A new approach to fitting induced-polarization spectra
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Best fitting of induced-polarization (IP) spectra by different models of Cole-Cole type evidences discrepancies in the resulting model parameters. The time constant determined from the same data could vary in magnitude over several decades. This effect, which makes an evaluation of the results of different models nearly impossible, is demonstrated by induced polarization measurements in the frequency range between 1.4mHz and 12kHz on thirteen mixtures of quartz sand and slag grains. The samples differ in size and the amount of the slag grains. Parameters describing the IP spectra are derived by fitting models of the Cole-Cole type to the measured data. The fitting quality of the generalized Cole-Cole model, the standard Cole-Cole model, and the Cole-Davidson model is investigated. The parameters derived from these models are compared and correlated with mass percentage and grain size of the slag particles. An alternative fittingapproach is introduced, using the decomposition of observed IP spectra into a variety of Debye spectra. Four integrating parameters are derived and correlated with parameters of the slag-sand mixtures and Cole-Cole parameters, respectively. The alternative approach generally enables a better fitting of measured spectra compared with Cole-Cole type models. It proves to be more flexible and stable, even for complicated phase spectra that cannot be fitted by single Cole-Cole type models. The integrating parameters are well correlated with characterizing parameters of the slag-sand mixtures. The total chargeability well indicates the mass percentage of slag grains, and the mean relaxation time is related to the grain size. The relaxation time distribution can be displayed by cumulative normalized chargeability versus relaxation time, similar to granulation curves. Anologous to the latter, a nonuniformity parameter characterizes the width of the relaxation time distribution.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dispersion and Absorption in Dielectrics I. Alternating Current Characteristics
Cole, K. S., & Cole, R. H. (1941) · The Journal of Chemical Physics · doi:10.1063/1.1750906 · Cited by 10,152
Solving Least Squares Problems
Lawson, C. L., & Hanson, R. J. (1995) · doi:10.1137/1.9781611971217 · Cited by 7,103
Cited by
Determination of permeability from spectral induced polarization in granular media
Revil, A., & Florsch, N. (2010) · Geophysical Journal International · doi:10.1111/j.1365-246x.2010.04573.x · Cited by 422
Revil, A., Karaoulis, M., Johnson, T., & Kemna, A. (2012) · Hydrogeology Journal · doi:10.1007/s10040-011-0819-x · Cited by 339
Tools and Techniques: Electrical Methods
Binley, A. (2015) · Treatise on Geophysics · doi:10.1016/b978-0-444-53802-4.00192-5 · Cited by 159
Metadata
- Authors
- Nordsiek, S., & Weller, A.
- Venue
- Geophysics
- Publisher
- Society of Exploration Geophysicists
- Published
- 2008-01-01
- Volume
- 73
- Issue
- 6
- Pages
- F235-F245
- ISSN
- 0016-8033 (ISSN-L)
- 1942-2156
- OpenAlex
- W2021229223
- Cited by
- 226
- References
- 2
- FWCI
- 3.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.