The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Dispersion engineering and measurement of whispering gallery mode microresonator for Kerr frequency comb generation
Open accessAbstract
Designing and engineering microresonator dispersion are essential for generating microresonator frequency comb. Microresonator frequency combs (microcombs, Kerr frequency combs) offer the potential for various attractive applications as a new type of coherent light source that is power efficient and compact and has a high repetition rate and a broad bandwidth. They are easily driven with a continuous-wave pump laser with adequate frequency tuning; however, the resonators must have a high quality ( Q ) factor and suitable dispersion. The emergence of cavity enhanced four-wave mixing, which is based on third-order susceptibility in the host material, results in the generation of broadband and coherent optical frequency combs in the frequency domain equivalent to an optical pulse in the time domain. The platforms on which Kerr frequency combs can be observed have been developed, thanks to intensive efforts by many researchers over a few decades. Ultrahigh- Q whispering gallery mode (WGM) microresonators are one of the major platforms since they can be made of a wide range of material including silica glass, fluoride crystals and semiconductors. In this review, we focus on the dispersion engineering of WGM microresonators by designing the geometry of the resonators based on numerical simulation. In addition, we discuss experimental methods for measuring resonator dispersion. Finally, we describe experimental results for Kerr frequency combs where second- and higher-order dispersions influence their optical spectra.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ultra-high-Q toroid microcavity on a chip
Armani, D. K., Kippenberg, T. J., Spillane, S. M., & Vahala, K. J. (2003) · Nature · doi:10.1038/nature01371 · Cited by 2,214 · cited 2×
“A toroidal structure is formed by a (CO2) laser reflow process after silica disk fabrication using photolithography and chemical etching and thus achieves efficient light confinement via the boundary between silica and the surrounding air [74].”
BackgroundMicroresonator soliton dual-comb spectroscopy
Suh, M.-G., Yang, Q.-F., Yang, K. Y., Yi, X., & Vahala, K. J. (2016) · Science · doi:10.1126/science.aah6516 · Cited by 991
An optical-frequency synthesizer using integrated photonics
Spencer, D. T., Drake, T., Briles, T. C., Stone, J., Sinclair, L. C., Fredrick, C., Li, Q., Westly, D., Ilic, B. R., Bluestone, A., et al. (2018) · Nature · doi:10.1038/s41586-018-0065-7 · Cited by 951
On-chip dual-comb source for spectroscopy
Dutt, A., Joshi, C., Ji, X., Cardenas, J., Okawachi, Y., Luke, K., Gaeta, A. L., & Lipson, M. (2018) · Science Advances · doi:10.1126/sciadv.1701858 · Cited by 453
Self-starting bi-chromatic LiNbO 3 soliton microcomb
He, Y., Yang, Q.-F., Ling, J., Luo, R., Liang, H., Li, M., Shen, B., Wang, H., Vahala, K., & Lin, Q. (2019) · Optica · doi:10.1364/optica.6.001138 · Cited by 409
Metadata
- Authors
- Fujii, S., & Tanabe, T.
- Venue
- Nanophotonics
- Publisher
- Walter de Gruyter GmbH
- Published
- 2020-02-12
- Volume
- 9
- Issue
- 5
- Pages
- 1087-1104
- ISSN
- 2192-8606 (ISSN-L)
- 2192-8614
- OpenAlex
- W3005712627
- Cited by
- 174
- References
- 5
- FWCI
- 8.60
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Dispersion engineering and measurement of whispering gallery mode microresonator for Kerr frequency comb generation. https://app.cochat.ai/papers/10.1515/nanoph-2019-0497
- The paper
- Fujii, S., & Tanabe, T. (2020). Dispersion engineering and measurement of whispering gallery mode microresonator for Kerr frequency comb generation. Nanophotonics. https://doi.org/10.1515/nanoph-2019-0497
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.