The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
The Hydrothermal Geochemistry of Tungsten in Granitoid Environments: I. Relative Solubilities of Ferberite and Scheelite as a Function of T, P, pH, and mNaCl
Abstract
The characteristics of granitoid-related tungsten deposits hosted in siliceous (carbonate-free) rocks (e.g., Panasqueira, Cligga Head, Pasto Bueno) are reviewed and the ranges of physicochemical parameters of the ore-forming fluids are summarized. The two important tungsten minerals in these deposits are wolframite and scheelite, which were deposited mostly between 200° and 500°C and 200 and 1,500 bars. The salinities of the mineralizing fluids were typically less than 15 wt percent but commonly were significantly higher (up to 55 wt %). The two predominant dissolved components are Na+ and Cl– with subordinate Ca2+, K+, and carbonate species (\batchmode \documentclass[fleqn,10pt,legalpaper]{article} \usepackage{amssymb} \usepackage{amsfonts} \usepackage{amsmath} \pagestyle{empty} \begin{document} \(CO_{3}^{2{\mbox{--}}}\) \end{document}/HCO3–). The contents of CO2 are highly variable, but XCO2 values typically range from 0 to 0.1. Limited pH and f O2 estimates indicate a moderately acidic fluid with oxygen fugacities between those of the QFM and HM buffers. These parameters were used to guide solubility and speciation modeling of W in hydrothermal fluids in granitoid environments. Experimentally derived thermodynamic data for scheelite, ferberite, aqueous Ca, Fe, and W species, and other required aqueous species were critically evaluated and the most reliable data were adopted. Where necessary, missing data were estimated. The resultant thermodynamic database provides a basis for solubility and speciation calculations in the system Ca-Fe-W-Cl-O-H. The simultaneous solubilities of scheelite and ferberite in NaCl-HCl-H2O solutions were calculated at temperatures from 200° to 600°C, pressures from 500 to 1,000 bars, pH from 3 to 6, and m NaCl from to 0.1 to 5.0 moles/kg H2O. The solubility model takes account of the species H+, OH–, Na+, Cl–, NaCl, HCl, NaOH, H2\batchmode \documentclass[fleqn,10pt,legalpaper]{article} \usepackage{amssymb} \usepackage{amsfonts} \usepackage{amsmath} \pagestyle{empty} \begin{document} \(WO_{4}^{0}\) \end{document}, \batchmode \documentclass[fleqn,10pt,legalpaper]{article} \usepackage{amssymb} \usepackage{amsfonts} \usepackage{amsmath} \pagestyle{empty} \begin{document} \(HWO_{4}^{{\mbox{--}}}\) \end{document}, \batchmode \documentclass[fleqn,10pt,legalpaper]{article} \usepackage{amssymb} \usepackage{amsfonts} \usepackage{amsmath} \pagestyle{empty} \begin{document} \(WO_{4}^{2{\mbox{--}}}\) \end{document}, Fe2+, FeCl+, \batchmode \documentclass[fleqn,10pt,legalpaper]{article} \usepackage{amssymb} \usepackage{amsfonts} \usepackage{amsmath} \pagestyle{empty} \begin{document} \(FeCl_{2}^{0}\) \end{document}, FeOH+, FeO, \batchmode \documentclass[fleqn,10pt,legalpaper]{article} \usepackage{amssymb} \usepackage{amsfonts} \usepackage{amsmath} \pagestyle{empty} \begin{document} \(HFeO_{2}^{{\mbox{--}}}\) \end{document}, Ca2+, CaCl+, \batchmode \documentclass[fleqn,10pt,legalpaper]{article} \usepackage{amssymb} \usepackage{amsfonts} \usepackage{amsmath} \pagestyle{empty} \begin{document} \(CaCl_{2}^{0}\) \end{document}, CaOH+, \batchmode \documentclass[fleqn,10pt,legalpaper]{article} \usepackage{amssymb} \usepackage{amsfonts} \usepackage{amsmath} \pagestyle{empty} \begin{document} \(NaHWO_{4}^{0}\) \end{document}, and \batchmode \documentclass[fleqn,10pt,legalpaper]{article} \usepackage{amssymb} \usepackage{amsfonts} \usepackage{amsmath} \pagestyle{empty} \begin{document} \(NaWO_{4}^{{\mbox{--}}}\) \end{document}. The calculations indicate the following: (1) solubilities of scheelite and/or ferberite can attain values as high as hundreds to thousands of parts per million as the tungstate species H2\batchmode \documentclass[fleqn,10pt,legalpaper]{article} \usepackage{amssymb} \usepackage{amsfonts} \usepackage{amsmath} \pagestyle{empty} \begin{document} \(WO_{4}^{0}\) \end{document}, \batchmode \documentclass[fleqn,10pt,legalpaper]{article} \usepackage{amssymb} \usepackage{amsfonts} \usepackage{amsmath} \pagestyle{empty} \begin{document} \(HWO_{4}^{{\mbox{--}}}\) \end{document}, \batchmode \documentclass[fleqn,10pt,legalpaper]{article} \usepackage{amssymb} \usepackage{amsfonts} \usepackage{amsmath} \pagestyle{empty} \begin{document} \(WO_{4}^{2{\mbox{--}}}\) \end{document}, \batchmode \documentclass[fleqn,10pt,legalpaper]{article} \usepackage{amssymb} \usepackage{amsfonts} \usepackage{amsmath} \pagestyle{empty} \begin{document} \(NaHWO_{4}^{0}\) \end{document}, and \batchmode \documentclass[fleqn,10pt,legalpaper]{article} \usepackage{amssymb} \usepackage{amsfonts} \usepackage{amsmath} \pagestyle{empty} \begin{document} \(NaWO_{4}^{{\mbox{--}}}\) \end{document}; thus, tungsten-chloride, -fluoride, or -carbonate complexes, or more exotic species are not required to transport sufficient W to form an ore deposit; (2) the tungsten concentration in equilibrium with scheelite and ferberite increases strongly with increasing temperature, increasing NaCl concentration and decreasing pH, but is only
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pearson, R. G. (1963) · Journal of the American Chemical Society · doi:10.1021/ja00905a001 · Cited by 10,475
Geochimica et Cosmochimica Acta
Blair, N. E. (1992) · Geochimica et Cosmochimica Acta · doi:10.1016/0016-7037(92)90334-f · Cited by 4,544
Thermochemical properties of inorganic substances
Barin, I., Knacke, O., & Kubaschewski, O. (1977) · Springer eBooks · doi:10.1007/978-3-662-02293-1 · Cited by 4,521
Stability constants of metal-ion complexes
Sillén, L. G., Martell, A. E., Bjerrum, J., & Schwarzenbach, G. (1964) · Medical Entomology and Zoology · Cited by 3,983
Johnson, J. W., Oelkers, E. H., & Helgeson, H. C. (1992) · Computers & Geosciences · doi:10.1016/0098-3004(92)90029-q · Cited by 2,639
Helgeson, H. C., Kirkham, D. H., & Flowers, G. C. (1981) · American Journal of Science · doi:10.2475/ajs.281.10.1249 · Cited by 1,792
Thermodynamics of hydrothermal systems at elevated temperatures and pressures
Helgeson, H. C. (1969) · American Journal of Science · doi:10.2475/ajs.267.7.729 · Cited by 1,547
Slaty cleavage and related strain in Martinsburg Slate, Delaware Water Gap, New Jersey
Beutner, E. C. (1978) · American Journal of Science · doi:10.2475/ajs.278.1.1 · Cited by 1,513
Wilhoit, R. C., Chao, J., & Hall, K. R. (1985) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555747 · Cited by 1,086
Cited by
Dill, H. G. (2010) · Earth-Science Reviews · doi:10.1016/j.earscirev.2009.10.011 · Cited by 431
A review of tungsten: From environmental obscurity to scrutiny
Koutsospyros, A., Braida, W., Christodoulatos, C., Dermatas, D., & Strigul, N. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.11.007 · Cited by 364
Fluid Inclusions in Hydrothermal Ore Deposits
Bodnar, R. J., Lecumberri-Sanchez, P., Moncada, D., & Steele-MacInnis, M. (2014) · Treatise on Geochemistry · doi:10.1016/b978-0-08-095975-7.01105-0 · Cited by 364
Brugger, J., Liu, W., Etschmann, B., Mei, Y., Sherman, D. M., & Testemale, D. (2016) · Chemical Geology · doi:10.1016/j.chemgeo.2016.10.021 · Cited by 308
Formation of tin ore deposits: A reassessment
Lehmann, B. (2021) · Lithos · doi:10.1016/j.lithos.2020.105756 · Cited by 292
Metadata
- Authors
- Wood, S. A., & Samson, I. M.
- Venue
- Economic Geology
- Publisher
- Society of Economic Geologists, Inc.
- Published
- 2000-01-01
- Volume
- 95
- Issue
- 1
- Pages
- 143-182
- ISSN
- 0361-0128 (ISSN-L)
- OpenAlex
- W2086213893
- Cited by
- 382
- References
- 49
- FWCI
- 3.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Hydrothermal Geochemistry of Tungsten in Granitoid Environments: I. Relative Solubilities of Ferberite and Scheelite as a Function of T, P, pH, and mNaCl. https://app.cochat.ai/papers/10.2113/gsecongeo.95.1.143
- The paper
- Wood, S. A., & Samson, I. M. (2000). The Hydrothermal Geochemistry of Tungsten in Granitoid Environments: I. Relative Solubilities of Ferberite and Scheelite as a Function of T, P, pH, and mNaCl. Economic Geology. https://doi.org/10.2113/gsecongeo.95.1.143
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.