The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Adsorption of arsenic to magnetite nanoparticles: Effect of particle concentration, pH, ionic strength, and temperature
Abstract
Little work has been conducted on the adsorption of arsenic to the mixed iron [Fe(II)/(III)] oxide magnetite and the effect that environmental parameters, such as pH, ionic strength, and temperature, have on adsorption. Magnetite nanoparticles are unique because of their affinity for both arsenate and arsenite and increased adsorption capacity from their bulk counterparts. This article shows the effect of various magnetite nanoparticle concentrations on arsenic adsorption kinetics. The adsorption data show the ability of the magnetite nanoparticles to remove arsenate and arsenite from solution in both synthetic and natural waters, and the data fit a first-order rate equation. Because of the increased surface area of these particles, less than 1 g/L of magnetite nanoparticles was needed. The results suggest that arsenic adsorption to the nanoparticles was not significantly affected by the pH, ionic strength and temperature in the ranges tested, which are typical of most potable water sources.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Arsenate and Chromate Retention Mechanisms on Goethite. 1. Surface Structure
Fendorf, S., Eick, M. J., Grossl, P., & Sparks, D. L. (1997) · Environmental Science & Technology · doi:10.1021/es950653t · Cited by 1,017
Cited by
Nanoadsorbents: Classification, Preparation, and Applications (with Emphasis on Aqueous Media)
Khajeh, M., Laurent, S., & Dastafkan, K. (2013) · Chemical Reviews · doi:10.1021/cr400086v · Cited by 528
Liu, C.-H., Chuang, Y.-H., Chen, T.-Y., Tian, Y., Li, H., Wang, M.-K., & Zhang, W. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b00381 · Cited by 398
Gómez-Pastora, J., Bringas, E., & Ortiz, I. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.06.119 · Cited by 396
Su, C. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.06.060 · Cited by 365
Metadata
- Authors
- Shipley, H. J., Yean, S., Kan, A. T., & Tomson, M. B.
- Venue
- Environmental Toxicology and Chemistry
- Publisher
- Oxford University Press (OUP)
- Published
- 2009-03-01
- Volume
- 28
- Issue
- 3
- Pages
- 509-515
- ISSN
- 0730-7268 (ISSN-L)
- 1552-8618
- OpenAlex
- W2127168400
- Cited by
- 160
- References
- 1
- FWCI
- 3.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Adsorption of arsenic to magnetite nanoparticles: Effect of particle concentration, pH, ionic strength, and temperature. https://app.cochat.ai/papers/10.1897/08-155.1
- The paper
- Shipley, H. J., Yean, S., Kan, A. T., & Tomson, M. B. (2009). Adsorption of arsenic to magnetite nanoparticles: Effect of particle concentration, pH, ionic strength, and temperature. Environmental Toxicology and Chemistry. https://doi.org/10.1897/08-155.1
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
