The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
A Comparison of ESAC and FK Methods of Estimating Phase Velocity Using Arbitrarily Shaped Microtremor Arrays
Abstract
Focusing on a comparison of the accuracy of the extended spatial autocorrelation (ESAC) method and the frequency–wavenumber spectrum (FK) method, we carried out short-period microtremor measurements of arbitrarily shaped array configurations at a site with a well-known velocity structure at shallow depths. Using both techniques, we measured phase velocities for frequencies between 2.5 Hz and 13.5 Hz and compared the results with the theoretical Rayleigh-wave-dispersion characteristics of both the fundamental and the first higher modes calculated from the PS logging data. Next, we tried to estimate the S -wave velocity structure to a depth of 43 m by fitting the theoretically calculated phase velocities to the experimental data, taking into consideration both the higher mode contributions as well as the fundamental mode. The theoretical dispersion characteristics were successfully fitted to the results analyzed by the ESAC method but not by the FK method. The estimated S -wave velocity structure from the ESAC method results was in good agreement with the PS logging profile. We also confirmed, using the model, that the S -wave transfer function due to vertical incidence coincided with that from the PS logging data. As a result of the study, we conclude that the ESAC method gives more accurate results than the FK method in determining the Rayleigh-wave phase velocity from records of short-period microtremors using arbitrarily shaped array configurations. The ESAC method can also provide a better estimate of the S -wave velocity structure and site amplification than the FK method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Algorithm for Least-Squares Estimation of Nonlinear Parameters
Marquardt, D. W. (1963) · Journal of the Society for Industrial and Applied Mathematics · doi:10.1137/0111030 · Cited by 30,728
A Simplex Method for Function Minimization
Nelder, J. A., & Mead, R. (1965) · The Computer Journal · doi:10.1093/comjnl/7.4.308 · Cited by 28,905
High-resolution frequency-wavenumber spectrum analysis
Capon, J. (1969) · Proceedings of the IEEE · doi:10.1109/proc.1969.7278 · Cited by 6,374
Cited by
Earthquake‐Induced Chains of Geologic Hazards: Patterns, Mechanisms, and Impacts
Fan, X., Scaringi, G., Korup, O., West, A. J., van Westen, C. J., Tanyas, H., Hovius, N., Hales, T. C., Jibson, R. W., Allstadt, K. E., et al. (2019) · Reviews of Geophysics · doi:10.1029/2018rg000626 · Cited by 1,021
Application of Surface-Wave Methods for Seismic Site Characterization
Foti, S., Parolai, S., Albarello, D., & Picozzi, M. (2011) · Surveys in Geophysics · doi:10.1007/s10712-011-9134-2 · Cited by 259
Metadata
- Authors
- Ohori, M.
- Venue
- Bulletin of the Seismological Society of America
- Published
- 2002-08-01
- Volume
- 92
- Issue
- 6
- Pages
- 2323-2332
- ISSN
- 0037-1106 (ISSN-L)
- OpenAlex
- W2075990421
- Cited by
- 286
- References
- 3
- FWCI
- 4.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.