The determination of the pressure—viscosity coefficient of a lubricant through an accurate film thickness formula and accurate film thickness measurements
The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Abstract
The pressure—viscosity coefficient is an indispensable property in the elastohydrodynamic (EHD) lubrication of hard contacts, but often not known. A guess will easily lead to enormous errors in the film thickness. This article describes a method to deduct this coefficient by adapting the value of the pressure—viscosity coefficient until the differences between accurate film thickness approxi-mation values and accurate film thickness measurements over a wide range of values are at a minimum. Eleven film thickness approximation formulas are compared in describing the film thickness of a test fluid with known value of the pressure—viscosity coefficient. The measurement method is based on spacer layer interferometry. It is concluded that for circular contacts the newer more versatile expressions are not better than some older approximations, which are limited to a smaller region of conditions, and that the older fits are as least as appropriate to find the pressure—viscosity coefficient of fluids, in spite of the limited data where they have been based on.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“However, the non-dimensional groups proposed by Dowson/Higginson and Blok/Moes are the most widely used ones in EHL literature [4, 11].”
From Predicting EHL film thickness parameters by machine learning approaches (2023) · cites this paper as [11]
In the citing paper
“The R ² values were in a similar range as the fits between proximity equations and experimental film thickness measurements using an optical ball-on-disk tribometer as reported by van Leeuwen [11].”
From Predicting EHL film thickness parameters by machine learning approaches (2023) · cites this paper as [11]
Citations
Cites
Fundamentals of Fluid Film Lubrication
Hamrock, B. J., Schmid, S. R., & Jacobson, B. O. (2004) · CRC Press eBooks · doi:10.1201/9780203021187 · Cited by 2,060
Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III—Fully Flooded Results
Hamrock, B. J., & Dowson, D. (1977) · Journal of Lubrication Technology · doi:10.1115/1.3453074 · Cited by 1,183
Isothermals, isopiestics and isometrics relative to viscosity
Barus, C. (1893) · American Journal of Science · doi:10.2475/ajs.s3-45.266.87 · Cited by 662
Ball Bearing Lubrication (The Elastohydrodynamics of Elliptical Contacts)
Hamrock, B. J., Dowson, D., & Tallian, T. E. (1982) · Journal of Lubrication Technology · doi:10.1115/1.3253193 · Cited by 585
The Measurement and Study of Very Thin Lubricant Films in Concentrated Contacts
Johnston, G. J., Wayte, R., & Spikes, H. A. (1991) · Tribology Transactions · doi:10.1080/10402009108982026 · Cited by 491
Multilevel solution of the EHL line and point contact problems
Venner, C. H. (2022) · doi:10.3990/1.9789090039749 · Cited by 390
Multilevel Methods in Lubrication
(2000) · Tribology Series · doi:10.1016/s0167-8922(00)x8001-7 · Cited by 368
Chittenden, R. J., Dowson, D., Dunn, J. F., & Taylor, C. M. (1985) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1985.0014 · Cited by 230
High Pressure Rheology for Quantitative Elastohydrodynamics
(2019) · Elsevier eBooks · doi:10.1016/c2017-0-03927-7 · Cited by 222
Film thickness in elastohydrodynamically lubricated elliptic contacts
Nijenbanning, G., Venner, C. H., & Moes, H. (1994) · Wear · doi:10.1016/0043-1648(94)90150-3 · Cited by 207
Research works printed but not linked: 20
- Moes H., 2000, Lubrication and beyond
- Dowson D., Higginson G. R. Elastohydrodynamic lubrication (Oxford: Pergamon 1966): 235- and 1977, SI edition, 235 pp.
- Choo J. W., 2003, J. Lubr. Technol., 1253, 533
- Ertel A., von Mohrenstein ‘Die Berechnung der hydrodynamischen Schmierung gekrümmter Oberflächen unter hoher Belastung und Relativbewegung’ 1984, 92 pp. VDI-Fortschrittberichte, Series 1, No. 115, Düsseldorf (authorized German translation of Ertel's Russian Dissertation from 1944, The calculation of the hydrodynamic lubrication with curved surfaces under high load and relative motion ) †
- Barus C., Am. J. Sci., 45, 87
- Roelands C. J. A. Correlational aspects of the viscosity-temperature-pressure relationship of lubricating oils (1966) PhD Thesis.
- Ten Napel W. E., Moes H., Bosma R. ‘Traction in elastohydrodynamic lubrication at low sliding speeds’ In Proceedings of the 1971 Tribology Convention, Douglas, Isle of Man, UK, 12–15 May 1971, pp. 142–150, paper C82/71 (Institution of Mechanical Engineers, London, UK).
