The DOI matches its OpenAlex record; 127 of the 127 references it cites were found in a registry or an index.
Tectono-Magmatic Precursors for Porphyry Cu-(Mo-Au) Deposit Formation
Abstract
Porphyry Cu-(Mo-Au) deposits are relatively rare but reproducible products of subduction-related magmatism. No unique processes appear to be required for their formation, although additive combinations of common tectono-magmatic processes, or optimization of these processes, can affect the grade and size as well as the location of the resulting deposits. These various contributing processes are reviewed, from partial melting in the mantle wedge overlying the subducting plate, through processes of magma interaction with the lithosphere, to mechanisms for magma emplacement and volatile exsolution in the upper crust. Specific ore-forming processes, such as magmatic-hydrothermal fluid evolution, are not discussed. Hot, hydrous, relatively oxidized, sulfur-rich mafic magmas (predominantly basalts) generated in the metasomatized mantle wedge above a subducting oceanic slab rise buoyantly to the base of the overlying crust where they stall due to density contrasts. Because these magmas are oxidized, sulfur is dominantly present as sulfate, and chalcophile elements such as Cu and Au are incompatible (i.e., they are retained in the melt). As these magmas begin to crystallize they release heat which causes partial melting of crustal rocks. Mixing between crustal- and mantle-derived magmas yields evolved (andesitic to dacitic), volatile-rich, metalliferous, hybrid magmas, which are of sufficiently low density to rise through the crust. Magma ascent is driven primarily by buoyancy forces and is dominantly a fracture-controlled phenomenon. As such, crustal stress and strain patterns play an important role in guiding the ascent of magma from the lower crust. In particular, translithospheric, orogen-parallel, strike-slip structures serve as a primary control on magma emplacement in many volcanic arcs worldwide. A feedback mechanism operates, whereby preexisting faults facilitate magma ascent, the heat from which further weakens the crust and focuses strain. Certain structural geometries, such as fault jogs, step-overs, and fault intersections, offer low-stress extensional volumes during transpressional strain. Such sites represent vertical conduits of relatively high permeability, up which magmas will preferentially ascend. Large upper crustal plutonic complexes may therefore be localized within these structural settings. Having delivered a sufficient volume of evolved, fertile arc magma to a focused position in the upper crust, magmatic fractionation, recharge, and volatile exsolution lead to the development of ore-forming magmatic-hydrothermal systems. To a first approximation, the size of the resulting deposit will be limited by the magma volume delivered to the upper crustal magma chamber. System-specific details such as magmatic-hydrothermal evolution, the nature of the country rocks, and subsequent erosional and weathering history will ultimately control the value of the deposit, but these factors fall outside the scope of this paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sun, S.-S., & McDonough, W. F. (1989) · Geological Society, London, Special Publications · doi:10.1144/gsl.sp.1989.042.01.19 · Cited by 16,410
Geochimica et Cosmochimica Acta
Blair, N. E. (1992) · Geochimica et Cosmochimica Acta · doi:10.1016/0016-7037(92)90334-f · Cited by 4,544
Derivation of some modern arc magmas by melting of young subducted lithosphere
Defant, M. J., & Drummond, M. S. (1990) · Nature · doi:10.1038/347662a0 · Cited by 4,351
Orogenic Andesites and Plate Tectonics
Gill, J. B. (1981) · Minerals and Rocks · doi:10.1007/978-3-642-68012-0 · Cited by 3,543
Tectonic Implications of the Composition of Volcanic ARC Magmas
Pearce, J. A., & Peate, D. W. (1995) · Annual Review of Earth and Planetary Sciences · doi:10.1146/annurev.ea.23.050195.001343 · Cited by 2,779
Crustal contributions to arc magmatism in the Andes of Central Chile
Hildreth, W., & Moorbath, S. (1988) · Contributions to Mineralogy and Petrology · doi:10.1007/bf00372365 · Cited by 2,269
Role of the sub-continental lithosphere in magma genesis at active continental margins
