The DOI matches its Crossref record.
Bulk Density of Wet and Dry Wheat Straw and Switchgrass Particles
Abstract
Bulk density is a major physical property in designing the logistic system for biomass handling. The size, shape, moisture content, individual particle density, and surface characteristics are few factors affecting the bulk density. This research investigates the effects of true particle lengths ranging from 6 to 50 mm and moisture contents ranging from 8% to 60% wet basis (wb) on the bulk density of wheat straw and switchgrass. Three types of particle densities of straw and switchgrass measured were: a hollow particle density assuming a hollow cylindrical geometry, a solid particle density assuming a solid cylindrical geometry, and a particle density measured using a gas pycnometer at a gas pressure of 40 kPa. The bulk density of both loose-fill and packed-fill biomass samples was examined. The calculated wet and dry bulk density ranged from 24 to 111 kg m-3 for straw and from 49 to 266 kg m-3 for switchgrass. The corresponding tapped bulk density ranged from 34 to 130 kg m-3 for straw and 68 to 323 kg m-3 for switchgrass. The increase in bulk density due to tapping the container was from 10% for short 6-mm particles to more than 50% for long 50-mm particles. An equation relating the bulk density of stems as a function of moisture content, dry bulk density, and particle size was developed. After the validation of this bulk density equation, the relationship would be highly useful in designing the logistics system for large-scale transport of biomass to a biorefinery. The bulk density and particle density data of uniform particles would be important, if straw and switchgrass is used for pulping and paper making.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Biomass for thermochemical conversion: targets and challenges
Tanger, P., Field, J. L., Jahn, C. E., DeFoort, M. W., & Leach, J. E. (2013) · Frontiers in Plant Science · doi:10.3389/fpls.2013.00218 · Cited by 283
Energy requirement for comminution of biomass in relation to particle physical properties
Miao, Z., Grift, T. E., Hansen, A. C., & Ting, K. C. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.12.016 · Cited by 277
Characterizing variability in lignocellulosic biomass: a review
Yan, J., Oyedeji, O., Leal, J. H., Donohoe, B. S., Semelsberger, T. A., Li, C., Hoover, A. N., Webb, E., Bose, E. A., Zeng, Y., et al. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06263 · Cited by 134
Degradation in soil behavior of artificially aged polyethylene films with pro‐oxidants
Briassoulis, D., Babou, E., Hiskakis, M., & Kyrikou, I. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42289 · Cited by 52
Metadata
- Authors
- Lam, P. S., Sokhansanj, S., Bi, X., Lim, C. J., Naimi, L. J., Hoque, M., Mani, S., Womac, A. R., Narayan, S., & Ye, X. P.
- Venue
- Applied Engineering in Agriculture
- Published
- 2008
- Volume
- 24
- Issue
- 3
- Pages
- 351-358
- ISSN
- 0883-8542 (ISSN-L)
- 1943-7838
- OpenAlex
- W1965253968
- Cited by
- 171
- References
- 0
- FWCI
- 6.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Bulk Density of Wet and Dry Wheat Straw and Switchgrass Particles. https://app.cochat.ai/papers/10.13031/2013.24490
- The paper
- Lam, P. S., Sokhansanj, S., Bi, X., Lim, C. J., Naimi, L. J., Hoque, M., Mani, S., Womac, A. R., Narayan, S., & Ye, X. P. (2008). Bulk Density of Wet and Dry Wheat Straw and Switchgrass Particles. Applied Engineering in Agriculture. https://doi.org/10.13031/2013.24490
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.