The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Geopolymer and Portland cement concretes in simulated fire
Open accessAbstract
High-strength Portland cement concrete has a high risk of spalling in fire. Geopolymer, an environmentally friendly alternative to Portland cement, is purported to possess superior fire-resistant properties. However, the spalling behaviour of geopolymer concrete in fire is unreported. In this paper, geopolymer and Portland cement concretes of strengths from 40 to 100 MPa were exposed to rapid temperature rises, simulating fire exposures. Two simulated fire tests, namely rapid surface temperature rise exposure test and standard curve fire test, were conducted. In both types of test, no spalling was found in geopolymer concretes, whereas the companion Portland cement concrete exhibited spalling. This can be attributed to different pore structures of the two concretes. The sorptivity test found that geopolymer concrete had a significantly higher sorption, therefore more connected pores, than Portland cement concrete when compared at the same strength level. Hence, it is suggested that the water vapour can escape from the geopolymer matrix quicker than in Portland cement concrete, resulting in lower internal pore pressure. The paper concludes that, when compared at the same strength level, the geopolymer concrete possesses higher spalling resistance in a fire than Portland cement concrete due to its increased porosity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of Curing Temperature and Silicate Concentration on Fly-Ash-Based Geopolymerization
Sindhunata, van Deventer, J. S. J., Lukey, G. C., & Xu, H. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051251p · Cited by 390
Cited by
Geopolymer concrete: A review of some recent developments
Singh, B., Ishwarya, G., Gupta, M., & Bhattacharyya, S. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.036 · Cited by 1,484
Fiber-reinforced geopolymer composites: A review
Ranjbar, N., & Zhang, M. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103498 · Cited by 651
Durability of alkali-activated binders: A clear advantage over Portland cement or an unproven issue?
Pacheco-Torgal, F., Abdollahnejad, Z., Camões, A. F., Jamshidi, M., & Ding, Y. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.12.017 · Cited by 480
Effect of fire exposure on cracking, spalling and residual strength of fly ash geopolymer concrete
Sarker, P. K., Kelly, S., & Yao, Z. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.06.059 · Cited by 438
A critical review of geopolymer properties for structural fire-resistance applications
Lahoti, M., Tan, K. H., & Yang, E.-H. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.06.076 · Cited by 431
Metadata
- Authors
- Zhao, R., & Sanjayan, J. G.
- Venue
- Magazine of Concrete Research
- Publisher
- Emerald
- Published
- 2011-03
- Volume
- 63
- Issue
- 3
- Pages
- 163-173
- ISSN
- 0024-9831 (ISSN-L)
- 1751-763X
- OpenAlex
- W1967914975
- Cited by
- 235
- References
- 1
- FWCI
- 19.41
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Geopolymer and Portland cement concretes in simulated fire. https://app.cochat.ai/papers/10.1680/macr.9.00110
- The paper
- Zhao, R., & Sanjayan, J. G. (2011). Geopolymer and Portland cement concretes in simulated fire. Magazine of Concrete Research. https://doi.org/10.1680/macr.9.00110
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.