Photocatalytic Coatings For Environmental Applications
The DOI matches its Crossref record.
Abstract
A series of nano- and micronparticle-grade anatase and rutile titanium dioxide pigments have been prepared with various densities of surface treatments, particle size and surface area. Their photocatalytic activites have been determined in a series of paint films by FTIR, chalking, color, gloss change and weight loss after artifical weathering. The pigments have also been examined by rapid assessment methodologies using photodielectric microwave spectroscopy, 2-propanol oxidation and hydroxyl analysis. The microwave response under light and dark cycles provides an extended timescale probe of charge-carrier dynamics in the pigments. Pigment particle size, surface area and properties clearly play an important role in dispersion and any polymer-pigment interactions. Photooxidation studies on several types of paint films show a clear demarcation between nanoparticle- and pigmentary-grade titanium dioxide, with the former being more active because of their greater degree of catalytic surface activity. The photosensitivity of titanium dioxide is considered to arise from localized sites on the crystal surface (i.e. acidic OH), and occupation of these sites by surface treatments inhibits photoreduction of the pigment by ultraviolet radiation; hence, the destructive oxidation of the binder is inhibited. Coatings containing 2-5% by weight alumina or alumina and silica are satisfactory for general-purpose paints. If greater resistance to weathering is desired, the pigments are coated more heavily to about 7-10% weight. The coating can consist of a combination of several materials, e.g. alumina, silica, zirconia, aluminum phosphates of other metals. For example, the presence of hydrous alumina particles lowers van der Waals forces between pigments particles by several orders of magnitude, decreasing particle-particle attractions. Hydrous aluminum oxide phases appear to improve dispersibility more effectively than most of the other hydroxides and oxides. Coated nanoparticles are shown to exhibit effective light stabilization in various water- and oil-based paint media in comparison with conventional organic stabilizers. Hindered piperidine stabilizers are shown to provide no additional benefits in this regard, often exhibiting strong antagonism. The use of photocatalytic titania nanoparticles in the development of self-cleaning paints and microbiological surfaces is also demonstrated in this study. In the former case, surface erosion is shown to be controlled by varying the ratio of admixture of durable pigmentary-grade rutile (heavily coated) and a catalytic-grade anatase nanoparticle. For environmental applications in the development of coatings for destroying atmospheric pollutants such as nitrogen oxide gases (NO(X)), stable substrates are developed with photocatalytic nanoparticle-grade anatase. In this study, porosity of the coatings through calcium carbonate doping is shown to be crucial in the control of the effective destruction of atmospheric NO(X) gases. For the development of microbiological substrates for the destruction of harmful bacteria, effective nanoparticle anatase titania is shown to be important, with hydrated high surface area particles giving the greatest activity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Titanium dioxide and zinc oxide nanoparticles in sunscreens: focus on their safety and effectiveness
Smijs, T., & Pavel (2011) · Nanotechnology, Science and Applications · doi:10.2147/nsa.s19419 · Cited by 1,135
Santamouris, M., Synnefa, A., & Karlessi, T. (2011) · Solar Energy · doi:10.1016/j.solener.2010.12.023 · Cited by 970
Long, T. C., Saleh, N., Tilton, R. D., Lowry, G. V., & Veronesi, B. (2006) · Environmental Science & Technology · doi:10.1021/es060589n · Cited by 870
Spasiano, D., Marotta, R., Malato, S., Fernandez-Ibañez, P., & Di Somma, I. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.12.050 · Cited by 723
Nanotechnology Safety Concerns Revisited
Stern, S. T., & McNeil, S. E. (2008) · Toxicological Sciences · doi:10.1093/toxsci/kfm169 · Cited by 560
Metadata
- Authors
- Allen, N. S., Edge, M., Sandoval, G., & Verran, J.
- Venue
- Photochemistry and Photobiology
- Publisher
- Wiley
- Published
- 2004
- Volume
- 81
- Issue
- 2
- Pages
- 279-90
- ISSN
- 0031-8655 (ISSN-L)
- OpenAlex
- W2176388322
- Cited by
- 107
- References
- 0
- FWCI
- 2.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Photocatalytic Coatings For Environmental Applications. https://app.cochat.ai/papers/10.1562/2004-07-01-ra-221
- The paper
- Allen, N. S., Edge, M., Sandoval, G., & Verran, J. (2004). Photocatalytic Coatings For Environmental Applications. Photochemistry and Photobiology. https://doi.org/10.1562/2004-07-01-ra-221
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.