Pearce, J. A. (1983) · Cited by 2,021
First‐ and second‐order patterns of stress in the lithosphere: The World Stress Map Project
Zoback, M. L. (1992) · Journal of Geophysical Research: Solid Earth · doi:10.1029/92jb00132 · Cited by 1,891
Adakitic magmas: Modern analogues of Archaean granitoids
Martin, H. (1999) · Lithos · doi:10.1016/s0024-4937(98)00076-0 · Cited by 1,642
Tectonics of the zagros orogenic belt of iran: new data and interpretations
Alavi, M. (1994) · Tectonophysics · doi:10.1016/0040-1951(94)90030-2 · Cited by 1,532
Cited by
Sillitoe, R. H. (2010) · Economic Geology · doi:10.2113/gsecongeo.105.1.3 · Cited by 3,419
Special Paper: Adakite-Like Rocks: Their Diverse Origins and Questionable Role in Metallogenesis
Richards, J. P., & Kerrich, R. (2007) · Economic Geology · doi:10.2113/gsecongeo.102.4.537 · Cited by 964
Self-citationMagmatic to hydrothermal metal fluxes in convergent and collided margins
Richards, J. P. (2011) · Ore Geology Reviews · doi:10.1016/j.oregeorev.2011.05.006 · Cited by 805
Self-citationHIGH Sr/Y ARC MAGMAS AND PORPHYRY Cu Mo Au DEPOSITS: JUST ADD WATER
Richards, J. P. (2011) · Economic Geology · doi:10.2113/econgeo.106.7.1075 · Cited by 602
Self-citationThe oxidation state, and sulfur and Cu contents of arc magmas: implications for metallogeny
Richards, J. P. (2015) · Lithos · doi:10.1016/j.lithos.2014.12.011 · Cited by 529
Self-citationHou, Z., Yang, Z., Lu, Y., Kemp, A., Zheng, Y., Li, Q., Tang, J., Yang, Z., & Duan, L. (2015) · Geology · doi:10.1130/g36362.1 · Cited by 525
Shafiei, B., Haschke, M., & Shahabpour, J. (2009) · Mineralium Deposita · doi:10.1007/s00126-008-0216-0 · Cited by 421
A review of machine learning in processing remote sensing data for mineral exploration
Shirmard, H., Farahbakhsh, E., Müller, R. D., & Chandra, R. (2022) · Remote Sensing of Environment · doi:10.1016/j.rse.2021.112750 · Cited by 420
Hou, Z., Yang, Z., Qu, X., Meng, X., Li, Z., Beaudoin, G., Rui, Z., Gao, Y., & Zaw, K. (2009) · Ore Geology Reviews · doi:10.1016/j.oregeorev.2008.09.006 · Cited by 418
Metallogenesis of the Tibetan collisional orogen: A review and introduction to the special issue
Hou, Z., & Cook, N. J. (2009) · Ore Geology Reviews · doi:10.1016/j.oregeorev.2009.05.001 · Cited by 371
ZIRCON COMPOSITIONAL EVIDENCE FOR SULFUR-DEGASSING FROM ORE-FORMING ARC MAGMAS
Dilles, J. H., Kent, A. J. R., Wooden, J. L., Tosdal, R. M., Koleszar, A., Lee, R. G., & Farmer, L. P. (2015) · Economic Geology · doi:10.2113/econgeo.110.1.241 · Cited by 351
Hou, Z., Zhang, H., Pan, X., & Yang, Z. (2011) · Ore Geology Reviews · doi:10.1016/j.oregeorev.2010.09.002 · Cited by 330
A Detailed Assessment of Global Nickel Resource Trends and Endowments
Mudd, G. M., & Jowitt, S. M. (2014) · Economic Geology · doi:10.2113/econgeo.109.7.1813 · Cited by 308
Yang, Z.-M., Lu, Y.-J., Hou, Z.-Q., & Chang, Z.-S. (2015) · Journal of Petrology · doi:10.1093/petrology/egu076 · Cited by 306
Tabelin, C. B., Park, I., Phengsaart, T., Jeon, S., Villacorte-Tabelin, M., Alonzo, D., Yoo, K., Ito, M., & Hiroyoshi, N. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2021.105610 · Cited by 278
Shen, P., Hattori, K., Pan, H., Jackson, S., & Seitmuratova, E. (2015) · Economic Geology · doi:10.2113/econgeo.110.7.1861 · Cited by 274
Origin of postcollisional magmas and formation of porphyry Cu deposits in southern Tibet
Wang, R., Weinberg, R. F., Collins, W. J., Richards, J. P., & Zhu, D.-C. (2018) · Earth-Science Reviews · doi:10.1016/j.earscirev.2018.02.019 · Cited by 264
Self-citationGroves, D. I. (2005) · Economic Geology · doi:10.2113/100.2.203 · Cited by 262
Wang, R., Richards, J. P., Hou, Z.-Q., Yang, Z.-M., Gou, Z.-B., & DuFrane, S. A. (2014) · Economic Geology · doi:10.2113/econgeo.109.7.1943 · Cited by 258
Self-citationHou, Z., Zheng, Y., Yang, Z., Rui, Z., Zhao, Z., Jiang, S., Qu, X., & Sun, Q. (2013) · Mineralium Deposita · doi:10.1007/s00126-012-0415-6 · Cited by 255
Metadata
- Authors
- Richards, J. P.
- Venue
- Economic Geology
- Published
- 2003-12-01
- Volume
- 98
- Issue
- 8
- Pages
- 1515-1533
- ISSN
- 0361-0128 (ISSN-L)
- OpenAlex
- W2154628848
- Cited by
- 1,063
- References
- 127
- FWCI
- 6.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.