Analysis of polyhydroxybutrate and bioplastic production from microalgae
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Algae manufacture a diversity of base materials that can be used for bioplastics assembly. The most essential compounds are carbohydrates and hydrocarbons. Polyhydroxybutyrate (PHB) is a polymer belonging to the polyester class that is of interest as bio-derived and biodegradable plastics. In this study, three microalgal strains in addition to two microalgal biomass collected from high-rate algal ponds (HRAP) were used to detect their ability to produce polyhydroxybutrate for bioplastic production. The results showed that among the selected strains, Microcystis aeruginosa has the highest polyhydroxybutrate concentration (0.49 ± 0.5 mg mL −1 ). However, the biomass collected from the high-rate algal pond dominated with Microcystis sp. showed a higher concentration (0.7 ± 0.6 mg mL −1 ). The biomass collected from the high-rate algal pond dominated with Microcystis sp. was used for producing bioplastic since it has the highest concentration of PHB. Referring to plasticizing capacity, elongation at break (%) for algal biomass was 530% which was higher than that detected in blank which was 307%. So, it was obvious that the algal bioplastic has good plasticizing capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Micro-algae as a source of protein
Becker, E. W. (2007) · Biotechnology Advances · doi:10.1016/j.biotechadv.2006.11.002 · Cited by 2,311
Bioplastics and their thermoplastic blends from Spirulina and Chlorella microalgae
Zeller, M. A., Hunt, R., Jones, A., & Sharma, S. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39559 · Cited by 278
Cited by
Chia, W. Y., Ying Tang, D. Y., Khoo, K. S., Kay Lup, A. N., & Chew, K. W. (2020) · Environmental Science and Ecotechnology · doi:10.1016/j.ese.2020.100065 · Cited by 477
“On the other hand, Abdo and Ali [95] identified the ability of a few microalgae strains to synthesize PHB.”
BackgroundBioplastic Production from Microalgae: A Review
Onen Cinar, S., Chong, Z. K., Kucuker, M. A., Wieczorek, N., Cengiz, U., & Kuchta, K. (2020) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph17113842 · Cited by 311
The role of microalgae in the bioeconomy
Fernández, F. G. A., Reis, A., Wijffels, R. H., Barbosa, M., Verdelho, V., & Llamas, B. (2021) · New Biotechnology · doi:10.1016/j.nbt.2020.11.011 · Cited by 291
Biopolymers production from microalgae and cyanobacteria cultivated in wastewater: recent advances
Mastropetros, S. G., Pispas, K., Zagklis, D., Ali, S. S., & Kornaros, M. (2022) · Biotechnology Advances · doi:10.1016/j.biotechadv.2022.107999 · Cited by 123
“These qualities make it a viable alternative to traditional petrochemical plastics (Abdo and Ali, 2019; Ansari and Fatma, 2016; Haase et al., 2012; Rahman and Miller, 2017; Singh et al., 2017).”
BackgroundInfluentialExtraction and Characterization of Polyhydroxyalkanoates from Marine Green Alga and Cyanobacteria
Roja, K., Ruben Sudhakar, D., Anto, S., & Mathimani, T. (2019) · Biocatalysis and Agricultural Biotechnology · doi:10.1016/j.bcab.2019.101358 · Cited by 108
Metadata
- Authors
- Abdo, S. M., & Ali, G. H.
- Venue
- Bulletin of the National Research Centre
- Published
- 2019-06-18
- Volume
- 43
- Issue
- 1
- ISSN
- 1110-0591 (ISSN-L)
- 2522-8307
- OpenAlex
- W2953020437
- Cited by
- 107
- References
- 2
- FWCI
- 2.91
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Analysis of polyhydroxybutrate and bioplastic production from microalgae. https://app.cochat.ai/papers/10.1186/s42269-019-0135-5
- The paper
- Abdo, S. M., & Ali, G. H. (2019). Analysis of polyhydroxybutrate and bioplastic production from microalgae. Bulletin of the National Research Centre. https://doi.org/10.1186/s42269-019-0135-5
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.