The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Design guidelines for optical resonator biochemical sensors
Open accessAbstract
We propose a design tool for dielectric optical resonator-based biochemical refractometry sensors. Analogous to the widely accepted photodetector figure of merit, the detectivity D*, we introduce a new sensor system figure of merit, the time-normalized sensitivity S*, to permit quantitative, cross-technology-platform comparison between resonator sensors with distinctive device designs and interrogation configurations. The functional dependence of S* on device parameters, such as resonant cavity quality factor (Q), extinction ratio, system noise, and light source spectral bandwidth, is evaluated by using a Lorentzian peak fitting algorithm and Monte Carlo simulations to provide theoretical insights and useful design guidelines for optical resonator sensors. Importantly, we find that S* critically depends on the cavity Q factor, and we develop a method of optimizing sensor resolution and sensitivity to noise as a function of cavity Q factor. Finally, we compare the simulation predictions of sensor wavelength resolution with experimental results obtained in Ge17Sb12S71 resonators, and good agreement is confirmed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ultra-high-Q toroid microcavity on a chip
Armani, D. K., Kippenberg, T. J., Spillane, S. M., & Vahala, K. J. (2003) · Nature · doi:10.1038/nature01371 · Cited by 2,214
Cited by
Bogaerts, W., De Heyn, P., Van Vaerenbergh, T., De Vos, K., Kumar Selvaraja, S., Claes, T., Dumon, P., Bienstman, P., Van Thourhout, D., & Baets, R. (2012) · Laser & Photonics Reviews · doi:10.1002/lpor.201100017 · Cited by 2,643
Towards fabless silicon photonics
Hochberg, M., & Baehr-Jones, T. (2010) · Nature Photonics · doi:10.1038/nphoton.2010.172 · Cited by 402
Silicon Photonic Biosensors Using Label-Free Detection
Luan, E., Shoman, H., Ratner, D. M., Cheung, K. C., & Chrostowski, L. (2018) · Sensors · doi:10.3390/s18103519 · Cited by 379
Optical ring resonators for biochemical and chemical sensing
Sun, Y., & Fan, X. (2011) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-010-4237-z · Cited by 355
Non-Hermitian ring laser gyroscopes with enhanced Sagnac sensitivity
Hokmabadi, M. P., Schumer, A., Christodoulides, D. N., & Khajavikhan, M. (2019) · Nature · doi:10.1038/s41586-019-1780-4 · Cited by 320
Claes, T., Bogaerts, W., & Bienstman, P. (2010) · Optics Express · doi:10.1364/oe.18.022747 · Cited by 299
Metadata
- Authors
- Hu, J., Sun, X., Agarwal, A., & Kimerling, L. C.
- Venue
- Journal of the Optical Society of America B
- Publisher
- Optica Publishing Group
- Published
- 2009-04-16
- Volume
- 26
- Issue
- 5
- Pages
- 1032
- ISSN
- 0740-3224 (ISSN-L)
- 1520-8540
- OpenAlex
- W2076335042
- Cited by
- 193
- References
- 1
- FWCI
- 9.24
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.