CoChat

Optimization of the Ratio of ω-6 Linoleic and ω-3 α-Linolenic Fatty Acids of Hemp Seed Oil with Jackknife and Bootstrap Resampling

Devi, Vibha, Khanam, Shabina · 2020 · Chemical Product and Process Modeling

The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.

Abstract

In the present work, supercritical fluid extraction (SFE) of hemp ( Cannabis sativa ) seed oil at various ranges of SFE parameters is performed. These parameters and respective ranges are temperature (40–80) °C, pressure (200–350) bar, solvent (CO 2 ) flow rate (5–15) g/min, particle size (0.43–1.02) mm and amount of co-solvent (ethanol) (0–10) % of solvent flow rate. Central composite design (CCD) suggests 32 experimental runs to perform through SFE. The obtained oil is analysed through gas chromatography to identify its fatty acids concentrations. The ratio of ω-6 linoleic and ω-3 α-linolenic fatty acids (ω-6/ω-3) is optimized through CCD to obtain the desired amount of 3:1 as this ratio is highly preferred for various health benefits. Ratio of ω-6/ω-3 is obtained in the range from 2.11 to 3.06:1 for all experimental runs. The effect of SFE parameters on this ratio is investigated. Further, cross-validation is peformed on the experimental data obtained for the concentrations of both fatty acids by jackknife and bootstrap resampling to authenticate the obtained data. Small value of standard deviation (~1), less standard error of the mean (SEM) (<0.8) and less variance coefficient (<0.11) confirms the validity of the obtained data. All the estimators’ values such as standard deviation, variance coefficients and SEM are observed in 95 % of confidence intervals.

Overview

Integrity signals

Registry

Crossref · 10.1515/cppm-2019-0028

Cites

18 of 18 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 1

  1. Montgomery DC. Design and analysis of experiments. New York: John Wiley & Sons, 2004:6

Cited by

See all 7

Metadata

Authors
Devi, V., & Khanam, S.
Affiliations
Indian Institute of Technology Roorkee (IN)
Corresponding author
Devi, Vibha
Venue
Chemical Product and Process Modeling
Published
2019-09-24
Volume
15
Issue
1
ISSN
1934-2659 (ISSN-L)
OpenAlex
W2974981508
Cited by
7
References
18
Citations by year
2025: 1 · 2023: 2 · 2022: 2 · 2021: 1 · 2020: 1
FWCI
0.39
Type
journal article
Language
en
Open access
closed
Locations
Chemical Product and Process Modeling (publishedVersion)
Topics
  • Physical Sciences › Chemistry › Organic Chemistry › Edible Oils Quality and Analysis
  • Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Phase Equilibria and Thermodynamics
  • Physical Sciences › Engineering › Mechanical Engineering › Agricultural Engineering and Mechanization
Keywords
hemp oil, Cannabis sativa, supercritical fluid extraction, CO2 extraction, fatty acid composition, n-6/n-3 ratio, linoleic acid, alpha-linolenic acid, extraction parameter optimization, jackknife, bootstrapping, cross-validation, central composite design

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.