Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 275

The DOI matches its Crossref record.

Relationship Between Horizontal Stress and Depth in Sedimentary Basins

Breckels, I.M., van Eekelen, H.A.M.·1982·Journal of Petroleum Technology

Abstract

Summary: Previous work on establishing a relationship between in-situ stress and depth is reviewed. On the basis of data from literature, supplemented by available field data, equations are proposed to describe the trend of horizontal stress with depth for normally pressured formations in the U.S. gulf coast region. A separate correlation between horizontal stress and pore pressure allows this trend to be extended to formations containing abnormal pore pressures. Having achieved a good correlation for data from this well-documented region, we repeat the process for other parts of the world, using data from hydraulic fracture treatments and formation integrity (leakoff) tests. Similar relationships between horizontal stress and depth are found to hold for normally pressured areas that are geologically and tectonically similar to the U.S. gulf coast. Coupled with regional correlations between horizontal stress and pore pressure, these relationships enable horizontal stress levels to be estimated for a given depth, provided the pore pressure also is known. Introduction: The instantaneous shut-in pressure (ISIP) recorded during or after a fracturing job or during a minifracture test provides a good approximation to the minimum principal in-situ total stress components sHmin. The vertical total stress or overburden stress sV (normally the maximum principal in-situ stress) can be derived by integration of the formation density, compensated (FDC) log. In tectonically inactive areas, the intermediate principal stress, sHmax, can be assumed approximately equal to the minimum principal stress: sHminsHmax<sV. In the more general case, when sHmax>sHmin, the value of sHmax in principle can be derived from the formation breakdown pressure pb as measured at the start of a fracturing job. For a fully plastering fluid, for instance, pb 3sHmin-sHmax-Pc where Pc is the pore pressure. In practice, however, sHmax cannot be determined accurately because the breakdown value will be influenced by hole geometry, hole integrity, mud-cake properties, and the extent to which the fluid penetrates into and pressurizes the pore space around the borehole. Also, hydraulic fracturing data are often lacking in many areas of the world. The only remaining way, then, to obtain information relation to in-situ stresses is to analyze the results of formation integrity tests (leakoff tests and casing-seat tests). In these tests, the pressure at which the formation starts taking fluid may range from sHmin to 2sHmin-Pc. Therefore, it is the lower end of the range of values from formation-integrity tests that is of interest for in-situ stress determination. Review of Previous Work: The majority of hydraulic fracturing/formation-integrity test data quoted in literature are from the U.S. gulf coast and Santa Barbara Channel (CA). From these data, a number of authors have derived fracture gradient correlations to be used in planning drilling programs.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.2118/10336-pa

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 275

Metadata

Authors
Breckels, I. M., & van Eekelen, H. A. M.
Venue
Journal of Petroleum Technology
Published
1982-09-01
Volume
34
Issue
09
Pages
2191-2199
ISSN
  • 0149-2136 (ISSN-L)
  • 1944-978X
OpenAlex
W1995146890
Cited by
275
References
0
FWCI
4.15
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Relationship Between Horizontal Stress and Depth in Sedimentary Basins. https://app.cochat.ai/papers/10.2118/10336-pa
The paper
Breckels, I. M., & van Eekelen, H. A. M. (1982). Relationship Between Horizontal Stress and Depth in Sedimentary Basins. Journal of Petroleum Technology. https://doi.org/10.2118/10336-pa

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.