Cited by 119Heat and Mass Transfer in Porous MediaProcess Optimization and IntegrationAdsorption and biosorption for pollutant removal

The DOI matches its Crossref record; 48 of the 50 references it cites were found in a registry or an index.

Use of the Linear Driving Force Approximation to Guide the Design of Monolithic Adsorbents

Patton, A., Crittenden, B.D., Perera, S.P.·2004·Chemical Engineering Research and Design

DOI 10.1205/0263876041580749

Open this paper in CoChat — free account

Integrity signals

Registry

Crossref · 10.1205/0263876041580749

Cites

48 of 48 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Perry's chemical engineers' handbook
(2008) · Choice Reviews Online · doi:10.5860/choice.45-4393 · Cited by 10,121
Fluid Flow Through Packed Columns
Ergün, Ş. (1952) · Medical Entomology and Zoology · Cited by 6,992
EVAPORATION OF DROPS
(2006) · A-to-Z Guide to Thermodynamics Heat and Mass Transfer and Fluids Engineering · doi:10.1615/atoz.e.evaofdrop · Cited by 2,143
Handbook of Single-Phase Convective Heat Transfer
Martin, H. (1988) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/0255-2701(88)87007-7 · Cited by 1,620
Gas Separation by Adsorption Processes
(1987) · Elsevier eBooks · doi:10.1016/c2013-0-04269-7 · Cited by 1,578
Handbook of single-phase convective heat transfer
Kakaç, S., Shah, R. K., & Aung, W. (1987) · Wiley eBooks · Cited by 1,358
Evaporation from drops : Part II
Ranz, W. E. (1952) · Chemical engineering progress · Cited by 1,173
Theory of chromatography. Part 10.—Formulæ for diffusion into spheres and their application to chromatography
Glueckauf, E. (1955) · Trans. Faraday Soc. · doi:10.1039/tf9555101540 · Cited by 967
241. Theory of chromatography. Part IV. The influence of incomplete equilibrium on the front boundary of chromatograms and on the effectiveness of separation
Glueckauf, E., & Coates, J. I. (1947) · Journal of the Chemical Society (Resumed) · doi:10.1039/jr9470001315 · Cited by 538
Why Does the Linear Driving Force Model for Adsorption Kinetics Work?
Sircar, S., & Hufton, J. R. (2000) · Adsorption · doi:10.1023/a:1008965317983 · Cited by 476

Show all 50 references

Research works printed but not linked: 3

Bennett, 1991, Determination of heterogeneous reaction kinetics and reaction rates under mass transfer controlled conditions for a monolith reactor, Trans IChemE Part B, Proc Safe Env Prot, 69, 209
Hawthorn, 1974, Afterburner catalysts—effects of heat and mass transfer between gas and catalyst surface, AIChE Symp Ser, 70, 428
Kapteijn, 1999, Monoliths in multiphase catalytic processes—aspects and prospects, Catal Tech, 3, 24

