The DOI matches its Crossref record.
The Role of Indentation Depth on the Measured Hardness of Materials
Abstract
Ultra micro-indentation tests on Ni and Cu samples showed increasing hardness with decreasing penetration depth over a range from 200 to 2000 nm. The results suggest increased strain hardening with decreased indentation depth. To establish that this is a real material effect, a series of tests were conducted on amorphous materials, for which strain hardening is not expected. The hardness of Metglas® was found to be independent of depth. A simple model of the dislocation densities produced under the indenter tip describes the data well. The model is based on the fact that the high density of dislocations expected under a shallow indentation would cause an increase in measured hardness. At large depths, the density of geometrically necessary dislocations is sufficiently small to have little effect on hardness, and the measured hardness approaches the intrinsic hardness of the material.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Indentation size effects in crystalline materials: A law for strain gradient plasticity
Nix, W. D., & Gao, H. (1998) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(97)00086-0 · Cited by 4,394
Self-citationMechanism-based strain gradient plasticity— I. Theory
Gao, H., Huang, Y., Nix, W. D., & Hutchinson, J. W. (1999) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(98)00103-3 · Cited by 2,261
Self-citationPlasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
Greer, J. R., & De Hosson, J. T. M. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.01.005 · Cited by 1,763
Greer, J. R., Oliver, W. C., & Nix, W. D. (2005) · Acta Materialia · doi:10.1016/j.actamat.2004.12.031 · Cited by 1,501
Self-citationThe mechanics of size-dependent indentation
Begley, M. R., & Hutchinson, J. W. (1998) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(98)00018-0 · Cited by 401
Metadata
- Authors
- Shell De Guzman, M., Neubauer, G., Flinn, P., & Nix, W. D.
- Venue
- MRS Proceedings
- Published
- 1993
- Volume
- 308
- ISSN
- 0272-9172 (ISSN-L)
- 1946-4274
- OpenAlex
- W2074754121
- Cited by
- 249
- References
- 0
- FWCI
- 2.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Role of Indentation Depth on the Measured Hardness of Materials. https://app.cochat.ai/papers/10.1557/proc-308-613
- The paper
- Shell De Guzman, M., Neubauer, G., Flinn, P., & Nix, W. D. (1993). The Role of Indentation Depth on the Measured Hardness of Materials. MRS Proceedings. https://doi.org/10.1557/proc-308-613
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.