The DOI matches its Crossref record.
Sampled-Data Control Systems
Open accessAbstract
The methods presented in the previous chapters deal with the fundamental properties of continuous systems [1-5]. However, digital computers are available not only for the design of control systems but also to perform the control function. Digital computers and microprocessors are used in many control systems. The size and cost advantages associated with the microcomputer make its use as a controller economical and practical. Using such a digital processor with a plant that operates in the continuous-time domain requires that its input signal be discrete, which requires the sampling of the signals used by the controller. Such sampling may be an inherent characteristic of the system. For example, a radar or a missile tracking system supplies information on an airplane’s or an incoming missile position and motion to a digital processor at discrete periods of time. This information is therefore available as a succession of data points. When there is no inherent sampling, an analog-to-digital (A/D) converter must be incorporated in a digital or sampled-data (S-D) control system. The sampling process can be performed at a constant rate or at a variable rate, or it may be random. The discussion in this chapter is based on a constant-rate sampling. The output of the controller must then be converted from discrete form into an analog signal by a digital-to-analog (D/A) converter. A functional block diagram of such a system is shown in Figure 18.1, in which the signals e* and u* are in discrete form, u is piecewise continuous, and the remaining signals are continuous.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Åström, K. J., Hagander, P., & Sternby, J. (1984) · Automatica · doi:10.1016/0005-1098(84)90062-1 · Cited by 895
Sampling and reconstruction of wave-number-limited functions in N-dimensional euclidean spaces
Petersen, D. P., & Middleton, D. (1962) · Information and Control · doi:10.1016/s0019-9958(62)90633-2 · Cited by 614
PI/PID Controller Design Based on Direct Synthesis and Disturbance Rejection
Chen, D., & Seborg, D. E. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010756m · Cited by 430
A function space approach to sampled data control systems and tracking problems
Yamamoto, Y. (1994) · IEEE Transactions on Automatic Control · doi:10.1109/9.286247 · Cited by 415
Aström, K. J. (2007) · Analysis and Design of Nonlinear Control Systems · doi:10.1007/978-3-540-74358-3_9 · Cited by 395
Metadata
- Venue
- Linear Control System Analysis and Design with MATLAB
- Publisher
- CRC Press
- Published
- 2013-10-30
- Pages
- 519-550
- OpenAlex
- W1485636186
- Cited by
- 328
- References
- 0
- FWCI
- 14.90
- Type
- book chapter
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Sampled-Data Control Systems. https://app.cochat.ai/papers/10.1201/b16032-25
- The paper
- Sampled-Data Control Systems. (2013). Linear Control System Analysis and Design with MATLAB. https://doi.org/10.1201/b16032-25
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.