Structured adsorbents in gas separation processes
Rezaei, F., & Webley, P. A. (2009) · Separation and Purification Technology · doi:10.1016/j.seppur.2009.10.004 · Cited by 305
A review of mathematical modeling of fixed-bed columns for carbon dioxide adsorption
Shafeeyan, M. S., Wan Daud, W. M. A., & Shamiri, A. (2014) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2013.08.018 · Cited by 293
Systems Design and Economic Analysis of Direct Air Capture of CO 2 through Temperature Vacuum Swing Adsorption Using MIL-101(Cr)-PEI-800 and mmen-Mg 2 (dobpdc) MOF Adsorbents
Sinha, A., Darunte, L. A., Jones, C. W., Realff, M. J., & Kawajiri, Y. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b03887 · Cited by 282
Polymethacrylate monoliths for preparative and industrial separation of biomolecular assemblies
Jungbauer, A., & Hahn, R. (2008) · Journal of Chromatography A · doi:10.1016/j.chroma.2007.12.087 · Cited by 227
Optimum structured adsorbents for gas separation processes
Rezaei, F., & Webley, P. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.08.029 · Cited by 210
Removal of paracetamol on biomass-derived activated carbon: Modeling the fixed bed breakthrough curves using batch adsorption experiments
García‐Mateos, F. J., Ruiz-Rosas, R. R., Marqués, M. D., Cotoruelo, L. M., Rodríguez‐Mirasol, J., & Cordero, T. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.04.144 · Cited by 209
What’s wrong with Lagergreen pseudo first order model for adsorption kinetics?
Rodrigues, A. E., & Silva, C. M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.08.055 · Cited by 183
Electric Swing Adsorption for CO2 removal from flue gases
Grande, C. A., & Rodrigues, A. E. (2007) · International journal of greenhouse gas control · doi:10.1016/s1750-5836(07)00116-8 · Cited by 161
Electric Swing Adsorption for Gas Separation and Purification: A Review
Ribeiro, R. P. P. L., Grande, C. A., & Rodrigues, A. E. (2014) · Separation Science and Technology · doi:10.1080/01496395.2014.915854 · Cited by 111
Modified Biot Number in the Context of Air Drying of Small Moist Porous Objects
Chen, X. D., & Peng, X. (2005) · Drying Technology · doi:10.1081/drt-200047667 · Cited by 95
Carbon dioxide removal using carbon monolith as electric swing adsorption to improve indoor air quality
Lee, T. S., Cho, J. H., & Chi, S. H. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.04.028 · Cited by 86
Adsorption properties of composite materials (LiCl+LiBr)/silica
Gordeeva, L. G., Grekova, A. D., Krieger, T., & Aristov, Y. I. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2009.06.015 · Cited by 86
Evaluation of the technical and environmental feasibility of adsorption process to remove water soluble organics from produced water: A review
Costa, T. C., Hendges, L. T., Temochko, B., Mazur, L. P., Marinho, B. A., Weschenfelder, S. E., Florido, P. L., da Silva, A. L., de Souza, A. A. U., & de Souza, S. M. D. A. G. U. (2021) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2021.109360 · Cited by 85
Critical Comparison of Structured Contactors for Adsorption-Based Gas Separations
DeWitt, S. J. A., Sinha, A., Kalyanaraman, J., Zhang, F., Realff, M. J., & Lively, R. P. (2018) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-060817-084120 · Cited by 76
3D printing of metal–organic framework composite materials for clean energy and environmental applications
Kearns, E. R., Gillespie, R., & D’Alessandro, D. M. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta08777k · Cited by 71
Evaluating the Feasibility of a TSA Process Based on Steam Stripping in Combination with Structured Carbon Adsorbents To Capture CO2 from a Coal Power Plant
Plaza, M. G., Rubiera, F., & Pevida, C. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b01508 · Cited by 70
Adsorption of Hydrogen Sulfide at Low Temperatures Using an Industrial Molecular Sieve: An Experimental and Theoretical Study
Georgiadis, A. G., Charisiou, N. D., Gaber, S., Polychronopoulou, K., Yentekakis, I. V., & Goula, M. A. (2021) · ACS Omega · doi:10.1021/acsomega.0c06157 · Cited by 70
A critical review on potential applications of Metal-Organic frameworks (MOFs) in adsorptive carbon capture technologies
Tao, Y., & Xu, H. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121504 · Cited by 67
On Comparing Packed Beds and Monoliths for CO 2 Capture from Air Through Experiments, Theory, and Modeling
Stampi-Bombelli, V., Storione, A., Grossmann, Q., & Mazzotti, M. (2024) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.4c01392 · Cited by 66
Carbon Monoliths: A Comparison with Granular Materials
Crittenden, B. D., Patton, A., Jouin, C., Perera, S. P., Tennison, S., & Botas, J. A. (2005) · Adsorption · doi:10.1007/s10450-005-5981-9 · Cited by 66
