The DOI matches its Crossref record.
Proposed Method for Determining the Residual Mortar Content of Recycled Concrete Aggregates
Abstract
Recycling concrete from demolition of existing structures and using it as recycled concrete aggregates (RCAs) in structural-grade concrete have significant economic and environmental benefits. Currently, only a small portion of the concrete waste is reused in building construction, while most of it is used as either pavement base course or sent to landfills for disposal. The lack of confidence in the material properties of the concrete produced with RCAs is generally the main reason for its under-utilization in structural concrete. It has been demonstrated in the literature that the amount of residual mortar attached to the original (or “virgin”) aggregate particles is one of the factors affecting the material properties of RCAs. Therefore, before using RCAs in new concrete, it is crucial that the residual mortar content (RMC) is determined accurately; however, currently there is no standard procedure to determine this quantity. In this paper, an experimental method is proposed to determine the RMC of RCAs. The method comprises a combination of mechanical and chemical stresses that disintegrate the residual mortar and destroy the bond between the mortar and the natural aggregates. The mechanical stresses are created through subjecting RCA to freeze-and-thaw action, while the chemical degradation is achieved through exposure of the RCA to a sodium sulphate solution. The results of the proposed test procedure are validated by means of comprehensive image analysis. With the proposed approach, the attached residual mortar can be adequately removed, and the residual mortar content can be determined.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Microwave-assisted beneficiation of recycled concrete aggregates
Akbarnezhad, A., Ong, K. C. G., Zhang, M. H., Tam, C. T., & Foo, T. W. J. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.03.038 · Cited by 476
Kim, J. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.127071 · Cited by 367
Di Maria, A., Eyckmans, J., & Van Acker, K. (2018) · Waste Management · doi:10.1016/j.wasman.2018.01.028 · Cited by 340
New Mixture Proportioning Method for Concrete Made with Coarse Recycled Concrete Aggregate
Fathifazl, G., Abbas, A., Razaqpur, A. G., Isgor, O. B., Fournier, B., & Foo, S. (2009) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2009)21:10(601 · Cited by 289
Self-citationDurability of recycled aggregate concrete designed with equivalent mortar volume method
Abbas, A., Fathifazl, G., Isgor, O. B., Razaqpur, A. G., Fournier, B., & Foo, S. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.02.012 · Cited by 278
Self-citation
Metadata
- Authors
- Abbas, A., Fathifazl, G., Burkan Isgor, O., Razaqpur, A. G., Fournier, B., & Foo, S.
- Venue
- Journal of ASTM International
- Publisher
- ASTM International
- Published
- 2008-01-01
- Volume
- 5
- Issue
- 1
- Pages
- 1-12
- ISSN
- 1546-962X (ISSN-L)
- OpenAlex
- W2111607866
- Cited by
- 196
- References
- 0
- FWCI
- 7.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Proposed Method for Determining the Residual Mortar Content of Recycled Concrete Aggregates. https://app.cochat.ai/papers/10.1520/jai101087
- The paper
- Abbas, A., Fathifazl, G., Burkan Isgor, O., Razaqpur, A. G., Fournier, B., & Foo, S. (2008). Proposed Method for Determining the Residual Mortar Content of Recycled Concrete Aggregates. Journal of ASTM International. https://doi.org/10.1520/jai101087
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.