The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Environment Friendly Composite Materials: Biocomposites and Green Composites
Open accessAbstract
Biocomposites can supplement and eventually replace petroleum-based composite materials in several applications. Several critical issues related to bio-fiber surface treatments is to make it a more suitable matrix for composite application and promising techniques need to be solved to design biocomposite of interest. The main motivation for developing biocomposites has been and still is to create a new generation of fiber reinforced plastics material competitive with glass fiber reinforced ones which are environmentally compatible in terms of products, use and renewal. There is an immense opportunity in developing new biobased products, but the real challenge isto design suitable bio-based products through innovation ideas. Green materials are the wave of the future. Bionanocomposites have very strong future prospects, though the present low level of production, some deficiency intechnology and high cost restrict them from a wide range of applications. Defence Science Journal, Vol. 64, No. 3, May 2014, pp. 244-261, DOI:http://dx.doi.org/10.14429/dsj.64.7323
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Impact and tensile properties of PLA/Cordenka and PLA/flax composites
Bax, B., & Müssig, J. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.01.004 · Cited by 637
Nakagaito, A. N., & Yano, H. (2004) · Applied Physics A: Materials Science & Processing · doi:10.1007/s00339-003-2453-5 · Cited by 608
Graupner, N., Herrmann, A. S., & Müssig, J. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.04.003 · Cited by 608
Nakagaito, A. N., & Yano, H. (2005) · Applied Physics A · doi:10.1007/s00339-003-2225-2 · Cited by 545
Helbert, W., Cavaillé, J. Y., & Dufresne, A. (1996) · Polymer Composites · doi:10.1002/pc.10650 · Cited by 473
New polylactide/layered silicate nanocomposites: Role of organoclays
Maiti, P., Yamada, K., Okamoto, M., Ueda, K., & Okamoto, K. (2002) · Chemistry of Materials · doi:10.1021/cm020391b · Cited by 409
Chitosan/clay nanocomposite film preparation and characterization
Xu, Y., Ren, X., & Hanna, M. A. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.22664 · Cited by 301
Cited by
Natural Fibre Composites and Their Applications: A Review
Peças, P., Carvalho, H., Salman, H., & Leite, M. (2018) · Journal of Composites Science · doi:10.3390/jcs2040066 · Cited by 750
A comprehensive review on chemical properties and applications of biopolymers and their composites
George, A., Sanjay, M. R., Srisuk, R., Parameswaranpillai, J., & Siengchin, S. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.03.120 · Cited by 567
Advances of composite materials in automobile applications – A review
Khan, F., Hossain, N., Mim, J. J., Rahman, S. M., Iqbal, M. J., Billah, M., & Chowdhury, M. A. (2025) · Journal of Engineering Research · doi:10.1016/j.jer.2024.02.017 · Cited by 306
Syduzzaman, M., Al Faruque, M. A., Bilisik, K., & Naebe, M. (2020) · Coatings · doi:10.3390/coatings10100973 · Cited by 282
Tripathi, M., Sharma, M., Bala, S., Connell, J., Newbold, J. R., Rees, R. M., Aminabhavi, T. M., Thakur, V. K., & Gupta, V. K. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.124018 · Cited by 38
Metadata
- Authors
- Mitra, B.
- Venue
- Defence Science Journal
- Published
- 2014-05-20
- Volume
- 64
- Issue
- 3
- Pages
- 244-261
- ISSN
- 0011-748X (ISSN-L)
- 0976-464X
- OpenAlex
- W1966899250
- Cited by
- 205
- References
- 11
- FWCI
- 4.37
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.