Self-citation
Temperature-vacuum swing adsorption for direct air capture by using low-grade heat
Shi, W., Zhang, X. J., Liu, X., Wei, S., Shi, X., Wu, C., & Jiang, L. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.137731 · Cited by 61
Values of the mass transfer coefficient of the linear driving force model for VOC adsorption on activated carbons
Chauveau, R., Grévillot, G., Marsteau, S., & Vallières, C. (2012) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2012.09.019 · Cited by 56
The 3D pore structure and fluid dynamics simulation of macroporous monoliths: High permeability due to alternating channel width
Jungreuthmayer, C., Steppert, P., Sekot, G., Zankel, A., Reingruber, H., Zanghellini, J., & Jungbauer, A. (2015) · Journal of Chromatography A · doi:10.1016/j.chroma.2015.11.026 · Cited by 51
Structured zeolite NaX coatings on ceramic cordierite monolith supports for PSA applications
Mosca, A., Hedlund, J., Webley, P. A., Grahn, M., & Rezaei, F. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2009.10.010 · Cited by 51
Zeolite monoliths with hierarchical designed pore network structure: Synthesis and performance
Hasan, F., Xiao, P., Singh, R. K., & Webley, P. A. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.02.100 · Cited by 48
Hollow Fiber Sorbents for Desulfurization of Natural Gas
Bhandari, D. A., Bessho, N., & Koros, W. J. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie100157w · Cited by 46
Adsorbent shaping as enabler for intensified pressure swing adsorption (PSA): A critical review
Chisăliță, D.-A., Boon, J., & Lücking, L. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.128466 · Cited by 41
Microchannel zeolite 13X adsorbent with high CO2 separation performance
Hedlund, J., García, G., Balsamo, M., Zhou, M. Y., & Mouzon, J. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.119483 · Cited by 41
Effect of channel geometry, degree of activation, relative humidity and temperature on the performance of binderless activated carbon monoliths in the removal of dichloromethane from air
Águeda, V. I., Crittenden, B. D., Delgado, J. A., & Tennison, S. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.01.036 · Cited by 40
Self-citation
Exploring Geometric Properties and Cycle Design in Packed Bed and Monolith Contactors Using Temperature-Vacuum Swing Adsorption Modeling for Direct Air Capture
Stampi-Bombelli, V., & Mazzotti, M. (2024) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.4c02303 · Cited by 39
Optimization of synthesis procedures for structured PSA adsorbents
Mosca, A., Hedlund, J., Ridha, F. N., & Webley, P. A. (2008) · Adsorption · doi:10.1007/s10450-008-9126-9 · Cited by 39
Effect of coating thickness, binder and cycle time in adsorption cooling applications
Duong, X. Q., Cao, N. V., Lee, W. S., Park, M. Y., Chung, J. D., Bae, K. J., & Kwon, O. K. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116265 · Cited by 37
Carbon Monoliths in Adsorption-based Post-combustion CO2 Capture
Querejeta, N., Plaza, M. G., Rubiera, F., Pevida, C., Avery, T. W., & Tennisson, S. R. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1366 · Cited by 37
Recent advances on the modeling and optimization of CO2 capture processes
Chatziasteriou, C. C., Kikkinides, E. S., & Georgiadis, M. C. (2022) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2022.107938 · Cited by 36
High-pressure adsorptive storage of hydrogen in MIL-101 (Cr) and AX-21 for mobile applications: Cryocharging and cryokinetics
Bimbo, N., Xu, W., Sharpe, J. E., Ting, V. P., & Mays, T. J. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.10.069 · Cited by 34
Adsorption properties of benzene and water vapor on hyper-cross-linked polymers
Wang, G., Dou, B., Wang, J., Wang, W., & Hao, Z. (2013) · RSC Advances · doi:10.1039/c3ra41450g · Cited by 33
Copper foam coated with CPO-27(Ni) metal–organic framework for adsorption heat pump: Simulation study using OpenFOAM
Pinheiro, J. M., Salústio, S., Geraldes, V., Valente, A. A., & Silva, C. M. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115498 · Cited by 32
A novel contactor for reducing the cost of direct air capture of CO2
Tegeler, E., Cui, Y., Masoudi, M., Bahmanpour, A. M., Colbert, T., Hensel, J., & Balakotaiah, V. (2023) · Chemical Engineering Science · doi:10.1016/j.ces.2023.119107 · Cited by 31
Tailoring 3D Printed Micro‐Structured Carbons for Adsorption
Scott, S., Chew, Y. M. J., Barnard, J. E., Burrows, A. D., Smith, M. W., Tennison, S., & Perera, S. P. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202213715 · Cited by 31
Self-citation
Modeling of adsorption process on monolith adsorbents: A mini-review
Pour, S. E., Mamaghani, A. H., & Hashisho, Z. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.128846 · Cited by 31
