Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 487

The DOI matches its Crossref record.

Petrophysical Parameters Estimated From Visual Descriptions of Carbonate Rocks: A Field Classification of Carbonate Pore Space

Lucia, F.J.·1983·Journal of Petroleum Technology

Abstract

Summary: The permeability, capillary properties. and m values of carbonate rocks are related to the particle size, amount of interparticle porosity, amount of separate vug porosity, and the presence or absence of touching vugs. Particle size. percent separate vug porosity, and the presence or absence of touching vugs usually can be determined visually. The amount of interparticle porosity is more difficult to determine visually and is done best by subtracting the visual estimate of separate vug porosity from the measure of total porosity obtained from wireline porosity logs or laboratory measurements. In the absence of touching vugs, the permeability, in values, and capillary properties can be estimated if the particle size, percent separate vug porosity, and total porosity are known. No acceptable method has been developed to estimate visually the permeability of touching vugs. A classification of carbonate porosity is proposed based on the data presented. This classification is intended to be used in the field or for routine laboratory description. Interparticle porosity is classified according to particle size and the dense or porous appearance of the interparticle area. Vuggy porosity is classified according to type of interconnection. Separate vugs are connected through the interparticle pore space and classified by percent porosity. Touching vugs are connected to each other and classified by presence or absence. Introduction: The role played by the visual description of pore space in carbonate rocks in the field evaluation of a well has changed dramatically over the past 25 to 30 years. The change has been brought about by the development of new and improved logging techniques. The Archie classification, developed in 1952, was the only method at that time to estimate the amount of porosity in uncored wells. The development of porosity wireline tools (neutron, sonic, and density) has provided us with effective ways to measure wellbore porosity. The permeability of a carbonate rock, however, can not be measured directly by wireline tools and it is not directly related to total porosity. Visual descriptions of the pore geometry, therefore, still are needed to estimate permeability. While the Archie classification provides some insight into permeability relationships, new data presented here allow more accurate estimates. In addition, the relationship between pore types and Archie's m value and capillarity can be described. The role that the visual description of pore space can play in the evaluation is to describe factors that cannot be obtained from logging techniques but that are needed together with the logs to calculate saturations and productive capacities of the reservoir rock. This paper describes the basic geologic parameters that control the petrophysical parameters and shows how they are related. JPT P. 629^

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.2118/10073-pa

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 487

Metadata

Authors
Lucia, F. J.
Venue
Journal of Petroleum Technology
Published
1983-03-01
Volume
35
Issue
03
Pages
629-637
ISSN
  • 0149-2136 (ISSN-L)
  • 1944-978X
OpenAlex
W2076098565
Cited by
487
References
0
FWCI
2.45
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Petrophysical Parameters Estimated From Visual Descriptions of Carbonate Rocks: A Field Classification of Carbonate Pore Space. https://app.cochat.ai/papers/10.2118/10073-pa
The paper
Lucia, F. J. (1983). Petrophysical Parameters Estimated From Visual Descriptions of Carbonate Rocks: A Field Classification of Carbonate Pore Space. Journal of Petroleum Technology. https://doi.org/10.2118/10073-pa

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.