Quantitative mineralogy of sandstones by X-ray diffractometry and normative analysis
The DOI matches its Crossref record.
Abstract
Abstract Quantitative X-ray diffraction, normative calculation, and whole-rock chemical analysis have been compared for Permo-Triassic quartz-lithic to litho-feldspathic sandstones from eastern Australia. The quantitative XRD technique provides mineralogical percentages that correlate well with the chemical composition of the sandstones, and also with most of the mineral percentages derived from normative calculation. The need for assumptions on potassium distribution between minerals provides a limitation on estimates of K-feldspar and illite using the normative technique, although these can be improved on a sample-specific basis if necessary using complementary thin-section observations or qualitative X-ray diffractograms. Quantitative XRD analysis possibly indicates a small proportion of amorphous material in some of the sandstones, especially materials with abundant lithic fragments or clay minerals, but the proportion of any amorphous material overall is probably negligible. Both quantitative XRD and normative calculation avoid problems associated with sample heterogeneity or operator inconsistency that may affect point counting of thin sections. They can also be used to provide quantitative information on sediments with abundant rock fragments or matrix components, the actual mineralogy of which is not resolvable in conventional microscope investigations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Quantitative X-Ray Diffraction Analysis of Clay-Bearing Rocks From Random Preparations
Środoń, J., Drits, V. A., McCarty, D. K., Hsieh, J. C. C., & Eberl, D. D. (2001) · Clays and Clay Minerals · doi:10.1346/ccmn.2001.0490604 · Cited by 489
Effects of fly ash properties on carbonation efficiency in CO2 mineralisation
Ji, L., Yu, H., Zhang, R., French, D., Grigore, M., Yu, B., Wang, X., Yu, J., & Zhao, S. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.01.015 · Cited by 124
The CO2-binding by Ca-Mg-silicates in direct aqueous carbonation of oil shale ash and steel slag
Uibu, M., Kuusik, R., Andreas, L., & Kirsimäe, K. (2011) · Energy Procedia · doi:10.1016/j.egypro.2011.01.138 · Cited by 104
“Diffractograms were digitally registered within 2-50 2θ range and analyzed by Sirquant [18] code using full-profile Rietveld analysis [19].”
MethodCO2 mineral sequestration in oil shale wastes from Estonian power production
Uibu, M., Uus, M., & Kuusik, R. (2009) · Journal of Environmental Management · doi:10.1016/j.jenvman.2008.07.012 · Cited by 79
Hosseini, T., Selomulya, C., Haque, N., & Zhang, L. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b01609 · Cited by 44
Metadata
- Authors
- Ward, C. R., Taylor, J. C., & Cohen, D. R.
- Venue
- Journal of Sedimentary Research
- Publisher
- Society for Sedimentary Geology
- Published
- 1999-09-01
- Volume
- 69
- Issue
- 5
- Pages
- 1050-1062
- ISSN
- 0022-4472 (ISSN-L)
- 1527-1404
- OpenAlex
- W2126912780
- Cited by
- 80
- References
- 0
- FWCI
- 6.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Quantitative mineralogy of sandstones by X-ray diffractometry and normative analysis. https://app.cochat.ai/papers/10.2110/jsr.69.1050
- The paper
- Ward, C. R., Taylor, J. C., & Cohen, D. R. (1999). Quantitative mineralogy of sandstones by X-ray diffractometry and normative analysis. Journal of Sedimentary Research. https://doi.org/10.2110/jsr.69.1050
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.