The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Chemical structure and physical properties of diamond-like amorphous carbon films prepared by magnetron sputtering
Open accessAbstract
Thin films of amorphous carbon (a–C) and amorphous hydrogenated carbon (a–C:H) were prepared using magnetron sputtering of a graphite target. The chemical structures of the films were characterized using electron energy loss spectroscopy (EELS) and Raman spectroscopy. The mass density, hardness, residual stress, optical band gap, and electrical resistivity were determined, and their relation to the film's chemical structure are discussed. It was found that the graphitic component increases with increasing sputtering power density. This is accompanied by a decrease in the electrical resistivity, optical band gap, mass density, and hardness. Increasing the hydrogen content in the sputtering gas mixture results in decreasing hardness (14 GPa to 3 GPa) and mass density, and increasing optical band gap and electrical resistivity. The variation in the physical properties and chemical structures of these films can be explained in terms of the changes in the volume of sp2-bonded clusters in the a–C films and changes in the termination of the graphitic clusters and sp3-bonded networks by hydrogen in the a–C:H films.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Nature of the Chemical Bond. V
Pauling, L., & Wheland, G. W. (1934) · The Journal of Chemical Physics · doi:10.1063/1.1749514 · Cited by 251
Cited by
Raman spectroscopic investigations of activated carbon materials
Shimodaira, N., & Masui, A. (2002) · Journal of Applied Physics · doi:10.1063/1.1487434 · Cited by 524
A review of investigations on biocompatibility of diamond-like carbon and carbon nitride films
Cui, F. Z., & Li, D. J. (2000) · Surface and Coatings Technology · doi:10.1016/s0257-8972(00)00809-4 · Cited by 365
Gao, J., Wang, Y., Wu, H., Liu, X., Wang, L., Yu, Q., Li, A., Wang, H., Song, C., Gao, Z., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201907915 · Cited by 359
Metadata
- Authors
- Cho, N.-H., Krishnan, K. M., Veirs, D. K., Rubin, M. D., Hopper, C. B., Bhushan, B., & Bogy, D. B.
- Venue
- Journal of Materials Research
- Published
- 1990-11
- Volume
- 5
- Issue
- 11
- Pages
- 2543-2554
- ISSN
- 0884-1616 (ISSN-L)
- 0884-2914
- 2044-5326
- OpenAlex
- W2166705502
- Cited by
- 198
- References
- 1
- FWCI
- 9.05
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Chemical structure and physical properties of diamond-like amorphous carbon films prepared by magnetron sputtering. https://app.cochat.ai/papers/10.1557/jmr.1990.2543
- The paper
- Cho, N.-H., Krishnan, K. M., Veirs, D. K., Rubin, M. D., Hopper, C. B., Bhushan, B., & Bogy, D. B. (1990). Chemical structure and physical properties of diamond-like amorphous carbon films prepared by magnetron sputtering. Journal of Materials Research. https://doi.org/10.1557/jmr.1990.2543
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.