/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-12.jpg)
![Fig. 13 a A 4X4 crossbar array ZnO RRAM device stacked with heterostructure diodes. The lower inset is an image of the entire structure of the device. b Cross-sectional TEM images of the stacked contact area [247]](https://figures.cochat.ai/paper-figures/7da35c02bf7d4227b5686f5b03ecbb0b/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-13.jpg)
![Fig. 14 a I-V characteristics of the crossbar ZnO RRAM device stacked with (a) a ZnO/NiO p-n junction and b WO3/ZnO tunnel barrier diodes. Inset of a and b: equilibrium band alignment of Pt/NiO/ZnO/Pt and Pt/ZnO/WO3/Pt. Solid circle denotes electron, open circle denotes hole, and arrows denote possible conduction mechanisms of carriers. The indicated energy values in the inset diagrams are calculated based on literature values (ref. [284, 285]) [247]](https://figures.cochat.ai/paper-figures/15cbce593e5d4af58dfb157c9d9e57b6/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-14.jpg)
![Fig. 15 a Cross-section TEM image of Ti/AZTO/Al2O3/Pt structure. b Schematic of the fabricated memory device structure. c Inhibit ratio (IR) of the nonlinear AZTO-based RRAM device. d The read margin analysis indicate that the proposed IR can extend array to ~3K bits [200]](https://figures.cochat.ai/paper-figures/02f3542bbdea41ed8117e33a80c47ec2/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-15.jpg)
![Fig. 16 a Schematic of a Pt/ZnO1 − x NRs/ZnO TF/Pt resistive switching device. b Corresponding SEM image of a well-aligned ZnO1 − X NR with a length of ∼150 nm grown on the ZnO film with a thickness of ∼100 nm. c Schematic of confined recovery and rupture of conducting filaments by ZnO1 − x NRs [256]](https://figures.cochat.ai/paper-figures/b03db3a5a73f4b4d8e95af8afa1c22f3/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-16.jpg)
![Fig. 17 a, b Contact angle measurements for surfaces of the ZnO film and the ZnO1 − x NRs, respectively. c, d Corresponding endurance tests for two devices measured with coverage of a water droplet at a read bias of 0.1 V, respectively [256]](https://figures.cochat.ai/paper-figures/0130aaec89704b77b6d4a30a5bd2495e/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-17.jpg)
![Fig. 18 a Typical FE-SEM plane-view images of laterally bridged ZnO NRs. b Unipolar resistive switching of a laterally bridged ZnO NR-based memory device in the voltage-sweeping mode. c Schematic presentation of the filaments in the generated region and the ohmic conduction region [59]](https://figures.cochat.ai/paper-figures/d85be3d741f0459eb668030324755610/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-18.jpg)
![Fig. 19 a SEM image of the Cu/Zn2SnO4-nanowire/Pd device. b a schematic view of the Cu/ZTO NW/Pd device structure. c EDX mapping of Cu element for the Cu/Zn2SnO4-nanowire/Pd device in the ON state. d The corresponding SEM image of (c) [74]](https://figures.cochat.ai/paper-figures/1ccbfb4056864577a7004f36f1b6fe59/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-19.jpg)
![Fig. 20 a Three-dimensional AFM and b TEM images of one nanoisland; excluding the AFM tip effect, these characterizations show that the nanoislands are discrete and having sizes between 10 and 60 nm. c Schematic of ZnOnanoislands and a C-AFM tip used for measurements. d Threshold-like, e self-rectifying bipolar, and f ordinary bipolar I-V characteristics of a ZnOnanoisland at different current compliance. The nanoisland firstly underwent process (0) as indicated in d, i.e., a voltage sweep from 0 to 10 V under a current compliance of 5 nA. Then, the nanoisland underwent four voltage sweep processes sequentially (process (1): 5 to 0 V; process (2): 0 to 25 V; process (3): 25 to 0 V; process (4): 0 to 5 V) as illustrated in (d). Under the current compliance of 10 nA, 100 nA–10 mA, and 100 mA–1 mA, the voltage sweep processes resulted in three types of resistive switching (threshold-like, self-rectifying bipolar, and ordinary bipolar) in d, e, and f, respectively [78]](https://figures.cochat.ai/paper-figures/e517f8d2fc0f49098047c2bb35414ef6/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-20.jpg)
