The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
The Effect of Electrolyte Composition on the Fabrication of Self-Organized Titanium Oxide Nanotube Arrays by Anodic Oxidation
Abstract
We report on the fabrication of self-organized titanium oxide nanotube arrays of enhanced surface area prepared by anodic oxidation of a pure titanium sheet in electrolyte solutions containing potassium fluoride (KF) or sodium fluoride (NaF). The effects of electrolyte composition and concentration, solution pH, and the anodic potential on the formation of nanotubes and dimensions of the resulting nanotubes are detailed. Although nanotube arrays of length greater than 500 nm are not possible with hydrofluoric acid containing electrolytes [G.K. Mor, O.K. Varghese, M. Paulose,N. Mukherjee, C.A. Grimes, J. Mater. Res. 18, 2588 (2003)], by adjusting the pH of a KF containing electrolyte to 4.5 using additives such as sulfuric acid, sodium hydroxide, sodium hydrogen sulfate, and/or citric acid, we could increase the length of the nanotube-array to approximately 4.4 μm, an order of magnitude increase in length. The as-prepared nanotubes are composed of amorphous titanium oxide. Independent of the electrolyte composition, crystallization of the nanotubes to anatase phase occurred at temperatures ⩾280 °C. Rutile formation occurred at the nanotube-Ti substrate interface at temperatures near 480 °C. It appears geometry constraints imposed by the nanotube walls inhibit anatase to rutile transformation. No disintegration of the nanotube array structure is observed at temperatures as high as 580 °C. The excellent structural and crystal phase stability of these nanotubes make them promising for both low- and high-temperature applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Environmental applications of semiconductor photocatalysis
Hoffmann, M. R., Martin, S. T., Choi, W., & Bahnemann, D. W. (1995) · Chemical Reviews · doi:10.1021/cr00033a004 · Cited by 18,495
Grätzel, M. (2001) · Nature · doi:10.1038/35104607 · Cited by 12,687
Fox, M. A., & Dulay, M. T. (1993) · Chemical Reviews · doi:10.1021/cr00017a016 · Cited by 4,163
Titanium oxide nanotube arrays prepared by anodic oxidation
Gong, D., Grimes, C. A., Varghese, O. K., Hu, W., Singh, R. S., Chen, Z., & Dickey, E. C. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0457 · Cited by 2,041
Self-citationHydrogen sensing using titania nanotubes
Varghese, O. K., Gong, D., Paulose, M., Ong, K. G., & Grimes, C. A. (2003) · Sensors and Actuators B: Chemical · doi:10.1016/s0925-4005(03)00222-3 · Cited by 767
Self-citationPreparation of bioactive titanium metal via anodic oxidation treatment
Yang, B., Uchida, M., Kim, H.-M., Zhang, X., & Kokubo, T. (2004) · Biomaterials · doi:10.1016/s0142-9612(03)00626-4 · Cited by 730
Crystallization and high-temperature structural stability of titanium oxide nanotube arrays
Varghese, O. K., Gong, D., Paulose, M., Grimes, C. A., & Dickey, E. C. (2003) · Journal of Materials Research · doi:10.1557/jmr.2003.0022 · Cited by 691
Self-citationExtreme Changes in the Electrical Resistance of Titania Nanotubes with Hydrogen Exposure
Varghese, O. K., Gong, D., Paulose, M., Ong, K. G., Dickey, E. C., & Grimes, C. A. (2003) · Advanced Materials · doi:10.1002/adma.200304586 · Cited by 675
Self-citationThe electrochemical oxide growth behaviour on titanium in acid and alkaline electrolytes
Sul, Y., Johansson, C. B., Jeong, Y., & Albrektsson, T. O. (2001) · Medical Engineering & Physics · doi:10.1016/s1350-4533(01)00050-9 · Cited by 543
Formation of Titania Nanotubes and Applications for Dye-Sensitized Solar Cells
Adachi, M., Murata, Y., Okada, I., & Yoshikawa, S. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1589763 · Cited by 403
Mor, G. K., Carvalho, M. A., Varghese, O. K., Pishko, M. V., & Grimes, C. A. (2004) · Journal of Materials Research · doi:10.1557/jmr.2004.19.2.628 · Cited by 394
Self-citationZhang, H., & Banfield, J. F. (2000) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2000.0067 · Cited by 350
Jang, H. D., Kim, S.-K., & Kim, S.-J. (2001) · Journal of Nanoparticle Research · doi:10.1023/a:1017948330363 · Cited by 322
Microstructure of TiO 2 and ZnO Films Fabricated by the Sol‐Gel Method
Ohya, Y., Saiki, H., Tanaka, T. T. T., & Takahashi, Y. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb08512.x · Cited by 127
Rodriguez, R., Kim, K., & Ong, J. L. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10490 · Cited by 80
Cited by
Zhu, K., Neale, N. R., Miedaner, A., & Frank, A. J. (2007) · Nano Letters · doi:10.1021/nl062000o · Cited by 2,033
Mor, G. K., Varghese, O. K., Paulose, M., Shankar, K., & Grimes, C. A. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.04.007 · Cited by 1,958
Self-citationMacak, J. M., Tsuchiya, H., Taveira, L., Aldabergerova, S., & Schmuki, P. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200502781 · Cited by 878
Anodic Growth of Highly Ordered TiO2 Nanotube Arrays to 134 μm in Length
Paulose, M., Shankar, K., Yoriya, S., Prakasam, H. E., Varghese, O. K., Mor, G. K., Latempa, T. A., Fitzgerald, A., & Grimes, C. A. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp064020k · Cited by 868
Self-citationRecent Advances in the Use of TiO2 Nanotube and Nanowire Arrays for Oxidative Photoelectrochemistry
Shankar, K., Basham, J. I., Allam, N. K., Varghese, O. K., Mor, G. K., Feng, X., Paulose, M., Seabold, J. A., Choi, K.-S., & Grimes, C. A. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp809385x · Cited by 796
Self-citation
Metadata
- Authors
- Cai, Q., Paulose, M., Varghese, O. K., & Grimes, C. A.
- Venue
- Journal of Materials Research
- Published
- 2005-01
- Volume
- 20
- Issue
- 1
- Pages
- 230-236
- ISSN
- 0884-1616 (ISSN-L)
- 0884-2914
- 2044-5326
- OpenAlex
- W2126098604
- Cited by
- 586
- References
- 15
- FWCI
- 22.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.