Comparative Study on the Water Uptake Kinetics and Dehumidification Performance of Silica Gel and Fams Coatings
Liu, L., Kubota, M., Li, J., Kimura, H., Bai, Y., Wu, R., Deng, L., Huang, H., & Kobayashi, N. (2021) · Energy · doi:10.1016/j.energy.2021.122957 · Cited by 31
Synthesis of biomorphic zeolite honeycomb monoliths with 16 000 cells per square inch
Li, G. K., Singh, R., Li, D., Zhao, C., Liu, L., & Webley, P. A. (2009) · Journal of Materials Chemistry · doi:10.1039/b912329f · Cited by 29
Dual layer hollow fiber sorbents: Concept, fabrication and characterization
Bhandari, D. A., Olanrewaju, K. O., Bessho, N., Breedveld, V., & Koros, W. J. (2012) · Separation and Purification Technology · doi:10.1016/j.seppur.2012.11.003 · Cited by 28
Multiple-relaxation-time lattice Boltzmann simulation for flow, mass transfer, and adsorption in porous media
Ma, Q., Chen, Z., & Liu, H. (2017) · Physical review. E · doi:10.1103/physreve.96.013313 · Cited by 28
Performance investigation of adsorption cooling and desalination systems employing thermally enhanced copper foamed bed coated with SAPO-34 and CPO-27(Ni)
Eissa, M. S., Elsheniti, M. B., Rezk, A., Elhelw, M., & Elsamni, O. A. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118056 · Cited by 27
Modeling of adsorption heat pump system based on experimental estimation of heat and mass transfer coefficients
Seol, S.-H., Nagano, K., & Togawa, J. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115089 · Cited by 27
Net-zero carbon configuration approach for direct air carbon capture based integrated energy system considering dynamic characteristics of CO2 adsorption and desorption
Yang, L., & Wu, X. (2024) · Applied Energy · doi:10.1016/j.apenergy.2023.122608 · Cited by 25
Modeling and simulation of closed low-pressure zeolite adsorbers for thermal energy storage
Schaefer, M., & Thess, A. D. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.05.029 · Cited by 20
Bi-disperse adsorption model of the performance of amine adsorbents for direct air capture
Shi, W., Chen, S., Xie, R. Y., González-Díaz, A., Zhang, X. J., Wang, T., & Jiang, L. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.154090 · Cited by 20
Simple high-order approximations for unsteady-state diffusion, adsorption and reaction in a catalyst: A unified method by a continued fraction for slab, cylinder and sphere geometries
Lee, J., & Kim, D. H. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.08.029 · Cited by 20
Experimental and modeling study of volatile organic compounds adsorption over zeolitic monolith adsorbent
Pour, S. E., Mamaghani, A. H., Hashisho, Z., Crompton, D., Arellano, H., & Anderson, J. E. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.148956 · Cited by 19
One-dimensional model of a closed low-pressure adsorber for thermal energy storage
Schaefer, M., & Thess, A. D. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.09.095 · Cited by 17
Analysis of commonly used batch adsorption kinetic models derived from mass transfer-based modelling
Queiroz, V., de Almeida, D. S., Miglioranza, G. H. D. O., Steffani, E., Barbosa-Coutinho, E., & Schwaab, M. (2022) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-18479-y · Cited by 17
Vacuum swing adsorption process for post-combustion carbon capture with 3D printed sorbents: Quantifying the improvement in productivity and specific energy over a packed bed system through process simulation and optimization
Krishnamurthy, S. (2022) · Chemical Engineering Science · doi:10.1016/j.ces.2022.117585 · Cited by 17
Nonuniform channels in adsorbent monoliths
Crittenden, B. D., Camus, O., Perera, S. P., Mays, T. J., Liarte, F. S., Tennison, S. R., & Crezee, E. (2010) · AIChE Journal · doi:10.1002/aic.12335 · Cited by 16
Self-citation
Direct solar regenerated desiccant dehumidification system for sustainable ventilation in hot and humid climate
Sleiman, S., Harrouz, J. P., Ghali, K., & Ghaddar, N. (2023) · Energy Conversion and Management · doi:10.1016/j.enconman.2023.118039 · Cited by 15
Adsorption of phenol in flow systems by a monolithic carbon cryogel with a microhoneycomb structure
Yoshida, S., Iwamura, S., Ogino, I., & Mukai, S. R. (2016) · Adsorption · doi:10.1007/s10450-016-9799-4 · Cited by 14
Superstructure optimisation of direct air capture integrated with synthetic natural gas production
Dolat, M., Keynejad, K., Duyar, M. S., & Short, M. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.125413 · Cited by 13
Extruded monoliths for gas separation processes: Height equivalent to a theoretical plate and pressure drop correlations
Mennitto, R., Sharma, I., & Brandani, S. (2022) · AIChE Journal · doi:10.1002/aic.17650 · Cited by 13
