Finite element analysis of Cymbal piezoelectric transducers for harvesting energy from asphalt pavement
Open accessThe DOI matches its Crossref record.
Abstract
The purpose of this paper is to design a Cymbal for harvesting energy from asphalt pavement. Asphalt pavement is used popular on road. Part of the energies in the pavement caused by vehicle and gravity can be harvested by piezoelectric transducers. Cymbal is selected to harvest energy from asphalt pavement because of its low cost, high reliability and reasonable efficiency. The efficiency and coupling effects with pavement of Cymbals with various sizes are discussed through finite element analysis (FEA). The displacement difference at pavement surface between with and without Cymbal is developed to considering the coupling effects. The results show that the potential electric energy harvested from pavement increases with the diameter of Cymbal. However, the efficiency decreases with the increasing of Cymbal size. The diameter at 32 mm is suggested as the size of Cymbal. The potential electric energy increases near linearly with the diameter of end cap cavity base. Enough bonding area should be left to bond the end steel cap and PZT. There is a maximum electric energy existing when the top diameter of the end steel cap changes. The maximum electric energy is generated when the thickness of cap steel is about 0.3 mm. There is also a maximum electric energy existing when the height of end cap cavity changes. The Cymbals with thicker PZT can generate higher electric potential and storage electric energy. Considering the storage electric energy, cost, bonding between end steel cap and PZT and the pavement surface displacement, the Cymbal with 32 mm of total diameter, 22 mm of cavity base diameter, 10 mm of end cap top diameter, 0.3 mm of cap steel thickness, 2 mm of cavity height and 2 mm of PZT thickness is suggested as the optimum one for harvesting energy from asphalt pavement. The electric potential is about 97.33 V of the design Cymbal. 0.06 J electric energy can be storage in that Cymbal. Its potential maximum output power is about 1.2 mW at 20 Hz vehicle load frequency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wang, H., Jasim, A., & Chen, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.125 · Cited by 494
Mechanical modulations for enhancing energy harvesting: Principles, methods and applications
Zou, H.-X., Zhao, L.-C., Gao, Q.-H., Zuo, L., Liu, F.-R., Tan, T., Wei, K.-X., & Zhang, W.-M. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113871 · Cited by 377
A critical review of roadway energy harvesting technologies
Gholikhani, M., Roshani, H., Dessouky, S., & Papagiannakis, A. T. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114388 · Cited by 259
Feasible integration in asphalt of piezoelectric cymbals for vibration energy harvesting
Moure, A., Izquierdo Rodríguez, M. A., Rueda, S. H., Gonzalo, A., Rubio-Marcos, F., Cuadros, D. U., Pérez-Lepe, A., & Fernández, J. F. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.01.030 · Cited by 157
Floor Tile Energy Harvester for Self-Powered Wireless Occupancy Sensing
Sharpes, N., Vučković, D., & Priya, S. (2016) · Energy Harvesting and Systems · doi:10.1515/ehs-2014-0009 · Cited by 50
Metadata
- Authors
- ZHAO, H., YU, J., & LING, J.
- Venue
- Journal of the Ceramic Society of Japan
- Publisher
- Ceramic Society of Japan
- Published
- 2010
- Volume
- 118
- Issue
- 1382
- Pages
- 909-915
- ISSN
- 0914-5400 (ISSN-L)
- 1348-6535
- 1882-0743
- OpenAlex
- W2060979762
- Cited by
- 139
- References
- 0
- FWCI
- 6.08
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Finite element analysis of Cymbal piezoelectric transducers for harvesting energy from asphalt pavement. https://app.cochat.ai/papers/10.2109/jcersj2.118.909
- The paper
- ZHAO, H., YU, J., & LING, J. (2010). Finite element analysis of Cymbal piezoelectric transducers for harvesting energy from asphalt pavement. Journal of the Ceramic Society of Japan. https://doi.org/10.2109/jcersj2.118.909
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.