CoChat

VS30 Estimates Using Constrained H/V Measurements

Castellaro, S., Mulargia, F. · 2009 · Bulletin of the Seismological Society of America
Cited by 185

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

Most seismic codes adopt the average shear-wave velocity as a key parameter \nin the first 30 m of subsoil (VS30). Estimates of VS30 are therefore required for \nboth large- and small-scale seismic microzonation. We propose a technique to measure \nthe VS30 based on the horizontal to vertical spectral ratio (H/V) of microtremor \nrecorded at a single station. The H/V is fitted with a synthetic curve using the independently \nknown thickness of a superficial layer of the subsoil as a constraint. The \nproposed procedure consists of three steps: (1) identify the depth of a shallow stratigraphic \nhorizon from independent geotechnical data, (2) identify its corresponding \nH/V marker, and (3) use it as a constraint to fit the experimental H/V curve with \nthe theoretical one. The synthetic H/V curve is calculated by assuming a stratified \none-dimensional (1D) soil model and a tremor wave field from distant random sources \nthat are composed of Rayleigh and Love waves. This technique has been validated on \ndifferent geological settings following a triple check procedure: (1) the theoretical \nRayleigh-wave phase velocity dispersion curves calculated for the model derived from \nthe H/V fit were compared to the experimental curves measured with the 2D extended \nspatial autocorrelation (ESAC) method and the 1D refraction microtremor (ReMi) array \nsurveys; (2) the VS profiles and (3) the VS30 estimates obtained by the proposed \ntechnique were compared to those obtained by using the latter array techniques. Finally, \nthe inferred stratigraphy was compared to the geological model. The proposed \ntechnique is not meant to provide accurate VS profiles but has the potential to provide \nVS30 estimates that are coherent with those measured through ESAC and ReMi and to \nsatisfy law requirements. Furthermore, the H/V is found to be capable in detecting \ndeviations from 1D subsoil geometry over the length of a few meters, the correctness \nof which was confirmed by direct drilling.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1785/0120080179

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Metadata

Authors
Castellaro, S., & Mulargia, F.
Venue
Bulletin of the Seismological Society of America
Published
2009-04-01
Volume
99
Issue
2A
Pages
761-773
ISSN
0037-1106 (ISSN-L)
OpenAlex
W2039687839
Cited by
185
References
1
FWCI
5.75
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.