Activated carbon monolith Co 3 O 4 based catalyst: Synthesis, characterization and adsorption studies
Silas, K., Ghani, W. A. W. A. K., Choong, T. S. Y., & Rashid, U. (2018) · Environmental Technology & Innovation · doi:10.1016/j.eti.2018.10.008 · Cited by 13
Threshold length for maximal reaction rate in catalytic microchannels
Mathieu-Potvin, F., & Gosselin, L. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.01.100 · Cited by 12
A new experimental method to separate interfacial and internal mass transfer on coated adsorbent
Seol, S.-H., Nagano, K., & Togawa, J. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113869 · Cited by 12
Modular monolith adsorbent systems for CO2 capture and its parameterized optimization
Jeong, D. H., & Realff, M. J. (2021) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2021.09.018 · Cited by 11
Global approximations of unsteady‐state adsorption, diffusion, and reaction in a porous catalyst
Lee, J., & Kim, D. H. (2013) · AIChE Journal · doi:10.1002/aic.14014 · Cited by 11
High-order approximations for unsteady-state diffusion and reaction in slab, cylinder and sphere catalyst
Kim, D. H., & Lee, J. (2011) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-011-0120-7 · Cited by 11
Simulation and Optimization of a Rotary Temperature Swing Adsorption (RTSA) Process for CO2 Capture
Krishnamurthy, S., Cloete, S. W. P., & Pugnet, V. (2025) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.4c04957 · Cited by 9
Assessment of SOC adsorption prediction in activated carbon filtration based on Freundlich coefficients calculated from compound properties
Slavik, I., Uhl, W., Börnick, H., & Worch, E. (2016) · RSC Advances · doi:10.1039/c5ra21005d · Cited by 9
Design and Development of Integrated Direct Air Capture and Methanation Processes
Sabatino, F., Galanti, M., Roghair, I., & Annaland, M. V. S. (2024) · Chemie Ingenieur Technik · doi:10.1002/cite.202400076 · Cited by 7
Low Order Hybrid Model for Control Design of an Adsorption Facade System for Solar Cooling
Heidingsfeld, J. L., Böckmann, O., Schäfer, M., Böhm, M. C., & Sawodny, O. (2022) · IEEE Conference on Control Technology and Applications (CCTA) · doi:10.1109/ccta49430.2022.9965991 · Cited by 7
Low burden, adsorbent and heat absorbing structures for respiratory protection in building fires
Barnard, J. E., Scott, S., Tennison, S., Smith, M. W., Burrows, A. D., Perera, S. P., & Chew, Y. M. J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127834 · Cited by 7
Self-citation
Pilot-scale demonstration of a laminate-based CALF-20 rapid cycle pressure-vacuum swing adsorption process for carbon capture
Wilkins, N. S., McKinnon, D. M., Baliga, C., Nguyen, T. T. T., Moroy, B., Xu, I., Lin, X., Tulpar, O., Wheeler, N. D., Tran, V., et al. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.174238 · Cited by 6
Adsorption model for biogas purification: A design tool for solid oxide fuel cells applications
Rozzi, E., Gandiglio, M., Lanzini, A., & Santarelli, M. (2025) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2025.145382 · Cited by 6
Techno-Economic Analysis of Hybrid Adsorption–Membrane Separation Processes for Direct Air Capture
de Joannis, P., Castel, C., Kanniche, M., Favre, É., & Authier, O. (2025) · ChemEngineering · doi:10.3390/chemengineering9050102 · Cited by 6
Comparison of Designs of Hydrogen Isotope Separation Columns by Numerical Modeling
Robinson, D., & Salloum, M. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c03209 · Cited by 6
Novel adsorbent hollow fibres for oxygen concentration
Nevell, J. M., & Perera, S. P. (2011) · Adsorption · doi:10.1007/s10450-011-9323-9 · Cited by 6
Self-citation
Techno-economic analysis of packed bed and structured adsorbent for direct air capture
de Joannis, P., Castel, C., Kanniche, M., Favre, É., & Authier, O. (2025) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2025.100518 · Cited by 5
Adsorption kinetics of methane on a template‐synthesized carbon powder and its pellet
Guan, C., Yang, C., & Wang, K. (2010) · Asia-Pacific Journal of Chemical Engineering · doi:10.1002/apj.428 · Cited by 5
Design and optimisation of a multifunctional monolithic filter for fire escape masks
Barnard, J. E., Scott, S., Tennison, S., Smith, M. W., Harral, M. W., Burrows, A. D., Perera, S. P., & Chew, Y. M. J. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132775 · Cited by 5
Self-citation
Non-Isothermal Kinetic Model of Water Vapor Adsorption on a Desiccant Bed for Harvesting Water from Atmospheric Air
Peeters, R., Verbruggen, V., Rongé, J., & Martens, J. A. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c01733 · Cited by 5
3D modeling of isothermal adsorption in structured contactors
Morgado, N. A., & Mazzotti, M. (2025) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2025.109404 · Cited by 4
