The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Velocity, Depth-of-Cut, and Physical Property Effects on Saw Chain Cutting
Open accessAbstract
A better understanding of saw-chain cutting mechanics is needed for more efficient chainsaw designs.The effects of varying key parameters such as workpiece moisture content, workpiece density, cutting velocity, and depth-of-cut, while established for other types of cutting, are largely unexplored and/or unpublished for saw chains.This study contributes to filling this gap through experimentation and analysis.Experiments were conducted using a custom-built saw-chain testing apparatus to measure relevant forces over a range of workpiece moisture contents, workpiece densities, cutting velocities, and depths-of-cut.Analysis consisted of fitting linear regression models to experimental data, identifying trends, and exploring optimum cutting conditions.Results showed that over the range of values included in the study, workpiece moisture content and density had effects that depended on the depth-of-cut.Cutting velocity had a small effect, and depth-of-cut had a large effect.All trends fit well with linear models; however, depth-of-cut required one linear fit for small-to-mid values and a second fit for mid-to-large values.Maximum efficiency was found to occur at a depth-of-cut equal to the transitional value between fits.These results provide basic relationships that can lead to the more effective and efficient use and design of chainsaws.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Changes in chain speed and depth of cut can affect cutting forces and thus affect energy consumption and efficiency (Otto and Parmigiani 2015).”
From Impact of cutting speed and feed rate for cross cutting with saw chains (2021) · cites this paper as Otto and Parmigiani 2015
The cited source says what the claim attributes to it.
In the citing paper
“The test apparatus in which only the guide bar with the sprocket is mounted (Otto and Parmigiani 2015) is similar to the apparatus used in this study, but it was possible to describe its overall impact on the sawing process because the entire cutting mechanism was used.”
From Impact of cutting speed and feed rate for cross cutting with saw chains (2021) · cites this paper as Otto and Parmigiani 2015
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ryan, T. P. (1996) · Wiley series in probability and statistics · doi:10.1002/9780470382806 · Cited by 1,165
The mechanical properties of wood
(1950) · Journal of the Franklin Institute · doi:10.1016/0016-0032(50)90435-2 · Cited by 347
Koch, P. M. (1964) · Cited by 121
An Analysis of the Wood-Cutting Process
Franz, N. C. (1958) · University of Michigan Press eBooks · doi:10.3998/mpub.9690780 · Cited by 90
Application of fracture mechanics for energetic effects predictions while wood sawing
Orlowski, K. A., Ochrymiuk, T., Atkins, A. G., & Chuchała, D. (2013) · Wood Science and Technology · doi:10.1007/s00226-013-0551-x · Cited by 79
Kivimaa, E. (1950) · Aaltodoc (Aalto University) · Cited by 71
Fundamental analysis of the wood-cutting process
McKenzie, W. M. C. (1961) · Deep Blue (University of Michigan) · Cited by 54
Chuchała, D., Orlowski, K. A., Sandak, A., Sandak, J., Paulíny, D., & Barański, J. (2014) · BioResources · doi:10.15376/biores.9.3.5349-5361 · Cited by 38
Main cutting force models for two species of tropical wood
Cristóvão, L., Broman, O., Grönlund, A., Ekevad, M., & Sitoe, R. (2012) · Wood Material Science and Engineering · doi:10.1080/17480272.2012.662996 · Cited by 35
Wyeth, D. J., Goli, G., & Atkins, A. G. (2008) · Holzforschung · doi:10.1515/hf.2009.017 · Cited by 29
Flagged first, then by citations
Research works printed but not linked: 4
- Gronlund, A. (1988). "Measuring and modelling of cutting forces," Proceedings of the 9th International Wood Machining Seminar, University of California Forest Products Laboratory, Richmond, CA, 342-350.
- McKenzie, W. M. (1955). "The performance of gouge type power saw chains," Australian Timber Journal 21(10), 938-954, 995.
- Naylor, A., Hackney, P., Perera, N., and Clahr, E. (2012). "A predictive model for the cutting force in wood machining developed using mechanical properties," BioResources 7(3), 2883-2894. DOI: 10.15376/biores.7.3.2883-2 · DOI
- Stacke, L. E. (1989). Cutting Action of Saw Chains, Ph.D. Dissertation, Chalmers University of Technology, Gothenburg, Sweden.
Cited by
Sorted by citations
A newly-developed model for predicting cutting power during wood sawing with circular saw blades
Orlowski, K. A., & Ochrymiuk, T. (2017) · Maderas Ciencia y tecnología · doi:10.4067/s0718-221x2017005000013 · Cited by 27
Instantaneous Cutting Force Variability in Chainsaws
Maciak, A., Kubuśka, M., & Moskalik, T. (2018) · Forests · doi:10.3390/f9100660 · Cited by 19
Poje, A., & Mihelič, M. (2020) · Forests · doi:10.3390/f11091017 · Cited by 18
Use of Battery- vs. Petrol-Powered Chainsaws in Forestry: Comparing Performances on Cutting Time
Neri, F., Laschi, A., Marchi, E., Marra, E., Fabiano, F., Frassinelli, N., & Foderi, C. (2022) · Forests · doi:10.3390/f13050683 · Cited by 17
Energy Consumption and Cutting Performance of Battery-Powered Chainsaws
Pandur, Z., Bačić, M., Šušnjar, M., Landekić, M., Šporčić, M., Jambreković, B., & Lepoglavec, K. (2023) · Forests · doi:10.3390/f14071329 · Cited by 8
Metadata
- Authors
- Otto, A., & Parmigiani, J. P.
- Affiliations
- Oregon State University (US)
- Venue
- BioResources
- Publisher
- BioResources
- Published
- 2015-09-09
- Volume
- 10
- Issue
- 4
- ISSN
- 1930-2126 (ISSN-L)
- OpenAlex
- W2162321072
- Cited by
- 16
- References
- 16
- Citations by year
- 2025: 4 · 2024: 2 · 2023: 2 · 2022: 1 · 2021: 1 · 2020: 3 · 2018: 2 · 2017: 1
- FWCI
- 0.98
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- Locations
- BioResources (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Physical Sciences › Engineering › Building and Construction › Wood Treatment and Properties
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Forest Biomass Utilization and Management
- Keywords
- chainsaws, cutting mechanics, depth of cut, cutting speed, cutting force, cutting efficiency, wood cutting
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
