The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Slope stability analysis and discontinuous slope failure simulation by elasto-plastic smoothed particle hydrodynamics (SPH)
Abstract
Most slope stability analyses have employed limit equilibrium methods (LEMs) or the finite-element method (FEM) as the standard approach. However, slope instability is often accompanied by discontinuous failure of the soil, which cannot be modelled by either LEMs or FEM. To overcome this limitation, this paper presents an extension of the smoothed particle hydrodynamics (SPH) method to evaluate the stability of a slope, and to simulate the post-failure behaviour of soil. For the slope stability analysis, the shear strength reduction technique with a modified failure criterion for distinguishing convergent from non-convergent solutions is applied to estimate the safety factor of a slope, and the critical slip surface is determined from a contour plot of accumulated plastic strain. To take the pore water pressure into account, a new SPH formulation for soil motion is developed. It is suggested that this equation can be applied to further developments of SPH for saturated soil. As an application of the proposed method, several smoothed particle slope stability analyses and corresponding slope failure simulations are presented, and compared with other solutions. The results show good agreements with other methods in terms of the safety factor and the critical slip surface. As compared with such traditional methods, however, an advantage of SPH is that it can simulate large deformation and post-failure of soil, and can thereby treat a wide range of applications in computational geomechanics, especially those that include large deformation and failure of geomaterials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
Cited by
Shadloo, M. S., Oger, G., & Le Touzé, D. (2016) · Computers & Fluids · doi:10.1016/j.compfluid.2016.05.029 · Cited by 437
Meshfree Methods: Progress Made after 20 Years
Chen, J.-S., Hillman, M., & Chi, S.-W. (2017) · Journal of Engineering Mechanics · doi:10.1061/(asce)em.1943-7889.0001176 · Cited by 420
Metadata
- Authors
- BUI, H. H., FUKAGAWA, R., SAKO, K., & WELLS, J. C.
- Venue
- Géotechnique
- Publisher
- Emerald
- Published
- 2011-07
- Volume
- 61
- Issue
- 7
- Pages
- 565-574
- ISSN
- 0016-8505 (ISSN-L)
- 1751-7656
- OpenAlex
- W1967172629
- Cited by
- 222
- References
- 1
- FWCI
- 11.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Slope stability analysis and discontinuous slope failure simulation by elasto-plastic smoothed particle hydrodynamics (SPH). https://app.cochat.ai/papers/10.1680/geot.9.p.046
- The paper
- BUI, H. H., FUKAGAWA, R., SAKO, K., & WELLS, J. C. (2011). Slope stability analysis and discontinuous slope failure simulation by elasto-plastic smoothed particle hydrodynamics (SPH). Géotechnique. https://doi.org/10.1680/geot.9.p.046
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.