Evaporator Temperature Control of a Solar-Powered Adsorption Façade System
Gschweng, M., Heidingsfeld, J. L., Böckmann, O., Schäfer, M., Böhm, M. C., & Sawodny, O. (2024) · IEEE Conference on Control Technology and Applications (CCTA) · doi:10.1109/ccta60707.2024.10666605 · Cited by 4
Lightweight modeling approach for coupled heat and mass transfer during adsorption processes
Sadykov, I. I., Piccoli, E., Torreggiani, R., Civioc, R., Marechal, F. M. A., & Galmarini, S. (2025) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2025.127608 · Cited by 4
Multi-scale mathematical model of mass transference phenomena inside monolithic carbon aerogels
Camargo, D., Chejne, F., & Alean, J. D. (2019) · Heat and Mass Transfer · doi:10.1007/s00231-019-02654-6 · Cited by 4
Monolith Metal-Oxide-Supported Catalysts: Sorbent for Environmental Application
Silas, K., Ghani, W. A. W. A. K., Choong, T. S. Y., & Rashid, U. (2020) · Catalysts · doi:10.3390/catal10091018 · Cited by 4
Applications of high-order approximate models for unsteady-state diffusion and reaction in a catalyst
Cho, W., & Lee, J. (2013) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-012-0188-8 · Cited by 4
Experimental study and CFD simulation of VOC adsorption on 3D-printed zeolite honeycombs
Pour, S. E., Mamaghani, A. H., Hashisho, Z., Arellano, H., & Anderson, J. E. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.163719 · Cited by 3
Impact of the pore structure on non-wetting phase distribution and gas phase mass transport within cathode-side catalyst layers of PEM fuel cells
Rigby, S. P., Baron, K., Smith, L., Spanakos, D., Sharman, J. D. B., Softley, E., & Fletcher, R. S. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.237430 · Cited by 3
Synthesis, Characterization, and Process Evaluation of an Amine-Grafted Monolith for Temperature Vacuum Swing Adsorption-Based Direct Air Capture
Ravuru, S. S., Nistala, S. H., Sawada, J. A., & Rajendran, A. (2026) · Energy & Fuels · doi:10.1021/acs.energyfuels.5c06634 · Cited by 3
Analisi tecnico-economica del processo di upgrading del biogas mediante Pressure Swing Adsorption
Annesini, M. C., Murmura, M. A., Turchetti, L., Augelletti, R., & Fabriani, I. (2012) · IRIS Research product catalog (Sapienza University of Rome) · Cited by 3
Structured Zeolite Adsorbents for CO2 Separation
Luciano, R. S. (2012) · Cited by 3
Measurement of Adsorption/Desorption Rate of Water Vapor to a Silica gel Thin Film Coated on a Surface of a Cross-fin Tube Heat Exchanger
Ouchi, T., Hamamoto, Y., & Mori, H. (2019) · Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers · doi:10.11322/tjsrae.19-10dc_oa · Cited by 3
Solar-regenerated desiccant belt for direct indoor humidity pumping through active building façade
Bobo, T. E., Ghali, K., Harrouz, J. P., & Ghaddar, N. (2023) · Energy and Buildings · doi:10.1016/j.enbuild.2023.113643 · Cited by 2
3D modeling and effect of structural parameters on adsorption onto honeycomb zeolite
Pour, S. E., Mamaghani, A. H., Hashisho, Z., Crompton, D., Arellano, H., & Anderson, J. E. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.133868 · Cited by 2
Comparison of structured adsorbents for the adsorptive isolation of food ingredients from large streams
Rodriguez-Illera, M., Boon, M. A., Boom, R. M., & Janssen, A. E. M. (2015) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2015.04.020 · Cited by 2
Estudio de sistemas combinados de combustión catalítica de VOCs
Campesi, M. A. (2012) · El Servicio de Difusión de la Creación Intelectual (National University of La Plata) · doi:10.35537/10915/27082 · Cited by 2
Modélisation multiparamètre du phénomène d'adsorption : détermination du temps de percée des cartouches de masques à gaz
Chauveau, R. (2014) · theses.fr (ABES) · doi:10.70675/be9e7cfcz96dbz473ezb42bz6e6f0f598a9c · Cited by 2
A data-driven model reduction of cyclic adsorption in coated tubes
Baghapour, B. (2025) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2025.127189 · Cited by 1
Research on the multi-timescale optimization scheduling of direct air capture systems driven by renewable energy
Wang, L., Liu, Y., Li, Z., Gu, X. G., & Yu, L. (2025) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2025.100530 · Cited by 1
A Scale-Consistent Adsorption Model for Polymer-Based Adsorbents in Direct Air Capture
Bellussi, F. M., Ziemiański, P. P., Sadykov, I. I., Galmarini, S., & Kiefer, F. (2026) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6c01187 · Cited by 1
Novel structured adsorber and oxidation catalysts for the removal of VOCs in low concentration
Nikolajsen, K. M. (2007) · Infoscience (Ecole Polytechnique Fédérale de Lausanne) · doi:10.5075/epfl-thesis-3842 · Cited by 1

