CoChat

Living Polymerizations of Polar and Nonpolar Monomers by the Catalysis of Organo Rare Earth Metal Complexes

Yasuda, Hajime, Ihara, Eiji · 1997 · Bulletin of the Chemical Society of Japan
Cited by 93

The DOI matches its Crossref record.

Abstract

This review article deals with the rare earth metal initiated polymerization of polar and nonpolar monomers in living fashion (“living” means very active without termination and chain transfer reaction) to give monodisperse high molecular weight polymers at high conversion. A typical example is seen in the polymerization of methyl methacrylate with [SmH(C5Me5)2]2 or [LnMe(C5Me5)2(THF)] (Ln = Sm, Y, and Lu), giving high molecular weight syndiotactic polymers (Mn > 500000, syndiotacticity > 95%) quantitatively at low temperature (−95 °C). The initiation mechanism was discussed on the basis of X-ray analysis of the 1 : 2 adduct (molar ratio) of [SmH(C5Me5)2]2 with MMA. Living polymerizations of alkyl acrylates (methyl acrylate, ethyl acrylate, and butyl acrylate) were also possible by the catalysis of [LnMe(C5Me5)2(THF)] (Ln = Sm, Y); i.e. poly(methyl acrylate) Mn = 48 × 103, Mw/Mn = 1.04, poly(ethyl acrylate) Mn = 55 × 103, Mw/Mn = 1.04, and poly(butyl acrylate) Mn = 70 × 103, Mw/Mn = 1.05. By taking advantages of the living polymerization ability, we attempted ABA triblock copolymerization of MMA/butyl acrylate/MMA to obtain rubber-like elastic polymers. Lanthanum alkoxide(III) has good catalytic activity for the polymerization of alkyl isocyanates (Mn > 106, Mw/Mn = 2.08). Monodisperse polymerizations of lactones, lactide, and various oxiranes were also achieved by polymerization with rare earth metal complexes. C1 symmetric bulky organolanthanide(III) complexes such as {SiMe2[2(3),4-(SiMe)2C5H2]2LnCH(SiMe3)2} (Ln = La, Sm, and Y) show high activity for linear polymerization of ethylene. Organolanthanide(II) complexes such as racemic {SiMe2[2-SiMe3-4-tBu-C5H2]2Sm(THF)} as well as C1 symmetric {SiMe2[2(3),4-(SiMe3)2C5H2]2Sm(THF)} were also found to have high activity for the polymerization of ethylene. Thus, polyethylene of Mn > 106 (Mw/Mn = 1.6) was first obtained by using {SiMe2[2(3),4-(SiMe3)2C5H2]2Sm(THF)}. 1,4-Cis conjugated diene polymerization of 1,3-butadiene and isoprene became available by the efficient catalytic activity of NdCl(C5H5)2/AlR3 or Nd(octanoate)3/AlR3. The Ln(naphthenate)3/AliBu3 system allows selective polymerization of acetylene in cis-fashion. Utilyzing the fact that rare earth metal initiated living polymerization proceeds for both polar and nonpolar monomers, researchers have attempted to block copolymerization of ethylene with MMA or lactones yielding polyethylene derivatives having high chemical reactivity.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1246/bcsj.70.1745

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

Metadata

Authors
Yasuda, H., & Ihara, E.
Venue
Bulletin of the Chemical Society of Japan
Published
1997-08-01
Volume
70
Issue
8
Pages
1745-1767
ISSN
  • 0009-2673 (ISSN-L)
  • 1348-0634
OpenAlex
W2089231545
Cited by
93
References
0
FWCI
6.49
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.