![Fig. 21 Time-resolved photocurrent under 0.5 V bias of Pt/ZnO/Pt capacitors at UV wavelength of 365 nm in the (a) initial resistance state (IRS), b high-resistance state (HRS) and c low-resistance state (LRS) [269]. d RS characteristics of Au-coated ZnOnanorods/FTO memory devices were verified by repeating the sequence of SET and RESET processes; each data was extracted at 0.01 V and (e) with a time to current graph by repeating the sequence of d-HRS and i-LRS under alternating illumination (at a light wavelength of 200 to 2500 nm) and dark condition cycling [255]](https://figures.cochat.ai/paper-figures/b73db49d9966455392b232b2957bb5f5/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-21.jpg)
![Fig. 22 a-d Room temperature hysteresis loops of the Pt/Zn0.95Co0.05O/Pt devices for two consecutive cycles at HRS and LRS. The anomalous prostrusion in the curves indicated by arrows in b, d. The MS (e) and HC (f) are modulated reversibly by resistive switching effects. (g) Schematic of ferromagnetic ordering based on the BMP mechanism at HRS and (h) mechanism of the resistive switching and magnetic modulation during the set process [139]](https://figures.cochat.ai/paper-figures/a4c8c1d27bc343d3b87a5ba7b94de084/status-and-prospects-of-zno-based-resistive-switching-memory-devices-figure-22.jpg)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“The low electric field region in the device could be fitted linearly for both the states of low resistance (LRS) and high resistance (HRS), and all slopes were close to 1, which showed that the ohmic conduction mechanism was compatible with the findings in previous ZnO-based memristor studies [15,27,28].”
From Addressing the sneak-path problem in crossbar RRAM devices using memristor-based one Schottky diode-one resistor array (2019) · cites this paper as [15]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Strukov, D. B., Snider, G. S., Stewart, D. R., & Williams, R. S. (2008) · Nature · doi:10.1038/nature06932 · Cited by 11,828
Memristor—The Missing Circuit Element
Chua, L. (1971) · IEEE Transactions on Circuit Theory · doi:10.1109/tct.1971.1083337 · Cited by 10,268 · cited 2×
“The element was realized in the form of active circuit which then behaves like a nonlinear resistor with memory [47].”
BackgroundRedox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080 · cited 4×
“The conduction is determined by the field-induced change of the Schottky barrier height at the electrode/storage material interface [42, 44].”
BackgroundInfluentialNanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Phase-change materials for rewriteable data storage
Wuttig, M., & Yamada, N. (2007) · Nature Materials · doi:10.1038/nmat2009 · Cited by 3,655
Memristive switching mechanism for metal/oxide/metal nanodevices
Yang, J. J., Pickett, M. D., Li, X., Ohlberg, D. A. A., Stewart, D. R., & Williams, R. S. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.160 · Cited by 2,987 · cited 1×
“Among them, inorganic materials, metal oxides, gained huge interest for the use as storage materials due to its wide range of electrical properties [39].”
