The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Porosity-permeability relationships in interlayered limestone-dolostone reservoirs
Abstract
Abstract Porosity and permeability data from five carbonate platform successions of different settings, ages, and burial depths are examined to identify overall similarities and differences in the reservoir quality of interlayered limestones and dolostones. Each succession consists mainly of limestone and dolostone, with subordinate proportions of intermediate, partly dolomitized compositions. In the three deeply buried platforms, the key features are that limestones have much lower average porosity than associated dolostones, and that limestones and dolostones show little difference in average permeability-for-given-porosity. In contrast, the shallowly buried platforms show little difference in average porosity between limestones and dolostones and also display higher average permeability-for-given-porosity in dolostones than limestones. These data suggest the following general guidelines for depositional and diagenetic controls on reservoir architecture in carbonates consisting of interlayered limestone and dolostone. (1) Reservoir compartmentalization by the formation of tight limestone barriers is largely a burial diagenetic process involving calcite cementation locally produced by chemical compaction. (2) Both the pattern of early dolomitization and the distribution of clay minerals (because they influence the localization of chemical compaction) are key factors that determine the distribution of tight limestone barriers separating flow units. Thus, the pattern of eventual burial compartmentalization follows a template that is hardwired into the stratigraphic architecture by depositional mineralogy and early diagenesis. (3) After burial (2–3 km; 1.2–1.8 mi), dolostones should not be expected to have higher permeability-for-given- porosity than associated limestones. These rules assume dolomitization to occur early relative to chemical compaction, which will commonly be the case because of combined hydrologic and mass-balance constraints. Dolomitization and concentration of clay appear linked to cycle and sequence architecture in the present examples and thus may have a useful degree of predictability, at least in terms of statistical parameters, such as net/gross and probability of flow-unit thickness distribution.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dolomite: occurrence, evolution and economically important associations
Warren, J. (2000) · Earth-Science Reviews · doi:10.1016/s0012-8252(00)00022-2 · Cited by 1,435
Pressure solution and the force of crystallization: a phenomenological theory
Weyl, P. K. (1959) · Journal of Geophysical Research · doi:10.1029/jz064i011p02001 · Cited by 593
Cited by
Carbonate rocks and petroleum reservoirs: a geological perspective from the industry
Burchette, T. P. (2012) · Geological Society, London, Special Publications · doi:10.1144/sp370.14 · Cited by 261
Metadata
- Authors
- Ehrenberg, S. N., Eberli, G. P., Keramati, M., & Moallemi, S. A.
- Venue
- AAPG Bulletin
- Published
- 2006-01
- Volume
- 90
- Issue
- 1
- Pages
- 91-114
- ISSN
- 0149-1423 (ISSN-L)
- OpenAlex
- W2108986389
- Cited by
- 204
- References
- 2
- FWCI
- 5.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.