The DOI matches its Crossref record.
Displacement‐Based Seismic Design of StructuresM. J. N.Priestley, G. M.Calvi, and M. J.Kowalsky2007. IUSS Press, Pavia, Italy, 721 pp., $198.69
Abstract
The concept of designing structures to achieve a specified performance limit state defined by strain or drift limits was first introduced, in New Zealand, in 1993. Over the following years, and in particular the past five years, an intense coordinated research effort has been underway in Europe and the USA to develop the concept to the stage where it is a viable and logical alternative to current force-based code approaches. Different structural systems including frames, cantilever and coupled walls, dual systems, bridges, wharves, timber structures and seismically isolated structures have been considered in a series of coordinated research programs. Aspects relating to characterization of seismic input for displacement-based design, and to structural representation for design verification using time-history analysis have also received special attention. This paper summarizes the general design approach, the background research, and some of the more controversial issues identified in a book, currently in press, summarizing the design procedure. INTRODUCTION Viewed through the historical prism of the past 100 years, seismic structural design can be seen to have been in constant evolution – much more so than design for other load cases or actions such as gravity, wind, traffic etc. Initially, following structural damage in the seminal earthquakes of the early 20 century (Kanto, Long Beach, Napier), seismic attack was perceived in terms of simple mass-proportional lateral forces, resisted by elastic structural action. In the 1940’s and 50’s the influence of structural period in modifying the intensity of the inertia forces started to be incorporated into structural design, but structural analysis was still based on elastic structural response. Ductility considerations were introduced in the 1960’s and 70’s as a consequence of the experimental and empirical evidence that welldetailed structures could survive levels of ground shaking capable of inducing inertia forces many times larger than those predicted by elastic analysis. Predicted performance came to be assessed by ultimate strength considerations, using force levels reduced from the elastic values by somewhat arbitrary force-reduction factors, that differed markedly between the design codes of different seismically-active countries. Gradually this lead to a further realization, in the 1980’s and 90’s that strength was important, but only in that it helped to reduce displacements or strains, which can be directly related to damage potential, and that the proper definition of structural vulnerability should hence be related to deformations, not strength. This realization has lead to the development of a large number of alternative seismic design philosophies based more on deformation capacity than strength. These are generally termed “performance-based” design philosophies. The scope of these can vary from comparatively narrow structural design approaches, intended to produce safe structures with uniform risk of damage under specified seismicity levels, to more ambitious approaches that seek to also combine financial data associated with loss-of-usage, repair, and a client-based approach (rather than a code-specified approach) to acceptable risk. This paper does not attempt to provide such ambitious guidance as implied by the latter approach. In fact, it is our view that such a broad-based probability approach is more appropriate to assessment of designed structures than to the design of new structures. The
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Marriott, D., Pampanin, S., & Palermo, A. (2009) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.857 · Cited by 383
Designing timber connections for ductility – A review and discussion
Ottenhaus, L.-M., Jockwer, R., van Drimmelen, D., & Crews, K. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124621 · Cited by 83
Seismic Design of Cross-Laminated Timber Buildings
Tannert, T., Follesa, M., Fragiacomo, M., Gonzalez, P., Isoda, H., Moroder, D., Xiong, H., & van de Lindt, J. (2018) · Wood and Fiber Science · doi:10.22382/wfs-2018-037 · Cited by 77
Seismic Isolation Devices Based on Sliding between Surfaces with Variable Friction Coefficient
Calvi, P. M., Moratti, M., & Calvi, G. M. (2016) · Earthquake Spectra · doi:10.1193/091515eqs139m · Cited by 66
Metadata
- Authors
- Powell, G. H.
- Venue
- Earthquake Spectra
- Publisher
- Wiley
- Published
- 2008-05
- Volume
- 24
- Issue
- 2
- Pages
- 555-557
- ISSN
- 1944-8201 (ISSN-L)
- 8755-2930
- OpenAlex
- W2974704730
- Cited by
- 1,393
- References
- 0
- Type
- book review
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Displacement‐Based Seismic Design of StructuresM. J. N.Priestley, G. M.Calvi, and M. J.Kowalsky2007. IUSS Press, Pavia, Italy, 721 pp., $198.69. https://app.cochat.ai/papers/10.1193/1.2932170
- The paper
- Powell, G. H. (2008). Displacement‐Based Seismic Design of StructuresM. J. N.Priestley, G. M.Calvi, and M. J.Kowalsky2007. IUSS Press, Pavia, Italy, 721 pp., $198.69. Earthquake Spectra. https://doi.org/10.1193/1.2932170
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.