Authors: Patton, A., Crittenden, B. D., & Perera, S. P.
Affiliations: University of Bath (GB)
Corresponding author: Crittenden, B.D.
ORCID: Perera, S.P.
Venue: Chemical Engineering Research and Design
Publisher: Elsevier BV
Published: 2004-08
Volume: 82
Issue: 8
Pages: 999-1009
ISSN: 0263-8762 (ISSN-L)
DOI: 10.1205/0263876041580749
OpenAlex: W1998613197
Cited by: 114
References: 50
Citations by year: 2026: 8 · 2025: 12 · 2024: 10 · 2023: 7 · 2022: 6 · 2021: 9 · 2020: 7 · 2019: 4 · 2018: 2 · 2017: 4 · 2016: 4 · 2015: 7 · 2014: 2 · 2013: 5 · 2012: 7
FWCI: 1.86
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Locations: Process Safety and Environmental Protection (publishedVersion)
Topics: Physical Sciences › Engineering › Computational Mechanics › Heat and Mass Transfer in Porous Media
Physical Sciences › Engineering › Control and Systems Engineering › Process Optimization and Integration
Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
Keywords: monolithic adsorbent, linear driving force approximation, hexagonal channels, pressure drop

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.

Use of the Linear Driving Force Approximation to Guide the Design of Monolithic Adsorbents

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks

Data sources