The material point method for unsaturated soils
Open accessThe DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
The paper describes a three-phase single-point material point method formulation of coupled flow (water and air) for hydro-mechanical analysis of geotechnical problems involving unsaturated soils. The governing balance and dynamic momentum equations are discretised and adapted to material point method characteristics: an Eulerian computational mesh and a Lagrangian analysis of material points. General mathematical expressions for the terms of the set of governing equations are given. A suction-dependent elastoplastic Mohr–Coulomb model, expressed in terms of net stress and suction variables is implemented. The instability of a slope subjected to rain infiltration, inspired from a real case, is solved and discussed. The model shows the development of the initial failure surface in a region of deviatoric strain localisation, the evolution of stress and suction states in some characteristic locations, the progressive large strain deformation of the slope and the dynamics of the motion characterised by the history of displacement, velocity and acceleration of the unstable mass.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated Soils
van Genuchten, M. T. (1980) · Soil Science Society of America Journal · doi:10.2136/sssaj1980.03615995004400050002x · Cited by 27,578
The shear strength of unsaturated soils
Fredlund, D. G., Morgenstern, N. R., & Widger, R. A. (1978) · Canadian Geotechnical Journal · doi:10.1139/t78-029 · Cited by 1,693 · cited 1×
“The shear strength of unsaturated soils has been examined by 250 several authors (Fredlund et al., 1978; Escario & Saez, 1986; Delage & Graham, 251 1996).”
BackgroundA particle method for history-dependent materials
Sulsky, D., Chen, Z., & Schreyer, H. L. (1994) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(94)90112-0 · Cited by 1,579 · cited 1×
“28 The Material Point Method (MPM) (Sulsky et al., 1994) was developed to 29 simulate large deformations in history-dependent materials.”
MethodThe Generalized Interpolation Material Point Method
Bardenhagen, S., & Kober, E. M. (2004) · Computer Modeling in Engineering & Sciences · doi:10.3970/cmes.2004.005.477 · Cited by 953 · cited 2×
“334 Bardenhagen & Kober (2004) proposed a particle characteristic function instead of a 335 Dirac delta function; in this way the mass of each material point is distributed in a 336 certain space.”
BackgroundFick, A. (1855) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786445508641925 · Cited by 944 · cited 1×
“…V m vij += (15) 191 The diffusive fluxes (i.e. diffusion of water in the gas and the diffusion of air in 192 the water) can be modelled by means of the Fick’s law (Fick, 1855), written as: 193 c ph c phph c ph ωρ ∇−= Di (16) 194 in which cphD is the dispersion tensor which includes non…”
MethodA critical review of Henry’s law constants for chemicals of environmental interest
Mackay, D., & Shiu, W. Y. (1981) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555654 · Cited by 763
Thermodynamics of soil moisture
Edlefsen, N. E., & Anderson, A. B. C. (1943) · Hilgardia · doi:10.3733/hilg.v15n02p031 · Cited by 571
Soil and Water: Physical Principles and Processes
Hillel, D. (2012) · Cited by 562
Elrick, D. E. (1972) · Soil Science Society of America Journal · doi:10.2136/sssaj1972.03615995003600050003x · Cited by 513
Sadeghirad, A., Brannon, R. M., & Burghardt, J. (2011) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.3110 · Cited by 444 · cited 1×
“…the MPM are the convected particle 341 domain interpolation methods (CPDI1 and CPDI2) which are capable of tracking 342 material point domains more accurately, especially for problems involving massive 343 deformations (Sadeghirad et al., 2011; Sadeghirad et al., 2013; Kamojjala et al., 344 2013).”
Material Point Method for Coupled Hydromechanical Problems
Abe, K., Soga, K., & Bandara, S. (2014) · Journal of Geotechnical and Geoenvironmental Engineering · doi:10.1061/(asce)gt.1943-5606.0001011 · Cited by 221 · cited 1×
“72 The second discretization for 2-phase problems has been presented more recently 73 in Abe et al. (2014), Bandara (2013) and Wieckowski (2013).”
Background
Metadata
- Authors
- Yerro, A., Alonso, E. E., & Pinyol, N. M.
- Venue
- Géotechnique
- Publisher
- Emerald
- Published
- 2015-03
- Volume
- 65
- Issue
- 3
- Pages
- 201-217
- ISSN
- 0016-8505 (ISSN-L)
- 1751-7656
- OpenAlex
- W1992400056
- Cited by
- 219
- References
- 11
- FWCI
- 15.96
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.