CoChat

MISSISSIPPIAN NON-SUPRATIDAL DOLOMITE, STE, GENEVIEVE LIMESTONE, ILLINOIS BASIN: EVIDENCE FOR MIXED-WATER DOLOMITIZATION

CHOQUETTE, PHILIP W., STEINEN, RANDOLPH P. · 1980 · Concepts and Models of Dolomitization
Cited by 71

The DOI matches its Crossref record.

Abstract

In a 140 km2 subsurface area along the La Salle anticline, southeastern Illinois, a 5–12 m sequence of shaUow-marine, subtidal lime mudstone and wackestone in the upper Ste. Genevieve Limestone (Meramecian) has been altered in pa?chy fashion to porous (25–40%), oil-productive, microcrystalline dolomite. Information from about 150 wells (46 cored) shows the dolomite to occur in lens-shaped bodies up to 12 m (38 ft) thick, 0.5–2.5 km (0.3–1.5 mi) across by 1–5 km (0.6–3 mi) long, in places probably interconnected, and strongly oriented E-W to NE-SW. The dolomite interfingers with lime mudstone/wackestone, which it closely resembles in primary and bioturbate structures, preserved and inferred megafossils, and clay and detrital silt content (<7%). Muddy lime sediments were the precursors. There is no evidence of either deposition or dolomitization under supratidal conditions. Typical dolomite consists of sharply terminated, clear, 5–20 μm rhombs, each composed in cathodoluminescence of a very dully luminescing core, a younger bright overgrowth, and in some sequences a still younger dull overgrowth. Bulk isotopie compositions are relatively heavy (mean δ13C and δ18O + 2.4 and +2.0% VS PDB); Sr+2 is substantially lower (mean 166 ppm) and Na+ somewhat lower (mean 810 ppm) than those of Holocene supratidal or penesaline-lagoon dolomite. A later generation of coarse, equant-blocky, iron-rich dolomite cement has similar δ13C but much lower δ18O (mean −6.0‰) and locally fills molds, fractures, and veins (Choquette, 1971). Dolomite and lime mudstone/wackestone underlie a swarm of elongate lenses of ooid grainstone and sandy ooid-pellet packstone/grainstone that have orientations and areal dimensions like those of the dolomite lenses. Oohte bodies have in places small amounts of freshwater-vadose and beachrock cements, suggesting short-lived exposure, but show few or no signs of dissolution. subaerial exposure seems to have been brief but sufficient to create freshwater lenses. Many dolomite lenses he directly under carbonate sand bodies. Muddy parts of carbonate sands are commonly altered to microcrystalline dolomite with similar fabrics, isotopie compositions, and cathodoluminescence. These considerations suggest that dolomitization took place in a hydrologie system of mixed meteoric and marine origin. Dolomitization began early in the burial history, perhaps in mixing zones of local freshwater lenses after some compaction but while porosities were high. subsequently, the hydrology was influenced by recharge areas to the northeast and groundwater flow was mainly through carbonate sand bodies, which strongly influenced dolomitization patterns.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.2110/pec.80.28.0163

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

Metadata

Authors
CHOQUETTE, P. W., & STEINEN, R. P.
Venue
Concepts and Models of Dolomitization
Published
1980
Pages
163-196
OpenAlex
W2199863941
Cited by
71
References
0
FWCI
2.22
Type
book chapter
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.