Characterization of microfeatures in selective laser sintered drug delivery devices
The DOI matches its Crossref record.
Abstract
From initial applications in the fields of prosthesis, implants, surgery planning, anthropology, paleontology and forensics, the scope of rapid prototyping (RP) biomedical applications has expanded to include areas in tissue engineering (TE) and controlled drug delivery. In the current investigation, the feasibility of utilizing selective laser sintering (SLS) to fabricate polymeric drug delivery devices (DDDs) that are difficult to make using conventional production methods was studied. Two features, namely porous microstructure and dense wall formation, inherent in SLS fabricated parts were investigated for their potential roles in drug storage and controlling the release of drugs through the diffusion process. A study to determine the influence of key SLS process parameters on dense wall formation and porous microstructure of SLS fabricated parts was carried out. Composite-type DDDs incorporating dense wall and porous matrix features were designed and fabricated using SLS. The characteristics of the fabricated devices were investigated through micro-structural examination and in vitro release tests carried out using a drug model or dye in a simulated body environment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Laser sintering of polyamides and other polymers
Goodridge, R. D., Tuck, C. J., & Hague, R. J. M. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.04.001 · Cited by 835
Selective laser sintering (SLS) 3D printing of medicines
Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.06.082 · Cited by 577
“For these reasons, the sole use of SLS printing in the medical field has been limited to either tissue engineering scaffolds (Partee et al., 2006) or drug delivery devices where the drug was included after the printing process (Cheah et al., 2002; Leong et al., 2006).”
BackgroundEmergence of 3D Printed Dosage Forms: Opportunities and Challenges
Alhnan, M. A., Okwuosa, T. C., Sadia, M., Wan, K.-W., Ahmed, W., & Arafat, B. (2016) · Pharmaceutical Research · doi:10.1007/s11095-016-1933-1 · Cited by 554
Eshraghi, S., & Das, S. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.002 · Cited by 524
Selective laser sintering in biomedical engineering
Mazzoli, A. (2013) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-012-1001-x · Cited by 469
Metadata
- Authors
- Cheah, C. M., Leong, K. F., Chua, C. K., Low, K. H., & Quek, H. S.
- Venue
- Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
- Publisher
- SAGE Publications
- Published
- 2002-06-01
- Volume
- 216
- Issue
- 6
- Pages
- 369-383
- ISSN
- 0954-4119 (ISSN-L)
- 2041-3033
- OpenAlex
- W1983044289
- Cited by
- 107
- References
- 0
- FWCI
- 1.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Characterization of microfeatures in selective laser sintered drug delivery devices. https://app.cochat.ai/papers/10.1243/095441102321032166
- The paper
- Cheah, C. M., Leong, K. F., Chua, C. K., Low, K. H., & Quek, H. S. (2002). Characterization of microfeatures in selective laser sintered drug delivery devices. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. https://doi.org/10.1243/095441102321032166
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.