The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Discrete Element Method (DEM) for Industrial Applications: Comments on Calibration and Validation for the Modelling of Cylindrical Pellets
Open accessAbstract
As a consequence of increasing computer power and more readily useable commercial and open source codes, Discrete Element Method (DEM) is becoming widely used across a range of applications to simulate increasingly complex processes. This is exacerbating the challenge of setting up simulations for industrial applications. The literature on input parameter selection is divided. A number of papers report methods for their direct measurement. Others, by contrast, propose a “calibration” approach where the particle properties are derived as adjustable parameters by quantitative comparison of experimental and simulation results. This paper reports on the calibration and validation of the input parameters for the specific case of cylindrical tablets represented by conjoined spheres. The initial steps are to not only assign and optimise the DEM input parameters but also optimise the shape representation; what degree of linearity of the edges and angularity of the corners are required to accurately reflect the cylindrical shape. The model was used to simulate two configurations of a rotating drum: an “attrition tester” with a single longitudinal baffle and an un-baffled drum. The results were compared qualitatively and quantitatively with experimental data. While the qualitative comparison was good in most cases, detailed quantitative comparison fared less well, with some significant errors. This study highlights some of the key issues for a wider-spread of industrial applications for DEM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
Particle Image Velocimetry: A Practical Guide
Raffel, M., Willert, C. E., Wereley, S. T., & Kompenhans, J. (2007) · Springer eBooks · doi:10.1007/978-3-540-72308-0 · Cited by 1,634
Cleary, P. W., & Sawley, M. L. (2002) · Applied Mathematical Modelling · doi:10.1016/s0307-904x(01)00050-6 · Cited by 691
Favier, J. F., Abbaspour-Fard, M. H., Kremmer, M., & Raji, A. O. (1999) · Engineering Computations · doi:10.1108/02644409910271894 · Cited by 431
A study on the validity of the multi-sphere Discrete Element Method
Kruggel-Emden, H., Rickelt, S., Wirtz, S., & Scherer, V. (2008) · Powder Technology · doi:10.1016/j.powtec.2008.04.037 · Cited by 362
Numerical simulation of the impact fracture and fragmentation of agglomerates
Thornton, C., Yin, K. K., & Adams, M. J. (1996) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/29/2/021 · Cited by 303
Modeling of heat transfer in granular flow in rotating vessels
Chaudhuri, B., Muzzio, F. J., & Tomassone, M. S. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.05.034 · Cited by 265
Matuttis, H. G., Luding, S., & Herrmann, H. J. (2000) · Powder Technology · doi:10.1016/s0032-5910(99)00243-0 · Cited by 247
Predicting discharge dynamics from a rectangular hopper using the discrete element method (DEM)
Anand, A., Curtis, J. S., Wassgren, C. R., Hancock, B. C., & Ketterhagen, W. R. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2008.08.015 · Cited by 233
Prediction of screw conveyor performance using the Discrete Element Method (DEM)
Owen, P. J., & Cleary, P. W. (2009) · Powder Technology · doi:10.1016/j.powtec.2009.03.012 · Cited by 230
Determination of discrete element model parameters required for soil tillage
ASAF, Z., RUBINSTEIN, D., & SHMULEVICH, I. (2007) · Soil and Tillage Research · doi:10.1016/j.still.2006.03.006 · Cited by 223
Numerical simulation of particle dynamics in different flow regimes in a rotating drum
Yang, R., Yu, A., McElroy, L., et al. (2008) · Powder Technology · doi:10.1016/j.powtec.2008.04.081 · Cited by 221
DEM prediction of industrial and geophysical particle flows
Cleary, P. W. (2010) · Particuology · doi:10.1016/j.partic.2009.05.006 · Cited by 221
Adaptive medial-axis approximation for sphere-tree construction
Bradshaw, G., & O'Sullivan, C. (2004) · ACM Transactions on Graphics · doi:10.1145/966131.966132 · Cited by 193
Large-scale powder mixer simulations using massively parallel GPUarchitectures
Radeke, C. A., Glasser, B. J., & Khinast, J. G. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.09.035 · Cited by 183
A simulation study of the effects of dynamic variables on the packing of spheres
Zhang, Z. P., Liu, L. F., Yuan, Y. D., & Yu, A. B. (2001) · Powder Technology · doi:10.1016/s0032-5910(00)00356-9 · Cited by 169
Kodam, M., Bharadwaj, R., Curtis, J. S., Hancock, B. C., & Wassgren, C. R. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.08.006 · Cited by 151
Lemieux, M., Léonard, G., Doucet, J., Leclaire, L.-A., Viens, F., Chaouki, J., & Bertrand, F. (2006) · Powder Technology · doi:10.1016/j.powtec.2006.12.009 · Cited by 141
Flow of sphero-disc particles in rectangular hoppers—a DEM and experimental comparison in 3D
Li, J., Langston, P. A., Webb, C., & Dyakowski, T. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2004.07.022 · Cited by 128
Moysey, P. A., & Thompson, M. R. (2005) · Powder Technology · doi:10.1016/j.powtec.2005.03.001 · Cited by 119
Analysis of particle motion in a paddle mixer using Discrete Element Method (DEM)
Hassanpour, A., Tan, H., Bayly, A. E., Gopalkrishnan, P. V., Ng, B., & Ghadiri, M. (2010) · Powder Technology · doi:10.1016/j.powtec.2010.07.025 · Cited by 112
High-shear granulation modeling using a discrete element simulation approach
Gantt, J. A., & Gatzke, E. P. (2005) · Powder Technology · doi:10.1016/j.powtec.2005.04.012 · Cited by 80
Simulations of Structures in Packed Columns and Validation by X-ray Tomography
Caulkin, R., Jia, X., Xu, C., Fairweather, M., Williams, R. A., Stitt, E. H., Nijemeisland, M., Aferka, S., Crine, M., Léonard, A., et al. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie800033a · Cited by 67
Self-citationA modeling approach for understanding effects of powder flow properties on tablet weight variability
Mehrotra, A., Chaudhuri, B., Faqih, A. N., Tomassone, M. S., & Muzzio, F. J. (2008) · Powder Technology · doi:10.1016/j.powtec.2008.05.016 · Cited by 58
Variational sphere set approximation for solid objects
Wang, R., Zhou, K., Snyder, J., Liu, X., Bao, H., Peng, Q., & Guo, B. (2006) · The Visual Computer · doi:10.1007/s00371-006-0052-0 · Cited by 55
An investigation into the kinetic (sliding) friction of some tablets and capsules
Hancock, B. C., Mojica, N., St.John-Green, K., Elliott, J. A., & Bharadwaj, R. (2009) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2009.09.038 · Cited by 31
Cited by
Calibration of the discrete element method and the effect of particle shape
Coetzee, C. J. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.04.003 · Cited by 361
Podlozhnyuk, A., Pirker, S., & Kloss, C. (2017) · Computational Particle Mechanics · doi:10.1007/s40571-016-0131-6 · Cited by 297
Review on the structure of random packed‐beds
von Seckendorff, J., & Hinrichsen, O. (2021) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.23959 · Cited by 110
Metadata
- Authors
- Marigo, M., & Stitt, E. H.
- Venue
- KONA Powder and Particle Journal
- Published
- 2015
- Volume
- 32
- Issue
- 0
- Pages
- 236-252
- ISSN
- 0288-4534 (ISSN-L)
- 2187-5537
- OpenAlex
- W2085064566
- Cited by
- 270
- References
- 26
- FWCI
- 12.49
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.