The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Photooxidative self-cleaning transparent titanium dioxide films on glass
Abstract
In the context of studying the feasibility of photocatalytically self-cleaning windows and windshields, clear, abrasion resistant, photocatalytic films of TiO 2 were formed on soda lime glass and on fused quartz by a sol-gel process. The rate of photooxidation of contaminant deposits was estimated by measuring the rate of decrease in the integrated IR absorbance associated with the C-H stretching vibrations of a thin solution-cast film of stearic acid under 365 nm (2.4 mW/cm 2) or 254 nm (0.8 mW/cm 2) irradiation. Approximately 3 × 10−4 stearic acid molecules were stripped per 365 nm photon in either front- or back-illuminated soda lime glass, and 6 × 10−4 molecules when the films were coated on fused quartz. For thin TiO 2 films on fused quartz, the rate of photooxidation, normalized by the number of photons absorbed per unit area, was independent of the wavelength. In contrast, for films on soda lime glass, the rate of photooxidation, when similarly normalized, was higher for the less penetrating wavelength. The reduced photoactivity on glass at the deeply penetrating wavelength (365 nm), as well as the greater photoefficiency on quartz than on glass, are attributed to diffusion of sodium oxide from the glass into the inner glass-contacting zone of the TiO 2 layer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electronic wave functions in semiconductor clusters: experiment and theory
Brus, L. (1986) · The Journal of Physical Chemistry · doi:10.1021/j100403a003 · Cited by 3,276
Better Ceramics Through Chemistry
Ulrich, D. R. (1988) · Transformation of Organometallics into Common and Exotic Materials: Design and Activation · doi:10.1007/978-94-009-1393-6_19 · Cited by 1,713
Chemical modification of alkoxide precursors
Sanchez, C., Livage, J., Henry, M., & Babonneau, F. (1988) · Journal of Non-Crystalline Solids · doi:10.1016/0022-3093(88)90007-5 · Cited by 797
The role of oxygen in photooxidation of organic molecules on semiconductor particles
Gerischer, H., & Heller, A. (1991) · The Journal of Physical Chemistry · doi:10.1021/j100166a063 · Cited by 642
Self-citationPhotocatalytic properties of titanium dioxide (TiO2)
Wold, A. (1993) · Chemistry of Materials · doi:10.1021/cm00027a008 · Cited by 622
Peral, J., & Ollis, D. F. (1992) · Journal of Catalysis · doi:10.1016/0021-9517(92)90085-v · Cited by 518
Titanium dioxide aerogels for photocatalytic decontamination of aquatic environments
Dagan, G., & Tomkiewicz, M. (1993) · The Journal of Physical Chemistry · doi:10.1021/j100151a001 · Cited by 284
Photocatalytic degradation of phenol in the presence of near-UV illuminated titanium dioxide
Matthews, R. W., & McEvoy, S. R. (1992) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/1010-6030(92)85110-g · Cited by 257
Heterogeneous photocatalytic production of hydrogen and methane from ethanol and water
Sakata, T., & Kawai, T. (1981) · Chemical Physics Letters · doi:10.1016/0009-2614(81)80121-2 · Cited by 245
Bahnemann, D. W. (1993) · Israel Journal of Chemistry · doi:10.1002/ijch.199300017 · Cited by 171
Cited by
The surface science of titanium dioxide
Diebold, U. (2003) · Surface Science Reports · doi:10.1016/s0167-5729(02)00100-0 · Cited by 7,944
TiO2 photocatalysis and related surface phenomena
FUJISHIMA, A., ZHANG, X., & TRYK, D. (2008) · Surface Science Reports · doi:10.1016/j.surfrep.2008.10.001 · Cited by 6,737
Banerjee, I., Pangule, R. C., & Kane, R. S. (2011) · Advanced Materials · doi:10.1002/adma.201001215 · Cited by 2,749
Asahi, R., Morikawa, T., Irie, H., & Ohwaki, T. (2014) · Chemical Reviews · doi:10.1021/cr5000738 · Cited by 1,281
Han, F., Kambala, V. S. R., Srinivasan, M., Rajarathnam, D., & Naidu, R. (2009) · Applied Catalysis A: General · doi:10.1016/j.apcata.2009.02.043 · Cited by 1,059
Metadata
- Authors
- Paz, Y., Luo, Z., Rabenberg, L., & Heller, A.
- Venue
- Journal of Materials Research
- Published
- 1995-11
- Volume
- 10
- Issue
- 11
- Pages
- 2842-2848
- ISSN
- 0884-1616 (ISSN-L)
- 0884-2914
- 2044-5326
- OpenAlex
- W2142611686
- Cited by
- 519
- References
- 10
- FWCI
- 4.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.