BackgroundJanotti, A., & Van de Walle, C. G. (2007) · Physical Review B · doi:10.1103/physrevb.76.165202 · Cited by 2,434
Relations between the Concentrations of Imperfections in Crystalline Solids
Kröger, F. A., & Vink, H. J. (1956) · Solid State Physics · doi:10.1016/s0081-1947(08)60135-6 · Cited by 2,125
Atomic structure of conducting nanofilaments in TiO2 resistive switching memory
Kwon, D.-H., Kim, K. M., Jang, J. H., Jeon, J. M., Lee, M. H., Kim, G. H., Li, X.-S., Park, G.-S., Lee, B., Han, S., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2009.456 · Cited by 2,092 · cited 11×
“4 In situ TEM images of the reset process using the unipolar resistive switching method. a The start of recording; b intermediate state; c final state of the ruptured filament after the reset process. d The corresponding I-V curve in red; the blue line corresponds to the forming process as a comparison. e The other co…”
BackgroundMethodInfluentialOptical Properties of ZnO Nanostructures
Djurišić, A. B., & Leung, Y. H. (2006) · Small · doi:10.1002/smll.200600134 · Cited by 1,938
Research works printed but not linked: 1
- Tseng T-Y, Sze SM (2012) Nonvolatile memories materials, devices and applications, Vol. 1. American Scientific Publishers, CA. USA. ISBN:1-58883-250-3
Cited by
Zahoor, F., Azni Zulkifli, T. Z., & Khanday, F. A. (2020) · Nanoscale Research Letters · doi:10.1186/s11671-020-03299-9 · Cited by 975
Defect engineering of ZnO: Review on oxygen and zinc vacancies
Gurylev, V., & Perng, T. P. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.03.031 · Cited by 336
Fully integrated multi-mode optoelectronic memristor array for diversified in-sensor computing
Huang, H., Liang, X., Wang, Y., Tang, J., Li, Y., Du, Y., Sun, W., Zhang, J., Yao, P., Mou, X., et al. (2025) · Nature Nanotechnology · doi:10.1038/s41565-024-01794-z · Cited by 196
Recent Developments and Perspectives for Memristive Devices Based on Metal Oxide Nanowires
Milano, G., Porro, S., Valov, I., & Ricciardi, C. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800909 · Cited by 162
Improving linearity by introducing Al in HfO 2 as a memristor synapse device
Chandrasekaran, S., Simanjuntak, F. M., Saminathan, R., Panda, D., & Tseng, T.-Y. (2019) · Nanotechnology · doi:10.1088/1361-6528/ab3480 · Cited by 131
“switching layer having high resistivity is necessary to form a strong conducting filament [28]; however, the HfOx device has abundant oxygen vacancy across the switching layer (figures 4(a) and (c)), especially the region that is closer to the”
BackgroundSelf-citation
Metadata
- Authors
- Simanjuntak, F. M., Panda, D., Wei, K.-H., & Tseng, T.-Y.
- Affiliations
- National Yang Ming Chiao Tung University (TW)
- National Institute of Science and Technology (IN)
- Corresponding author
- Tseng, Tseung-Yuen
- Venue
- Nanoscale Research Letters
- Published
- 2016-08-19
- Volume
- 11
- Issue
- 1
- Pages
- 368-368
- ISSN
- 1556-276X (ISSN-L)
- 1931-7573
- PMC
- PMC4991985
- OpenAlex
- W2517852686
- Semantic Scholar
- 0a2f0dac72e50015c591aeb8c6ed793a9ae19858
- Cited by
- 244
- References
- 306
- Citations by year
- 2026: 7 · 2025: 24 · 2024: 27 · 2023: 29 · 2022: 28 · 2021: 35 · 2020: 19 · 2019: 31 · 2018: 25 · 2017: 19
- FWCI
- 1.24
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- Nanoscale Research Letters (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- ePrints Soton (University of Southampton) (submittedVersion)
- Funders
- National Science Council (NSC 102-2221-E009-134-MY3)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Materials Science › Materials Chemistry › Phase-change materials and chalcogenides
- Keywords
- zinc oxide, resistive random access memory, filamentary switching, flexible memory, non-volatile memory, metal oxide memory, electrode materials, metal doping, nanodevices, low-power memory
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Status and Prospects of ZnO-Based Resistive Switching Memory Devices. https://app.cochat.ai/papers/10.1186/s11671-016-1570-y
- The paper
- Simanjuntak, F. M., Panda, D., Wei, K.-H., & Tseng, T.-Y. (2016). Status and Prospects of ZnO-Based Resistive Switching Memory Devices. Nanoscale Research Letters. https://doi.org/10.1186/s11671-016-1570-y
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.