The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Micro- and macro-mechanical behaviour of DEM crushable materials
Abstract
This paper provides a micro-mechanical commentary on the macroscopic behaviour observed in DEM simulations of the compression of individual crushable grains, and of triaxial tests on assemblies of both crushable and uncrushable grains. A fragmentation ratio is defined to describe the bond breakage processes, and the significance of other micro-mechanical parameters such as sliding contacts ratio, average coordination number, deviator fabric, and internal energies per unit volume is discussed. Three different modes of grain damage were observed: asperity breakage, internal shear cracking, and internal tensile cracking leading to fast fracture. Energy balances both for the compression of a single grain, and for triaxial tests on assemblies of grains, showed that the loss of elastic energy due to bond breakage was a negligible fraction of the significantly enhanced dissipation encountered with crushable materials. This extra dissipation was associated with frictional sliding triggered by the creation of new degrees of freedom among the breaking fragments. Different modes of grain breakage were found to be representative of different regions of soil states of stress defined with respect to the virgin compression line. The secondary role of elastic grain deformability, increasing coordination number but reducing dilatancy, has also been demonstrated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
The strength and dilatancy of sands
Bolton, M. D. (1986) · Géotechnique · doi:10.1680/geot.1986.36.1.65 · Cited by 2,730
Self-citationNumerical simulations of deviatoric shear deformation of granular media
Thornton, C. (2000) · Géotechnique · doi:10.1680/geot.2000.50.1.43 · Cited by 1,202
On the micromechanics of crushable aggregates
McDowell, G. R., & Bolton, M. D. (1998) · Géotechnique · doi:10.1680/geot.1998.48.5.667 · Cited by 830
Self-citationDiscrete element simulation of crushable soil
Cheng, Y. P., Nakata, Y., & Bolton, M. D. (2003) · Géotechnique · doi:10.1680/geot.2003.53.7.633 · Cited by 449
Self-citationNakata, Y., Kato, Y., Hyodo, M., Hyde, A. F. L., & Murata, H. (2001) · Soils and Foundations · doi:10.3208/sandf.41.2_39 · Cited by 414
Self-citationMicromechanical features of granular assemblies with planar elliptical particles
Rothenburg, L., & Bathurst, R. J. (1992) · Géotechnique · doi:10.1680/geot.1992.42.1.79 · Cited by 328
Numerical simulation of the impact fracture and fragmentation of agglomerates
Thornton, C., Yin, K. K., & Adams, M. J. (1996) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/29/2/021 · Cited by 303
Fabric tensor in granular materials
Satake, M. (1982) · Pages · Cited by 269
On the Yielding and Plastic Compression of Sand.
MCDOWELL, G. R. (2002) · SOILS AND FOUNDATIONS · doi:10.3208/sandf.42.139 · Cited by 253
Cited by
An investigation of single sand particle fracture using X-ray micro-tomography
Zhao, B., Wang, J., Coop, M. R., Viggiani, G., & JIANG, M. (2015) · Géotechnique · doi:10.1680/geot.4.p.157 · Cited by 360
On the micro mechanics of one-dimensional normal compression
McDOWELL, G. R., & DE BONO, J. P. (2013) · Géotechnique · doi:10.1680/geot.12.p.041 · Cited by 269
Particle-Based Discrete Element Modeling: Geomechanics Perspective
O’Sullivan, C. (2011) · International Journal of Geomechanics · doi:10.1061/(asce)gm.1943-5622.0000024 · Cited by 258
Metadata
- Authors
- Bolton, M. D., Nakata, Y., & Cheng, Y. P.
- Venue
- Géotechnique
- Publisher
- Emerald
- Published
- 2008-08
- Volume
- 58
- Issue
- 6
- Pages
- 471-480
- ISSN
- 0016-8505 (ISSN-L)
- 1751-7656
- OpenAlex
- W2099605028
- Cited by
- 318
- References
- 14
- FWCI
- 25.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Micro- and macro-mechanical behaviour of DEM crushable materials. https://app.cochat.ai/papers/10.1680/geot.2008.58.6.471
- The paper
- Bolton, M. D., Nakata, Y., & Cheng, Y. P. (2008). Micro- and macro-mechanical behaviour of DEM crushable materials. Géotechnique. https://doi.org/10.1680/geot.2008.58.6.471
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.