The DOI matches its Crossref record.
TILLAGE DEPTH, TILLAGE TIMING, AND COVER CROP EFFECTS ON COTTON YIELD, SOIL STRENGTH, AND TILLAGE ENERGY REQUIREMENTS
Abstract
During the early 1990s, declining cotton (Gossypium hirsutum L.) yields plagued farmers in the TennesseeValley Region of North Alabama who tried to eliminate moldboard and/or chisel plowing from their conventional farmingsystems to meet conservation compliance programs. The severely reduced yields were possibly due to inadequate rootingsystems caused by excessive soil compaction. A study was conducted from 1995-1998 to investigate conservation tillagesystems which incorporated a rye (Secale cereale L.) cover crop to maintain surface cover and in-row tillage to disruptroot-impeding soil layers. Energy requirements for shallow tillage (0.18 m) and deep tillage (0.33 m) performed in theautumn and spring were also assessed. Factors investigated included time of tillage, depth of tillage, and use of a covercrop. A rye cover crop was found to be the largest single factor in increasing seed cotton yield, with positive results seenin three of four years. Of somewhat lesser importance, autumn tillage and shallow tillage increased seed cotton yield inthose years containing more typical growing seasons. The conservation tillage practice of shallow, autumn, in-rowsubsoiling in conjunction with a cover crop may offer the best alternative for farmers trying to reduce the negative effectsof soil compaction, maintain adequate residue cover, and improve seed cotton yield.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The environmental consequences of adopting conservation tillage in Europe: reviewing the evidence
Holland, J. M. (2004) · Agriculture, Ecosystems & Environment · doi:10.1016/j.agee.2003.12.018 · Cited by 1,062
Tillage effects on soil hydraulic properties in space and time: State of the science
STRUDLEY, M., GREEN, T., & ASCOUGHII, J. (2008) · Soil and Tillage Research · doi:10.1016/j.still.2008.01.007 · Cited by 765
Influence of Pecan Biochar on Physical Properties of a Norfolk Loamy Sand
Busscher, W. J., Novak, J. M., Evans, D. E., Watts, D. W., Niandou, M. A. S., & Ahmedna, M. (2010) · Soil Science · doi:10.1097/ss.0b013e3181cb7f46 · Cited by 296
Metadata
- Authors
- Raper, R. L., Reeves, D. W., Burmester, C. H., & Schwab, E. B.
- Venue
- Applied Engineering in Agriculture
- Published
- 2000
- Volume
- 16
- Issue
- 4
- Pages
- 379-385
- ISSN
- 0883-8542 (ISSN-L)
- 1943-7838
- OpenAlex
- W2058053003
- Cited by
- 207
- References
- 0
- FWCI
- 11.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: TILLAGE DEPTH, TILLAGE TIMING, AND COVER CROP EFFECTS ON COTTON YIELD, SOIL STRENGTH, AND TILLAGE ENERGY REQUIREMENTS. https://app.cochat.ai/papers/10.13031/2013.5363
- The paper
- Raper, R. L., Reeves, D. W., Burmester, C. H., & Schwab, E. B. (2000). TILLAGE DEPTH, TILLAGE TIMING, AND COVER CROP EFFECTS ON COTTON YIELD, SOIL STRENGTH, AND TILLAGE ENERGY REQUIREMENTS. Applied Engineering in Agriculture. https://doi.org/10.13031/2013.5363
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.