The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Site amplifications for generic rock sites
Abstract
Seismic shear-wave velocity as a function of depth for generic rock sites has been estimated from borehole data and studies of crustal velocities, and these velocities have been used to compute frequency-dependent amplifications for zero attenuation for use in simulations of strong ground motion. We define a generic rock site as one whose velocity at shallow depths equals the average of those from the rock sites sampled by the borehole data. Most of the boreholes are in populated areas; for that reason, the rock sites sampled are of particular engineering significance. We consider two generic rock sites: rock, corresponding to the bulk of the borehole data, and very hard rock, such as is found in glaciated regions in large areas of eastern North America or in portions of western North America. The amplifications on rock sites can be in excess of 3.5 at high frequencies, in contrast to the amplifications of less than 1.2 on very hard rock sites. The consideration of unattenuated amplification alone is computationally convenient, but what matters for ground-motion estimation is the combined effect of amplification and attenuation. For reasonable values of the attenuation parameter κ0, the combined effect of attenuation and amplification for rock sites peaks between about 2 and 5 Hz with a maximum level of less than 1.8. The combined effect is about a factor of 1.5 at 1 Hz and is less than unity for frequencies in the range of 10 to 20 Hz (depending on κ0). Using these amplifications, we find provisional values of about Δσ = 70 bars and κ0 = 0.035 sec for rock sites in western North America by fitting our empirically determined response spectra for an M 6.5 event to simulated values. The borehole data yield shear velocities (V30) of 618 and 306 m/sec for “rock” and “soil” sites, respectively, when averaged over the upper 30 m. From this, we recommend that V30 equals 620 and 310 m/sec for applications requiring the average velocity for rock and soil sites in western North America. By combining the amplifications for rock sites and the site factors obtained from our analysis of strong-motion data, we derive amplifications for sites with V30 = 520 m/sec (NEHRP class C, corresponding to a mix of rock and soil sites) and V30 = 310 and 255 m/sec (average soil and NEHRP class D sites, respectively). For the average soil site, the combined effect of amplification and attenuation exceeds a factor of 2.0 for frequencies between 0.4 and about 4 Hz, with a peak site effect of 2.4; the peak of the NEHRP class D site effect is 2.7.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Seismic velocity structure and composition of the continental crust: A global view
Christensen, N. I., & Mooney, W. D. (1995) · Journal of Geophysical Research: Solid Earth · doi:10.1029/95jb00259 · Cited by 2,952
Handbook of Physical Constants
(1966) · Geological Society of America eBooks · doi:10.1130/mem97 · Cited by 1,730
Poisson's ratio and crustal seismology
Christensen, N. I. (1996) · Journal of Geophysical Research: Solid Earth · doi:10.1029/95jb03446 · Cited by 1,704
1. Estimates of Site‐Dependent Response Spectra for Design (Methodology and Justification)
Borcherdt, R. D. (1994) · Earthquake Spectra · doi:10.1193/1.1585791 · Cited by 1,006
Seismic structure of the Transverse Ranges, California
HADLEY, D., & KANAMORI, H. (1977) · Geological Society of America Bulletin · doi:10.1130/0016-7606(1977)88<1469:ssottr>2.0.co;2 · Cited by 268
Hauksson, E., & Jones, L. M. (1988) · CaltechAUTHORS (California Institute of Technology) · doi:10.1785/bssa0780061885 · Cited by 50
Cited by
Subset Simulation and its Application to Seismic Risk Based on Dynamic Analysis
Au, S. K., & Beck, J. L. (2003) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(2003)129:8(901 · Cited by 387
Metadata
- Authors
- Boore, D. M., & Joyner, W. B.
- Venue
- Bulletin of the Seismological Society of America
- Published
- 1997-04-01
- Volume
- 87
- Issue
- 2
- Pages
- 327-341
- ISSN
- 0037-1106 (ISSN-L)
- 1943-3573
- OpenAlex
- W2103817435
- Cited by
- 895
- References
- 6
- FWCI
- 78.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Site amplifications for generic rock sites. https://app.cochat.ai/papers/10.1785/bssa0870020327
- The paper
- Boore, D. M., & Joyner, W. B. (1997). Site amplifications for generic rock sites. Bulletin of the Seismological Society of America. https://doi.org/10.1785/bssa0870020327
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.