Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 362

The DOI matches its Crossref record.

Friction of Rocks and Stability of Rock Slopes

Jaeger, J. C.·1971·Géotechnique

Abstract

Synopsis The similarities and differences between soil and rock mechanics are discussed with particular reference to the stability of slopes. The effects of constraints and of the stiffness of the system applying stress are of greater importance in rock mechanics. The criteria for failure of rocks are mostly empirical and lead to linear or power laws. Similar laws might be expected to hold for friction. While the Coulomb law is in general adequate for soils, it appears that the frictional behaviour of rocks is described better by a non-linear law and if a Coulomb law is used factors of safety are sensitive to the value adopted for the cohesion. The various methods for measuring friction are described and their limitations discussed. The process of wear and the area of contact between sliding surfaces are considered. It appears that in some cases residual values of friction are attained after small amounts of sliding. Gouge is built up during sliding and its behaviour appears to be time-dependent. At present, numerical values for friction and other parameters of jointed systems are uncertain and so simple formulae are still useful. A number of formulae for factors of safety for sliding on one or two plane surfaces are given. For the case of rock with closely spaced joints the use of soil mechanics theory for circular and other surfaces of sliding is reasonable. In this case, values of friction obtained from single joint surfaces or crushed rock are conservative since the interlocking of rock elements may cause a substantial increase in strength. Les similitudes et les différences entre la mécanique des sols et la mécanique des roches sont tuditudiées, avec réference particulière à la stabilité des pentes. Les effets des contraintes et de la rigidité du systéme appliquant les contraintes ont plus d'importance dans la mécanique des roches. Les critères pour la rupture des roches sont pour la plupart empiriques, et suggeèent des lois lintudiaires ou de puissance. On peut supposer des lois similaires pour le frottement. Alors que la loi de Coulomb est gènèralement correcte en ce qui concerne les sols, il semble que le frottement des roches serait plus correctement dtudi;fini par une loi non linéaire, et si l'on applique une loi de Coulomb les facteurs de sécurité sont affectés par la valeur adoptée pour la coh´esion. Les différentes methodes de mesure du frottement sont décrites, et leur champ d'application est étudié. On tient compte également du processus d'usure et de la superficie de contact entre les surfaces en glissement. 11 semble que dans certains cas on obtienne des valeurs résiduelles de frottement aprés des glissements de faible importance. Des cavités se produisent pendant le glissement et leur comportement semble dépendre d'un facteur temps. Actuellement, les valeurs numériques de glissement et les autres paramétres des systémes joints ne sont pas certains, et une formule aussi simple rend encore de grands services. On donne un certain nombre de formules pour les facteurs de sécurité du glissement pour une ou deux surfaces planes. Pour les roches avec des joints rapprochés on peut utiliser la théorie de mécanique des sols pour les surfaces de glissement circulaires et autres. Dans ce cas, les valeurs de frottement obtenues pour les surfaces à joint unique ou les roches écrasées sont plutôt en deçà de la vérité puisque l'enchevêtrement des roches peut résulter en unimportant accroissement de la solidité.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1680/geot.1971.21.2.97

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 362

Metadata

Authors
Jaeger, J. C.
Venue
Géotechnique
Publisher
Emerald
Published
1971-06
Volume
21
Issue
2
Pages
97-134
ISSN
  • 0016-8505 (ISSN-L)
  • 1751-7656
OpenAlex
W2163692101
Cited by
362
References
0
FWCI
6.89
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Friction of Rocks and Stability of Rock Slopes. https://app.cochat.ai/papers/10.1680/geot.1971.21.2.97
The paper
Jaeger, J. C. (1971). Friction of Rocks and Stability of Rock Slopes. Géotechnique. https://doi.org/10.1680/geot.1971.21.2.97

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.