Inverse design of digital nanophotonic devices using the adjoint method
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
A high-efficiency inverse design of “digital” subwavelength nanophotonic devices using the adjoint method is proposed. We design a single-mode 3 dB power divider and a dual-mode demultiplexer to demonstrate the efficiency of the proposed inverse design approach, called the digitized adjoint method, for single- and dual-object optimization, respectively. The optimization comprises three stages: 1) continuous variation for an “analog” pattern; 2) forced permittivity biasing for a “quasi-digital” pattern; and 3) a multilevel digital pattern. Compared with the conventional brute-force method, the proposed method can improve design efficiency by about five times, and the performance optimization can reach approximately the same level. The method takes advantages of adjoint sensitivity analysis and digital subwavelength structure and creates a new way for the efficient and high-performance design of compact digital subwavelength nanophotonic devices, which could overcome the efficiency bottleneck of the brute-force method, which is restricted by the number of pixels of a digital pattern, and improve the device performance by extending a conventional binary pattern to a multilevel one.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Inverse design and demonstration of a compact and broadband on-chip wavelength demultiplexer
Piggott, A. Y., Lu, J., Lagoudakis, K. G., Petykiewicz, J., Babinec, T. M., & Vučković, J. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.69 · Cited by 1,113
Topology optimization for nano‐photonics
Jensen, J. S., & Sigmund, O. (2011) · Laser & Photonics Reviews · doi:10.1002/lpor.201000014 · Cited by 767
An integrated-nanophotonics polarization beamsplitter with 2.4 × 2.4 μm2 footprint
Shen, B., Wang, P., Polson, R., & Menon, R. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.80 · Cited by 757 · cited 2×
“An inverse design approach has recently emerged as a promising way to realize ultracompact and high-performance nanophotonic devices for high-density integration, including nanostructured photonic crystals [1], wavelength demultiplexers [2–4], power dividers [5–9], polarization beam splitters [10], polarization rotato…”
BackgroundMethodAdjoint shape optimization applied to electromagnetic design
Lalau-Keraly, C. M., Bhargava, S., Miller, O. D., & Yablonovitch, E. (2013) · Optics Express · doi:10.1364/oe.21.021693 · Cited by 753
Deep Neural Network Inverse Design of Integrated Photonic Power Splitters
Tahersima, M. H., Kojima, K., Koike-Akino, T., Jha, D., Wang, B., Lin, C., & Parsons, K. (2019) · Scientific Reports · doi:10.1038/s41598-018-37952-2 · Cited by 390
Fabrication-constrained nanophotonic inverse design
Piggott, A. Y., Petykiewicz, J., Su, L., & Vučković, J. (2017) · Scientific Reports · doi:10.1038/s41598-017-01939-2 · Cited by 283
Nanophotonic computational design
Lu, J., & Vučković, J. (2013) · Optics Express · doi:10.1364/oe.21.013351 · Cited by 278
Su, L., Piggott, A. Y., Sapra, N. V., Petykiewicz, J., & Vučković, J. (2018) · ACS Photonics · doi:10.1021/acsphotonics.7b00987 · Cited by 266
Topology optimized mode multiplexing in silicon-on-insulator photonic wire waveguides
Frellsen, L. F., Ding, Y., Sigmund, O., & Frandsen, L. H. (2016) · Optics Express · doi:10.1364/oe.24.016866 · Cited by 244
