Digital Twin of manufacturing systems: a case study on increasing the efficiency of reconfiguration
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
The added value of a Digital Twin for reconfiguring manufacturing systems promises an increase in system availability, a reduction in set-up and conversion times and enables the manufacturing of customer-specific products. To evaluate this claim, this paper selects an architecture of the Digital Twin and realizes it on the basis of an application scenario for a cyber-physical manufacturing system. A case study is used to test the reconfiguration of a manufacturing system by comparing two different methods, one without and one with use of the Digital Twin. In this paper, the process steps of both reconfigurations are described and discussed in detail and a qualitative and quantitative evaluation of the reconfiguration results is presented. Finally, this paper gives an outlook on future research on intelligent automation of manufacturing systems using the Digital Twin.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Haag, S., & Anderl, R. (2018) · Manufacturing Letters · doi:10.1016/j.mfglet.2018.02.006 · Cited by 559 · cited 1×
“[13] defines a Digital Twin according to a survey of various definitions of the Digital Twin as a “digital representation of the features, states, and behaviours of a real asset that is realized through models and data”.”
BackgroundAn architecture of an intelligent digital twin in a cyber-physical production system
Ashtari Talkhestani, B., Jung, T., Lindemann, B., Sahlab, N., Jazdi, N., Schloegl, W., & Weyrich, M. (2019) · at - Automatisierungstechnik · doi:10.1515/auto-2019-0039 · Cited by 300
Self-citationConsistency check to synchronize the Digital Twin of manufacturing automation based on anchor points
Talkhestani, B. A., Jazdi, N., Schloegl, W., & Weyrich, M. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.166 · Cited by 119 · cited 1×
“expensive reconfiguration of existing production systems [1].”
Self-citationArchitectural aspects of digital twins in IIoT systems
Malakuti, S., & Grüner, S. (2018) · Proceedings of the 12th European Conference on Software Architecture: Companion Proceedings · doi:10.1145/3241403.3241417 · Cited by 74
Cited by
Zhao, J., Feng, H., Chen, Q., & Garcia de Soto, B. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104028 · Cited by 192
Warke, V., Kumar, S., Bongale, A., & Kotecha, K. (2021) · Sustainability · doi:10.3390/su131810139 · Cited by 103
Stavropoulos, P., & Mourtzis, D. (2022) · Design and Operation of Production Networks for Mass Personalization in the Era of Cloud Technology · doi:10.1016/b978-0-12-823657-4.00010-5 · Cited by 80
Reinpold, L. M., Wagner, L. P., Gehlhoff, F., Ramonat, M., Kilthau, M., Gill, M. S., Reif, J. T., Henkel, V., Scholz, L., & Fay, A. (2025) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-023-02278-y · Cited by 27
Metadata
- Authors
- Ashtari Talkhestani, B., & Weyrich, M.
- Venue
- at - Automatisierungstechnik
- Publisher
- Walter de Gruyter GmbH
- Published
- 2020-06-01
- Volume
- 68
- Issue
- 6
- Pages
- 435-444
- ISSN
- 0178-2312 (ISSN-L)
- 2196-677X
- OpenAlex
- W3033140640
- Cited by
- 42
- References
- 4
- FWCI
- 4.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Digital Twin of manufacturing systems: a case study on increasing the efficiency of reconfiguration. https://app.cochat.ai/papers/10.1515/auto-2020-0003
- The paper
- Ashtari Talkhestani, B., & Weyrich, M. (2020). Digital Twin of manufacturing systems: a case study on increasing the efficiency of reconfiguration. at - Automatisierungstechnik. https://doi.org/10.1515/auto-2020-0003
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.