Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 199

The DOI matches its Crossref record.

Selective laser sintering (melting) of stainless and tool steel powders: Experiments and modelling

Childs, T H C, Hauser, C, Badrossamay, M · 2005 · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Abstract

When a laser beam scans once across the surface of a metallic powder bed, the resulting track may be continuous with a crescent or an elliptic cross-section, irregularly broken, balled or only partially melted. This paper reports what laser powers and scan speeds lead to what types of track, for a CO 2 laser beam focused to 0.55 mm and 1.1 mm diameters, scanning over beds made from M2 and H13 tool steel and 314S-HC stainless steel powders. Beds have been made with particle size ranges from 300 μm to 150 μm, from 150 μm to 75 μm, from 75 μm to 38 μm, and less than 38 μm. Measurements are also reported of bed physical properties that are used in a finite element model to predict melt pool dimensions and temperatures. Boundaries between regions of different track formation are explained in terms of melt surface temperature gradients, melt pool length-diameter ratio instabilities, and transitions from partial to complete melting. Implications for building metal parts in powder beds without supports are considered. The modelling is briefly extended to multi-track and multi-layer processing, to conclude that bonding by remelting between layers, while still maintaining control of the melt flow, places severe constraints on the maximum allowable layer thickness.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1243/095440505x8109

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 199

Metadata

Authors
Childs, T. H. C., Hauser, C., & Badrossamay, M.
Venue
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Published
2005-04-01
Volume
219
Issue
4
Pages
339-357
ISSN
  • 0954-4054 (ISSN-L)
  • 2041-2975
OpenAlex
W2094906382
Cited by
199
References
0
FWCI
7.54
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Selective laser sintering (melting) of stainless and tool steel powders: Experiments and modelling. https://app.cochat.ai/papers/10.1243/095440505x8109
The paper
Childs, T. H. C., Hauser, C., & Badrossamay, M. (2005). Selective laser sintering (melting) of stainless and tool steel powders: Experiments and modelling. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. https://doi.org/10.1243/095440505x8109

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.