Thermal-maturity limit for primary thermogenic-gas generation from humic coals as determined by hydrous pyrolysis
The DOI matches its Crossref record.
Abstract
Hydrous-pyrolysis experiments at 360°C (680°F) for 72 h were conducted on 53 humic coals representing ranks from lignite through anthracite to determine the upper maturity limit for hydrocarbon-gas generation from their kerogen and associated bitumen (i.e., primary gas generation). These experimental conditions are below those needed for oil cracking to ensure that generated gas was not derived from the decomposition of expelled oil generated from some of the coals (i.e., secondary gas generation). Experimental results showed that generation of hydrocarbon gas ends before a vitrinite reflectance (Ro) of 2.0%. This reflectance is equivalent to Rock-Eval maximum-yield temperature (Tmax) and hydrogen indices (HIs) of 555°C (1031°F) and 35 mg/g total organic carbon (TOC), respectively. At these maturity levels, essentially no soluble bitumen is present in the coals before or after hydrous pyrolysis. The equivalent kerogen atomic H/C ratio is 0.50 at the primary gas-generation limit and indicates that no alkyl moieties are remaining to source hydrocarbon gases. The convergence of atomic H/C ratios of type-II and -I kerogen to this same value at a reflectance of 2.0%Ro indicates that the primary gas-generation limits for humic coal and type-III kerogen also apply to oil-prone kerogen. Although gas generation from source rocks does not exceed vitrinite reflectance values greater than 2.0%Ro, trapped hydrocarbon gases can remain stable at higher reflectance values. Distinguishing trapped gas from generated gas in hydrous-pyrolysis experiments is readily determined by δ2H of the hydrocarbon gases when a H2-depleted water is used in the experiments. Water serves as a source of hydrogen in hydrous pyrolysis and, as a result, the use of H2-depleted water is reflected in the generated gases but not pre-existing trapped gases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Zimnoch, M., Samek, L., Furman, L., Styszko, K., Skiba, A., Gorczyca, Z., Galkowski, M., Rozanski, K., & Konduracka, E. (2020) · Sustainability · doi:10.3390/su12145777 · Cited by 18
Skiba, A., Styszko, K., Tobler, A., Casotto, R., Gorczyca, Z., Furman, P., Samek, L., Wideł, D., Zimnoch, M., Kasper-Giebl, A., et al. (2024) · Scientific Reports · doi:10.1038/s41598-024-57829-x · Cited by 16
“They are in a relatively narrow range, from − 24.5 to − 23.3‰ 55 .”
BackgroundInfluentialZimnoch, M., Morawski, F., Kuc, T., Samek, L., Bartyzel, J., Gorczyca, Z., Skiba, A., & Rozanski, K. (2020) · Nukleonika · doi:10.2478/nuka-2020-0029 · Cited by 12
Metadata
- Authors
- Lewan, M. D., & Kotarba, M. J.
- Venue
- AAPG Bulletin
- Published
- 2014-12
- Volume
- 98
- Issue
- 12
- Pages
- 2581-2610
- ISSN
- 0149-1423 (ISSN-L)
- OpenAlex
- W2161726594
- Cited by
- 57
- References
- 0
- FWCI
- 1.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal-maturity limit for primary thermogenic-gas generation from humic coals as determined by hydrous pyrolysis. https://app.cochat.ai/papers/10.1306/06021413204
- The paper
- Lewan, M. D., & Kotarba, M. J. (2014). Thermal-maturity limit for primary thermogenic-gas generation from humic coals as determined by hydrous pyrolysis. AAPG Bulletin. https://doi.org/10.1306/06021413204
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.