The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Development of a Criterion Method to Determine Peak Mechanical Power Output in a Countermovement Jump
Abstract
There is a general agreement that the most valid method of measuring peak lower-body mechanical power output (LBPP) in a countermovement jump (CMJ) is by analysis of the corresponding vertical component of the ground reaction force (VGRF)-time history of the jump. However, there is no published standard protocol. The purpose of this study was to establish a standard protocol. The variables necessary to define a valid and reliable CMJ method were: (a) vertical force range, (b) force sampling and integration frequency, (c) method of integration, (d) determination of body weight (BW), and (e) determination of the initiation of the CMJ. Countermovement jumps off a force platform (FP) were performed by 15 male professional rugby players. The 5 variables were then optimized to maximize the reliability and validity of the measure of LBPP. Errors of <1% (p ≤ 0.05) in the measurement of LBPP were obtained using the following specification: (a) 6 times BW (using a 16-bit analog to digital converter), (b) 1,000 Hz, (c) Simpson's rule or the trapezoidal rule, (d) mean VGRF for 1 second of quiet standing immediately before jump signal, and (e) 30 ms before the instant BW ± 5 SD is exceeded after the jump signal. Peak lower-body power output was most sensitive to variables 4 and 5. It was concluded that this study has established a standard protocol for the criterion method of measuring peak power in a CMJ using an FP. As all other estimates and less reliable methods of determining LBPP in a CMJ rely on the FP method for calibration, it is proposed that this protocol be used as the basis of future criterion measures using a FP.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
STATISTICAL METHODS FOR ASSESSING AGREEMENT BETWEEN TWO METHODS OF CLINICAL MEASUREMENT
Martin Bland, J., & Altman, D. (1986) · The Lancet · doi:10.1016/s0140-6736(86)90837-8 · Cited by 47,965
(1965) · The Lancet · doi:10.1016/s0140-6736(65)91037-8 · Cited by 16,856
Certain Topics in Telegraph Transmission Theory
Nyquist, H. (1928) · Transactions of the American Institute of Electrical Engineers · doi:10.1109/t-aiee.1928.5055024 · Cited by 3,089
Reliability of Measures Obtained During Single and Repeated Countermovement Jumps
Cormack, S. J., Newton, R. U., McGuigan, M. R., & Doyle, T. L. A. (2008) · International Journal of Sports Physiology and Performance · doi:10.1123/ijspp.3.2.131 · Cited by 730
STRENGTH AND POWER PREDICTORS OF SPORTS SPEED
CRONIN, J. B., & HANSEN, K. T. (2005) · Journal of Strength and Conditioning Research · doi:10.1519/00124278-200505000-00019 · Cited by 698
Kibele, A. (1998) · Journal of Applied Biomechanics · doi:10.1123/jab.14.1.105 · Cited by 177
Validity and Reliability of Methods for Testing Vertical Jumping Performance
Hatze, H. (1998) · Journal of Applied Biomechanics · doi:10.1123/jab.14.2.127 · Cited by 168
Kawamori, N., Crum, A. J., Blumert, P. A., Kulik, J. R., Childers, J. T., Wood, J. A., Stone, M. H., & Haff, G. G. (2005) · The Journal of Strength and Conditioning Research · doi:10.1519/16044.1 · Cited by 166
Evaluation of Power Prediction Equations: Peak Vertical Jumping Power in Women
Canavan, P. K., & Vescovi, J. D. (2004) · Medicine & Science in Sports & Exercise · doi:10.1249/01.mss.0000139802.96395.ac · Cited by 138
Davies, C. T. M., & RENNIE, R. (1968) · Nature · doi:10.1038/217770a0 · Cited by 98
Cited by
Swinton, P. A., Schoenfeld, B. J., & Murphy, A. (2024) · Sports Medicine · doi:10.1007/s40279-024-02006-3 · Cited by 51
Hermassi, S., Schwesig, R., Aloui, G., Shephard, R. J., & Chelly, M. S. (2019) · Journal of Strength and Conditioning Research · doi:10.1519/jsc.0000000000003068 · Cited by 36
Amin Mohammadian, M., Mozayyany, H., Bagheri Koudakani, S., & Maloney, S. J. (2024) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2024.112338 · Cited by 5
Metadata
- Authors
- Owen, N. J., Watkins, J., Kilduff, L. P., Bevan, H. R., & Bennett, M. A.
- Venue
- Journal of Strength and Conditioning Research
- Published
- 2014-06
- Volume
- 28
- Issue
- 6
- Pages
- 1552-1558
- ISSN
- 1064-8011 (ISSN-L)
- OpenAlex
- W2014286188
- Cited by
- 271
- References
- 14
- FWCI
- 6.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Development of a Criterion Method to Determine Peak Mechanical Power Output in a Countermovement Jump. https://app.cochat.ai/papers/10.1519/jsc.0000000000000311
- The paper
- Owen, N. J., Watkins, J., Kilduff, L. P., Bevan, H. R., & Bennett, M. A. (2014). Development of a Criterion Method to Determine Peak Mechanical Power Output in a Countermovement Jump. Journal of Strength and Conditioning Research. https://doi.org/10.1519/jsc.0000000000000311
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.