The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Factors Affecting the Filter Paper Method for Total and Matric Suction Measurements
Abstract
The filter paper method is used as an indirect means of measuring soil suctions. The advantages of the method include its simplicity, its low cost, and its ability to measure a wide range of suctions. The filter paper method has also been used in the field to measure soil suctions. However, the simplicity of the filter paper method has led to an inadequate understanding of the method and, therefore, improper usage. Recent findings have highlighted the need for more precautions in the use of the filter paper method for suction measurements. This paper presents a literature review of the factors affecting the accuracy of the filter paper method and identifies gaps in the current knowledge of the method. An experimental study was also conducted to clarify some of the factors affecting the response of the two most commonly used filter papers for suction measurements. Whatman No. 42 and Schleicher and Schuell No. 589. Calibration curves of the filter papers show that the water content-suction relationships are different for total and matric suctions. The total suction calibration curve is not very sensitive to applied suctions less than 1000 kPa. The calibration curves obtained for total suction are different from those recommended in ASTM D 5298-94, suggesting that the ASTM D 5298-94 equations should not be used for total suction. Instead of existing bilinear equations, new equations are proposed to describe the total and matric suction calibration curves. All the equations were evaluated using the filter paper method to measure the suction of soil specimens of known matric suctions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated Soils
van Genuchten, M. T. (1980) · Soil Science Society of America Journal · doi:10.2136/sssaj1980.03615995004400050002x · Cited by 27,578
Cited by
Unsaturated Soil Mechanics in Engineering Practice
Fredlund, D. G., Rahardjo, H., & Fredlund, M. D. (2012) · Wiley eBooks · doi:10.1002/9781118280492 · Cited by 1,535
Self-citationLebrija-Trejos, E., Pérez-García, E. A., Meave, J. A., Bongers, F., & Poorter, L. (2010) · Ecology · doi:10.1890/08-1449.1 · Cited by 567
Environmental changes during secondary succession in a tropical dry forest in Mexico
Lebrija-Trejos, E., Pérez-García, E. A., Meave, J. A., Poorter, L., & Bongers, F. (2011) · Journal of Tropical Ecology · doi:10.1017/s0266467411000253 · Cited by 264
Metadata
- Authors
- Leong, E., He, L., & Rahardjo, H.
- Venue
- Geotechnical Testing Journal
- Publisher
- ASTM International
- Published
- 2002-09-01
- Volume
- 25
- Issue
- 3
- Pages
- 322-333
- ISSN
- 0149-6115 (ISSN-L)
- OpenAlex
- W2050769273
- Cited by
- 247
- References
- 1
- FWCI
- 12.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Factors Affecting the Filter Paper Method for Total and Matric Suction Measurements. https://app.cochat.ai/papers/10.1520/gtj11094j
- The paper
- Leong, E., He, L., & Rahardjo, H. (2002). Factors Affecting the Filter Paper Method for Total and Matric Suction Measurements. Geotechnical Testing Journal. https://doi.org/10.1520/gtj11094j
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.