The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Building Boundary Tracing and Regularization from Airborne Lidar Point Clouds
Open accessAbstract
Building boundary is necessary for the real estate industry, flood management, and homeland security applications. The extraction of building boundary is also a crucial and difficult step towards generating city models. This study presents an approach to the tracing and regularization of building boundary from raw lidar point clouds. The process consists of a sequence of four steps: separate building and non-building lidar points; segment lidar points that belong to the same building; trace building boundary points; and regularize the boundary. For separation, a slope based 1D bi-directional filter is used. The segmentation step is a region-growing approach. By modifying a convex hull formation algorithm, the building boundary points are traced and connected to form an approximate boundary. In the final step, all boundary points are included in a hierarchical least squares solution with perpendicularity constraints to determine a regularized rectilinear boundary. Our tests conclude that the uncertainty of regularized building boundary tends to be linearly proportional to the lidar point spacing. It is shown that the regularization precision is at 18 percent to 21 percent of the lidar point spacing, and the maximum offset of the determined building boundary from the original lidar points is about the same as the lidar point spacing. Limitation of lidar data resolution and errors in previous filtering processes may cause artefacts in the final regularized building boundary. This paper presents the mathematical and algorithmic formulations along with stepwise illustrations. Results from Baltimore city, Toronto city, and Purdue University campus are evaluated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
On the shape of a set of points in the plane
Edelsbrunner, H., Kirkpatrick, D., & Seidel, R. (1983) · IEEE Transactions on Information Theory · doi:10.1109/tit.1983.1056714 · Cited by 1,634
Computational Geometry: Algorithms and Applications
de Berg, M., van Kreveld, M., Overmars, M., & Schwarzkopf, O. C. (2000) · Springer eBooks · doi:10.1007/978-3-662-04245-8 · Cited by 1,473
Airborne laser scanning—an introduction and overview
Wehr, A., & Lohr, U. (1999) · ISPRS Journal of Photogrammetry and Remote Sensing · doi:10.1016/s0924-2716(99)00011-8 · Cited by 1,414
Determination of terrain models in wooded areas with airborne laser scanner data
Kraus, K., & Pfeifer, N. (1998) · ISPRS Journal of Photogrammetry and Remote Sensing · doi:10.1016/s0924-2716(98)00009-4 · Cited by 1,218
Sithole, G., & Vosselman, G. (2004) · ISPRS Journal of Photogrammetry and Remote Sensing · doi:10.1016/j.isprsjprs.2004.05.004 · Cited by 977
A comparison between photogrammetry and laser scanning
Baltsavias, E. P. (1999) · ISPRS Journal of Photogrammetry and Remote Sensing · doi:10.1016/s0924-2716(99)00014-3 · Cited by 771
Processing of laser scanner data—algorithms and applications
Axelsson, P. (1999) · ISPRS Journal of Photogrammetry and Remote Sensing · doi:10.1016/s0924-2716(99)00008-8 · Cited by 755
SLOPE BASED FILTERING OF LASER ALTIMETRY DATA
George Vosselman, A. (2000) · Cited by 635
Towards automatic building extraction from high-resolution digital elevation models
Weidner, U., & Förstner, W. (1995) · ISPRS Journal of Photogrammetry and Remote Sensing · doi:10.1016/0924-2716(95)98236-s · Cited by 312
Recognising structure in laser scanning point clouds
Vosselman, G., Gorte, B. G. H., Sithole, G., et al. (2004) · University of Twente Research Information · Cited by 308
Cited by
Multi-source remote sensing data fusion: status and trends
Zhang, J. (2010) · International Journal of Image and Data Fusion · doi:10.1080/19479830903561035 · Cited by 764
Contextual classification of lidar data and building object detection in urban areas
Niemeyer, J., Rottensteiner, F., & Soergel, U. (2014) · ISPRS Journal of Photogrammetry and Remote Sensing · doi:10.1016/j.isprsjprs.2013.11.001 · Cited by 577
An update on automatic 3D building reconstruction
Haala, N., & Kada, M. (2010) · ISPRS Journal of Photogrammetry and Remote Sensing · doi:10.1016/j.isprsjprs.2010.09.006 · Cited by 450
Segmentation and Reconstruction of Polyhedral Building Roofs From Aerial Lidar Point Clouds
Sampath, A., & Shan, J. (2010) · IEEE Transactions on Geoscience and Remote Sensing · doi:10.1109/tgrs.2009.2030180 · Cited by 405
Self-citationAutomatic detection of residential buildings using LIDAR data and multispectral imagery
Awrangjeb, M., Ravanbakhsh, M., & Fraser, C. S. (2010) · ISPRS Journal of Photogrammetry and Remote Sensing · doi:10.1016/j.isprsjprs.2010.06.001 · Cited by 271
Metadata
- Authors
- Sampath, A., & Shan, J.
- Venue
- Photogrammetric Engineering & Remote Sensing
- Published
- 2007-07-01
- Volume
- 73
- Issue
- 7
- Pages
- 805-812
- ISSN
- 0099-1112 (ISSN-L)
- OpenAlex
- W2055569426
- Cited by
- 270
- References
- 11
- FWCI
- 23.40
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Building Boundary Tracing and Regularization from Airborne Lidar Point Clouds. https://app.cochat.ai/papers/10.14358/pers.73.7.805
- The paper
- Sampath, A., & Shan, J. (2007). Building Boundary Tracing and Regularization from Airborne Lidar Point Clouds. Photogrammetric Engineering & Remote Sensing. https://doi.org/10.14358/pers.73.7.805
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.