The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
The character of high-frequency strong ground motion
Abstract
Analysis of more than 300 horizontal components of ground acceleration written by the San Fernando earthquake, eight other moderate-to-large California earthquakes, and seven Oroville aftershocks reveal that these acceleration time histories are, to a very good approximation, band-limited white Gaussian noise within the S-wave arrival window; the band limitation is defined by the spectral corner frequency f0 and fmax, the highest frequency passed by the accelerograph or the Earth's attenuation, and the S-wave arrival window is (0 ≦ t − R/β ≦ Td), where R is distance, β is shear-wave velocity, and Td is the faulting duration. An examination of the root-mean-square acceleration (arms) characteristics of these records for 0 ≦ t − R/β ≦ Td in terms of the relation a rms = 0.85 ( 2 π ) 106 2 Δ σ ϕ R f max f o where Δσ is the earthquake stress drop, yields the surprising result that all 16 earthquakes have stress drops, as determined by record values of arms, very nearly equal to 100 bars (within a factor of 2). The source dependence of arms thus depends solely on the parameter 1/fo, which increases only as the one-sixth power of seismic moment for constant stress drop earthquakes. Put another way, model and record arms are in agreement within a factor of 2 approximately 85 per cent of the time for Δσ = 100 bars and knowledge of 1/fo. On the basis that acceleration time histories are finite-duration, band-limited, white Gaussian noise, for any of which arms is fixed by Δσ = 100 bars and 1/fo, we can estimate the peak accelerations (amax) for all of these records with considerable accuracy (50 per cent or less). The relation is a max = a rms 2 In ( 2 f max f o ) , where arms is defined above. With less accuracy, this relation fits the peak acceleration set of Hanks and Johnson (1976) as well, again with Δσ = 100 bars. At a fixed, close distance, we determine the magnitude dependence of amax to be log amax ∝ 0.30 M for 4≲M=ML≲612, close to that recently determined empirically by Joyner and Boore (1981) for 5.0 ≦ M ≦ 7.7, their coefficient on M (moment magnitude) being 0.25 ± 0.04. In the model presented here, the magnitude dependence of peak acceleration is a function of faulting duration alone; larger earthquakes have larger peak accelerations because they last longer, not because they are intrinsically more powerful at the high frequencies controlling peak acceleration. These well-behaved characteristics of high-frequency strong ground motion also suggest that the stress differences which develop in the course of crustal faulting are comparably well behaved, both in the average stress release across the characteristic source dimension and in the spectral composition and distribution of stress differences that develop across smaller dimensions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tectonic stress and the spectra of seismic shear waves from earthquakes
Brune, J. N. (1970) · Journal of Geophysical Research · doi:10.1029/jb075i026p04997 · Cited by 5,242
Hanks, T. C., & Kanamori, H. (1979) · Journal of Geophysical Research: Solid Earth · doi:10.1029/jb084ib05p02348 · Cited by 4,024
Self-citationTheoretical basis of some empirical relations in seismology
Kanamori, H., & Anderson, D. L. (1975) · CaltechAUTHORS (California Institute of Technology) · doi:10.1785/bssa0650051073 · Cited by 2,878
Source parameters of southern California earthquakes
Thatcher, W. R., & Hanks, T. C. (1973) · Journal of Geophysical Research Atmospheres · doi:10.1029/jb078i035p08547 · Cited by 503
Self-citationEarthquake stress drops, ambient tectonic stresses and stresses that drive plate motions
Hanks, T. C. (1977) · pure and applied geophysics · doi:10.1007/bf01637120 · Cited by 371
Self-citationDetermination of local magnitude, ML, from strong-motion accelerograms
Kanamori, H., & Jennings, P. C. (1978) · CaltechAUTHORS (California Institute of Technology) · doi:10.1785/bssa0680020471 · Cited by 130
Cited by
The Mechanics of Earthquakes and Faulting
Scholz, C. H. (2019) · Cambridge University Press eBooks · doi:10.1017/9781316681473 · Cited by 910
Asperities, barriers, characteristic earthquakes and strong motion prediction
Aki, K. (1984) · Journal of Geophysical Research: Solid Earth · doi:10.1029/jb089ib07p05867 · Cited by 419
Subset Simulation and its Application to Seismic Risk Based on Dynamic Analysis
Au, S. K., & Beck, J. L. (2003) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(2003)129:8(901 · Cited by 387
Reliability-based design sensitivity by efficient simulation
Au, S. K. (2005) · Computers & Structures · doi:10.1016/j.compstruc.2004.11.015 · Cited by 329
Kempton, J. J., & Stewart, J. P. (2006) · Earthquake Spectra · doi:10.1193/1.2358175 · Cited by 298
Metadata
- Authors
- Hanks, T. C., & McGuire, R. K.
- Venue
- Bulletin of the Seismological Society of America
- Published
- 1981-12-01
- Volume
- 71
- Issue
- 6
- Pages
- 2071-2095
- ISSN
- 0037-1106 (ISSN-L)
- 1943-3573
- OpenAlex
- W2286620461
- Cited by
- 822
- References
- 6
- FWCI
- 117.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The character of high-frequency strong ground motion. https://app.cochat.ai/papers/10.1785/bssa0710062071
- The paper
- Hanks, T. C., & McGuire, R. K. (1981). The character of high-frequency strong ground motion. Bulletin of the Seismological Society of America. https://doi.org/10.1785/bssa0710062071
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.