- Moes H., Bosma R. ‘Film thickness and traction in E.H.L. at point contact’ In Proceedings of the Elastohydrodynamic Symposium, 1972, pp. 149–152, paper C38/72 (Institution of Mechanical Engineers, London, UK).
- Blok H., 1963, In Proceedings of the International Symposium on Lubrication and wear, 1
- Hamrock B. J. Fundamentals of fluid film lubrication (New York: McGraw-Hill 1994): 690pp.
- Sutcliffe M. P. F., 1989, Proc. IMechE, Part C: J. Mechanical Engineering Science, 203
- Hooke C. J., 1990, Proc. IMechE, Part C: J. Mechanical Engineering Science, 204
- Hooke C. J., 1990, Proc. IMechE, Part C: J. Mechanical Engineering Science, 204
- Blok H. ‘Correlational review of theoretical and experimental data on elasto-hydrodynamic lubrication’ Delft University Report, Laboratory of Machine Elements, 1959, citation from Dowson and Higginson [13] p. 224, Greenwood [26], p. 12, and from Moes [41], p. 215, who dates this reference at 1960.
- Moes H. ‘Discussion on paper R1 by D. Dowson’ Proc. Instn Mech. Engrs 180 Pt. 3B (1965-66): 244–245
- Moes H. A study of the inverse hydrodynamic lubrication theory and of the applications in calculating elastically highly deformed bearings. 1964, 235p. (in Dutch). MSc Thesis, Delft University.
- Blok H. ‘In VDI Berichte, Vol. 20, by W. Peppler, 1957, Die Theorie der hydrodynamischen Schmierung unter besonderer Berücksichtigung physikalischer Erweiterungen’. 1957, pp. 29–30
- Blok H. ‘Communications’ Proc. Instn Mech. Engrs 180 Part 3B (1965-66): 237-238 In Proceedings of the Symposium on Elastohydrodynamic Lubrication, Leeds, September 1965.
- Koets O. J., A survey of the elastohydrodynamic lubrication theory, 217
- Blok H., 1952, J. Instn Petrol, 38344, 673
Cited by
History, Origins and Prediction of Elastohydrodynamic Friction
Spikes, H. A., & Zhang, J. (2014) · Tribology Letters · doi:10.1007/s11249-014-0396-y · Cited by 167
Efficient Solution to the Cavitation Problem in Hydrodynamic Lubrication
Woloszynski, T., Podsiadło, P., & Stachowiak, G. (2015) · Tribology Letters · doi:10.1007/s11249-015-0487-4 · Cited by 140
Cyriac, F., Lugt, P. M., Bosman, R., Padberg, C. J., & Venner, C. H. (2016) · Tribology Letters · doi:10.1007/s11249-015-0633-z · Cited by 103
Predicting EHL film thickness parameters by machine learning approaches
Marian, M., Mursak, J., Bartz, M., Profito, F. J., Rosenkranz, A., & Wartzack, S. (2023) · Friction · doi:10.1007/s40544-022-0641-6 · Cited by 76
Film thickness in a ball-on-disc contact lubricated with greases, bleed oils and base oils
Cousseau, T., Björling, M., Graça, B. M., Campos, A. V., Seabra, J., & Larsson, R. (2012) · Tribology International · doi:10.1016/j.triboint.2012.04.018 · Cited by 74
Metadata
- Authors
- van Leeuwen, H.
- Affiliations
- Shell Global Solutions, PAE Laboratory, Hamburg, Germany,
- Venue
- Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Publisher
- SAGE Publications
- Published
- 2009-04-30
- Volume
- 223
- Issue
- 8
- Pages
- 1143-1163
- ISSN
- 1350-6501 (ISSN-L)
- 2041-305X
- OpenAlex
- W1980131256
- Cited by
- 77
- References
- 35
- Citations by year
- 2026: 1 · 2025: 8 · 2024: 4 · 2023: 3 · 2022: 6 · 2021: 6 · 2020: 4 · 2019: 7 · 2018: 6 · 2017: 1 · 2016: 12 · 2015: 8 · 2014: 4 · 2013: 2 · 2012: 2
- FWCI
- 3.34
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology (publishedVersion)
- TU/e Research Portal (publishedVersion)
- TU/e Research Portal (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Engineering › Mechanical Engineering › Lubricants and Their Additives
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Keywords
- pressure-viscosity coefficient, elastohydrodynamic lubrication, film thickness, lubricant viscosity, circular contacts, tribology
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The determination of the pressure—viscosity coefficient of a lubricant through an accurate film thickness formula and accurate film thickness measurements. https://app.cochat.ai/papers/10.1243/13506501jet504
- The paper
- van Leeuwen, H. (2009). The determination of the pressure—viscosity coefficient of a lubricant through an accurate film thickness formula and accurate film thickness measurements. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. https://doi.org/10.1243/13506501jet504
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.