Ultra-compact mode (de) multiplexer based on subwavelength asymmetric Y-junction
Chang, W., Lu, L., Ren, X., Li, D., Pan, Z., Cheng, M., Liu, D., & Zhang, M. (2018) · Optics Express · doi:10.1364/oe.26.008162 · Cited by 213
Self-citationUltra-broadband on-chip twisted light emitter for optical communications
Xie, Z., Lei, T., Li, F., Qiu, H., Zhang, Z., Wang, H., Min, C., Du, L., Li, Z., & Yuan, X. (2018) · Light: Science & Applications · doi:10.1038/lsa.2018.1 · Cited by 205
Nanophotonic Computational Design
Lu, J. (2013) · Cited by 193
Integrated photonic power divider with arbitrary power ratios
Xu, K., Liu, L., Wen, X., Sun, W., Zhang, N., Yi, N., Sun, S., Xiao, S., & Song, Q. (2017) · Optics Letters · doi:10.1364/ol.42.000855 · Cited by 177
Genetic-algorithm-optimized wideband on-chip polarization rotator with an ultrasmall footprint
Yu, Z., Cui, H., & Sun, X. (2017) · Optics Letters · doi:10.1364/ol.42.003093 · Cited by 146
Analytical level set fabrication constraints for inverse design
Vercruysse, D., Sapra, N. V., Su, L., Trivedi, R., & Vučković, J. (2019) · Scientific Reports · doi:10.1038/s41598-019-45026-0 · Cited by 126
Inverse-Design and Demonstration of Ultracompact Silicon Meta-Structure Mode Exchange Device
Jia, H., Zhou, T., Fu, X., Ding, J., & Yang, L. (2018) · ACS Photonics · doi:10.1021/acsphotonics.8b00013 · Cited by 124
Knowledge Discovery in Nanophotonics Using Geometric Deep Learning
Kiarashinejad, Y., Zandehshahvar, M., Abdollahramezani, S., Hemmatyar, O., Pourabolghasem, R., & Adibi, A. (2019) · Advanced Intelligent Systems · doi:10.1002/aisy.201900132 · Cited by 123
Deep Learning Reveals Underlying Physics of Light–Matter Interactions in Nanophotonic Devices
Kiarashi, Y., Abdollahramezani, S., Zandehshahvar, M., Hemmatyar, O., & Adibi, A. (2019) · Advanced Theory and Simulations · doi:10.1002/adts.201900088 · Cited by 106
Lu, L., Liu, D., Zhou, F., Li, D., Cheng, M., Deng, L., Fu, S., Xia, J., & Zhang, M. (2016) · Optics Letters · doi:10.1364/ol.41.005051 · Cited by 96
Self-citationMachine Learning Regression Approach to the Nanophotonic Waveguide Analyses
Chugh, S., Ghosh, S., Gulistan, A., & Rahman, B. M. A. (2019) · Journal of Lightwave Technology · doi:10.1109/jlt.2019.2946572 · Cited by 93
Designing integrated photonic devices using artificial neural networks
Hammond, A. M., & Camacho, R. M. (2019) · Optics Express · doi:10.1364/oe.27.029620 · Cited by 80
Christiansen, R. E., Vester-Petersen, J., Madsen, S., & Sigmund, O. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.08.034 · Cited by 69
Deng, Y., & Korvink, J. G. (2016) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2015.0835 · Cited by 63
Cited by
Optical meta-waveguides for integrated photonics and beyond
Meng, Y., Chen, Y., Lu, L., Ding, Y., Cusano, A., Fan, J. A., Hu, Q., Wang, K., Xie, Z., Liu, Z., et al. (2021) · Light: Science & Applications · doi:10.1038/s41377-021-00655-x · Cited by 464
Self-citationA guidance to intelligent metamaterials and metamaterials intelligence
Qian, C., Kaminer, I., & Chen, H. (2025) · Nature Communications · doi:10.1038/s41467-025-56122-3 · Cited by 254
Metadata
- Authors
- Wang, K., Ren, X., Chang, W., Lu, L., Liu, D., & Zhang, M.
- Venue
- Photonics Research
- Publisher
- Optica Publishing Group
- Published
- 2020-03-24
- Volume
- 8
- Issue
- 4
- Pages
- 528
- ISSN
- 2327-9125 (ISSN-L)
- OpenAlex
- W3004833610
- Cited by
- 164
- References
- 23
- FWCI
- 14.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.