The DOI matches its Crossref record.
Component repair using laser direct metal deposition
Abstract
Recent studies have indicated that laser direct metal deposition can be used for repairing deep or internal cracks and defects in metallic components. In order to implement the method, it is necessary to machine a groove or slot to the depth of the defect and refill it. This work investigates advantages and potential problems with the technique and compares the results from using two different slot geometries: one rectangular and one triangular in cross-section. H13 hot-work tool steel components are used and H13 powder is deposited using a 1.5 kW diode laser and lateral nozzle. Different combinations of deposition parameters are tested and each sample is analysed in terms of mass deposition rate, deposition microstructure, evidence of porosity, size of the heat-affected zone, and microhardness. Results are evaluated using statistical techniques and the important parameters that control each variable are identified. The work provides evidence that the method can produce high-quality repairs, but porosity at the boundaries between the original part and the added material is a problem.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wilson, J. M., Piya, C., Shin, Y. C., Zhao, F., & Ramani, K. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.05.084 · Cited by 543
Application of Directed Energy Deposition-Based Additive Manufacturing in Repair
Saboori, A., Aversa, A., Marchese, G., Biamino, S., Lombardi, M., & Fino, P. (2019) · Applied Sciences · doi:10.3390/app9163316 · Cited by 537
Kellens, K., Baumers, M., Gutowski, T. G., Flanagan, W., Lifset, R., & Duflou, J. R. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12629 · Cited by 310
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.01.034 · Cited by 300
Metadata
- Authors
- Pinkerton, A. J., Wang, W., & Li, L.
- Venue
- Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Publisher
- SAGE Publications
- Published
- 2008-07-01
- Volume
- 222
- Issue
- 7
- Pages
- 827-836
- ISSN
- 0954-4054 (ISSN-L)
- 2041-2975
- OpenAlex
- W3022250438
- Cited by
- 179
- References
- 0
- FWCI
- 5.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Component repair using laser direct metal deposition. https://app.cochat.ai/papers/10.1243/09544054jem1008
- The paper
- Pinkerton, A. J., Wang, W., & Li, L. (2008). Component repair using laser direct metal deposition. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. https://doi.org/10.1243/09544054jem1008
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.